DIN rail mount relay, Harmony Solid State Relays, 35A,Voltage switching, input 4...32V DC, output 48...600V AC
This solid state DIN rail mounted relay belongs to the Schneider Electric Harmony solid state relays range. This electrical relay mounts on 35mm DIN rail and comes with a secure mounting latch. This is a 35A power rated relay with pluggable spring input contactor type configuration and zero voltage switching. This single-phase relay has a IP20 built-in heat sink and a built-in transient overvoltage protection. It is controlled with a 4Vdc to 32Vdc input, has a rated load voltage of 48Vac to 600Vac. It also has a LED input voltage status indicator and clip-in legend for easy identification. It weighs 0.301Kg and its dimensions are, 22.5mm wide, 133.8mm deep, 91.9mm high. It is the ideal solution for packaging, plastic molding, textile, and heating furnace applications. This relay conforms to international standards like EN/IEC 60068, IEC 61373, UL 508, CSA C22.2 No 14-13 and certifications like UL and CSA. Besides the existing standard screw connection for input and output, SSD provides more wiring options like the spring or screw pluggable input connectors, and telescopic or clamp cage output terminals.
Brand: Schneider Electric
Add to Quote CatalogueSpecifications
| Network Frequency | 47...440 Hz |
|---|---|
| Coordination Type |
|
| [Uc] Control Circuit Voltage | 4...32 V DC |
| Height | 91.9 mm |
| Connections - Terminals |
|
| Output Voltage | 48...600 V AC |
| Tightening Torque |
|
| Insulation Resistance | 1000 MOhm at 500 V DC |
| Maximum I²T For Fusing |
|
| Maximum Voltage Drop | <1.15 V on-state |
| Dielectric Strength |
|
| Response Time |
|
| Load Current | 0.15-35 A |
| Motor Power Kw |
|
| [Uimp] Rated Impulse Withstand Voltage |
|
| Net Weight | 0.301 kg |
| Minimum Switching Voltage | 4 V DC turn-on |
| Maximum Leakage Current | 1 mA off-state |
| Control Type | without test button |
| Device Presentation | complete product |
| Electromagnetic Compatibility |
|
| Absolute Maximum Voltage | 1200 V |
| Dv/Dt | 500 V/µs off-state at maximum rated voltage |
| Local Signalling | for control voltage LED (green) |
| Maximum Switching Voltage | 1 V DC turn-off |
| Solid State Output Type | zero voltage switching |
| Contact Form | Form 5 semiconductor output DOL contactor |
| Width | 22.5 mm |
| Input Current Limits | 10-15 mA |
| Overvoltage Category | III |
| Inrush Current | 1350 A at 60 Hz |
| Depth | 133.8 mm |
| Rated Duty | uninterrupted |
| Power Factor | 0.5 with maximum load |
| Country of Origin | United States |
| Width | 22.5 mm |
| Height | 91.9 mm |
| Weight | 0.301 kg |
| Range Of Product | Harmony Solid State Relays |
| Output Switching Mode | zero voltage switching |
| Product Or Component Type | modular DIN rail relay |
| Phase | 1 phase |
| Number Of Channels | 1 |
| Mounting Support | 35 mm symmetrical DIN rail conforming to IEC 60715 |
| Line Rated Current | 35 A |
| Product Configuration Type | contactor configuration with pluggable spring input |
| Device Short Name | SSD1 |
| Ambient Air Temperature For Operation | -40-80 °C |
| Standards |
|
| Pollution Degree | 2 |
| Vibration Resistance | 0.75 mm (f = 10-150 Hz) conforming to IEC 60068-2-6 |
| Shock Resistance |
|
| Ip Degree Of Protection | IP20 |
| Flame Retardance | V-0 conforming to UL 94 |
| Ambient Air Temperature For Storage | -40-100 °C |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
