STBDAO8210K - standard digital output kit - Modicon STB - 115..230 V AC - 2 O

STBDAO8210K

standard digital output kit - Modicon STB - 115..230 V AC - 2 O

Add to Quote Catalogue

Specifications

Product Certifications	UL CSA FM Class 1 Division 2
Standards	IEC 61131-2
Shock Resistance	30 gn 11 ms IEC 88 reference 2-27
Vibration Resistance	3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail +/-0.35 mm 10-58 Hz
Ip Degree Of Protection	IP20 conforming to IEC 61131-2 class 1
Pollution Degree	2 IEC 60664-1
Ambient Air Temperature For Storage	-40-85 °C without derating
Relative Humidity	95-95 % 60-60 °C without condensation
Operating Altitude	<= 6561.68 ft (2000 m)
Ambient Air Temperature For Operation	32...140 °F without derating
Warranty	18 months
Rohs Exemption Information	Yes
Mercury Free	Yes
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Insulation Between Channels And Logic Bus	1780 V for 1 minute
Cold Swapping	yes
Height	18.4 mm
Reset	manual or automatic reset COM fault
Absolute Maximum Voltage	300 V 10 s 400 V 20 ms
Discrete Output Logic	positive or negative
Status Led	1 LED (Green) module status (RDY) 1 LED per channel (Green) channel status (OUT1 to OUT2) 1 LED (Red) module error (ERR)
Output Voltage	20...265 V AC
Hot Swapping Fallback	yes for standard NIMs
Supply	power distribution module
Response Time	10 ms off-to-on 10.5 ms on-to-off
Protection Type	output surge protection varistance and RC circuit
Surge Current	20 A 40 ms 30 A 20 ms
Current Consumption	45 mA 5 V DC logic bus
Marking	CE
Net Weight	0.125 kg
Discrete Output Current	1000 mA 60 °C 2000 mA 30 °C
Fallback Status	state 0 basic NIMs user configurable standard NIMs
Minimum Load	5 mA
Width	128.3 mm
Overvoltage Category	II
Depth	70 mm
Product Compatibility	I/O base STBXBA2000 power distribution module STBPDT2100/2105
Maximum Leakage Current	2 mA at state 0 115 V 2.5 mA at state 0 230 V
Country of Origin	United States
Width	128.3 mm
Height	18.4 mm
Weight	0.125 kg
Discrete Output Type	triac
Range Of Product	Modicon STB distributed I/O solution
Discrete Output Voltage Type	AC
Product Or Component Type	standard digital output kit
Discrete Output Voltage	115...230 V
Discrete Output Number	2
Kit Composition	STBXTS1100, 5-terminal screw type connector STBDAO8210 module STBXTS2110, 5-terminal spring clamp connector STBXBA2000 base

standard digital output kit - Modicon STB - 115..230 V AC - 2 O

Specifications

Documents

Royal Wholesale Electric