SD315ON10B400 - motion control stepper motor drive - SD315 - pulse direction with oscillator

SD315ON10B400

motion control stepper motor drive - SD315 - pulse direction with oscillator

Add to Quote Catalogue

Specifications

Product Certifications	UL cUL
Standards	IEC 61800-3 environment 1 IEC 61800-3 IEC 50178 IEC 61800-5-1 EN/IEC 61800-3 environment 2
Pollution Degree	level 2
Electromagnetic Compatibility	electrostatic discharge level 3 IEC 61000-4-2 immunity to electrical transients level 4 IEC 61000-4-4 immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 voltage/current impulse level 3 IEC 61000-4-5
Marking	CE
Ambient Air Temperature For Operation	0-50 °C
Vibration Resistance	1 gn 13-150 Hz)IEC 60068-2-6 1.5 mm 3-13 Hz)IEC 60068-2-6
Ambient Air Temperature For Storage	-25-70 °C
Relative Humidity	5-85 % without condensation
Ip Degree Of Protection	IP20
Operating Altitude	<= 3280.84 ft (1000 m) without derating > 3280.84...< 6561.68 ft (> 1000...< 2000 m) without derating maximum ambient temperature 40°C, lateral distance of > 20 mm)
Warranty	18 months
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP111115EN
Sustainable Offer Status	Green Premium product
Pvc Free	Yes
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation	X
Circularity Profile	ENVEOLI111103EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
[Us] Rated Supply Voltage	24...48 V - 15...10 %
Height	117 mm
Maximum Switching Current	200 mA readiness signal output) 50 mA pulse/direction output signal) 20 mA output signal)
Physical Interface	RS422 - pulse/direction interface with oscillator
Maximum Motor Phase Current	10 A
Maximum Voltage Drop	<1 V 50 mA load readiness signal output <0.5 V pulse/direction output signal
Format Of The Drive	block
Shock Resistance	15 gn 11 ms IEC 60068-2-27
Supply Voltage Type	DC
Input Current	25 mA 5 V optocoupler input signals 7 mA 24 V optocoupler input signals
Current Consumption	<= 7.5 mA
Residual Ripple	< 5 % 24 V control voltage)
Phase	single phase
Net Weight	0.25 kg
Maximum Leakage Current	30 mA
Voltage State 0 Guaranteed	<= 5 V 24 V optocoupler input signals <= 0.4 V 5 V optocoupler input signals
Maximum Switching Voltage	30 V DC readiness signal output) 30 V pulse/direction output signal) 10 V DC output signal)
Communication Interface	pulse/direction, Integrated
Local Signalling	1 LED - ERR 1 LED - RUN
Voltage State 1 Guaranteed	15...30 V 24 V optocoupler input signals 2.5...5.25 V 5 V optocoupler input signals
Associated Fuse Rating	10 A
Maximum Input Frequency	200 kHz 24 V optocoupler input signals 200 kHz 5 V optocoupler input signals
Type Of Cooling	natural convection
Resistance	10 kOhm external potentiometer)
Analogue Input Type	voltage 0...10 V 10 bits 50 kOhm
Width	74.5 mm
Overvoltage Category	III
Depth	23.5 mm
Power Losses	<= 7 W
Input Voltage	< 30 V
Country of Origin	Germany
Width	74.5 mm
Height	117 mm
Weight	0.25 kg
Range Of Product	Lexium SD3
Product Or Component Type	motion stepper drive
Supply Voltage Limits	19-60 V
Device Short Name	SD315

motion control stepper motor drive - SD315 - pulse direction with oscillator

Specifications

Documents

Royal Wholesale Electric