SSM3A325F7 - single phase relay, Harmony Solid State Modular Relays, 25A, DIN rail mount, zero voltage switching, input 90 to 140V AC, output 48 to 600V AC

SSM3A325F7

single phase relay, Harmony Solid State Modular Relays, 25A, DIN rail mount, zero voltage switching, input 90 to 140V AC, output 48 to 600V AC

This static relay has a built-in heatsink for limited derating while limiting occupied space in panel It also has a visual indicator showing the status of its input Its rated current is 25 A, is controlled with a 90 to 140 V AC circuit, has a rated load voltage of 48 to 600 V AC output. It mounts on symetrical DIN rails and comes with a secure mounting latch

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Cos Phi	0.5-0.5 (with maximum load)
[Uc] Control Circuit Voltage	90...140 V AC
Output Voltage	48...600 V AC
Maximum Horse Power Rating	1 hp 40 °C 240 V AC 2 hp 40 °C 380 V AC 3 hp 40 °C 480 V AC
Tightening Torque	0.6...0.7 N.m for input 1.36...1.7 N.m for output
Insulation Resistance	1000 MOhm
Mounting Support	symmetrical DIN rail
Maximum I²T For Fusing	410 A².s for 10 ms at 50 Hz 374 A².s for 8.3 ms at 60 Hz
Maximum Voltage Drop	<1.35 V on-state
Connections - Terminals	screw terminals 0.2...1.3 mm², AWG 24...AWG 16) input screw terminals 1.3...5.3 mm², AWG 16...AWG 10) output
Surge Current	286 A 20 ms 50 Hz 300 A 16.6 ms 60 Hz
Response Time	30 ms (turn-off) 20 ms (turn-on)
Load Current	0.1-25 A
Net Weight	0.74 kg
Maximum Leakage Current	0.25 mA off-state
Control Type	without test button
Absolute Maximum Voltage	1100 V
Dv/Dt	500 V/µs off-state at maximum voltage
Local Signalling	for input status LED (green)
Solid State Output Type	zero voltage switching
Capacitance Unbalance	8 pF for input/output
Line Rated Current	25 A
Switching Voltage	90 V turn-on 10 V turn-off
Width	90 mm
Input Current Limits	15-19 mA
Overvoltage Category	III
Country of Origin	Mexico
Width	90 mm
Weight	0.74 kg
Range Of Product	Harmony Solid State Relays
Output Switching Mode	zero voltage switching
Product Or Component Type	modular DIN rail relay
Phase	3 phase
Number Of Channels	3
Device Short Name	SSM3
Product Certifications	UL EAC CSA
Ambient Air Temperature For Operation	-20-80 °C
Standards	IEC 60950-1 UL 508 CSA C22.2 No 14
Pollution Degree	2
Dielectric Strength	4 kV AC for input/output 4 kV AC for input or output to case
Marking	CSA UL CE EAC
Ip Degree Of Protection	IP20
Ambient Air Temperature For Storage	-40-100 °C
Rohs Exemption Information	Yes
Mercury Free	Yes
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation	X
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)

single phase relay, Harmony Solid State Modular Relays, 25A, DIN rail mount, zero voltage switching, input 90 to 140V AC, output 48 to 600V AC

Specifications

Documents

Royal Wholesale Electric