RPF2BP7 - power relay, Harmony electromechanical relays, DIN rail or panel mount relay, 30A, 2CO, 230V AC

RPF2BP7

power relay, Harmony electromechanical relays, DIN rail or panel mount relay, 30A, 2CO, 230V AC

This Harmony RPF panel mounting power relay with fast-on terminals has a coil control voltage of 230V AC and has 2 normally open contacts with a rating of 30A. It helps to reduce the size of enclosures and increases machine reliability, you can mount nearly everywhere. Workability for hard-wired logic automated systems to complement the functions of industrial programmable logic controllers (PLCs). 0 0 0 0 0 0 0 0 0 0 0 0 0

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Product Certifications	UL CE CSA GOST
Standards	UL 508 CSA C22.2 No 14 IEC 61810-1
Pollution Degree	3
Ambient Air Temperature For Operation	-40-55 °C
Dielectric Strength	2000 V AC between poles with basic 4000 V AC between coil and contact with reinforced 1500 V AC between contacts with micro disconnection
Vibration Resistance	3 gn +/- 1 mm 10-150 Hz)5 cycles in operation 10 gn +/- 1 mm 10-150 Hz)5 cycles not operating
Shock Resistance	10 gnin operation 30 gnnot operating
Ip Degree Of Protection	IP40 conforming to IEC 60529
Ambient Air Temperature For Storage	-40-85 °C
Warranty	18 months
Rohs Exemption Information	Yes
Environmental Disclosure	ENVPEP130203EN
Sustainable Offer Status	Green Premium product
California Proposition 65	WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Circularity Profile	N/A
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Switching Capacity	7500 VA/700 W
Safety Reliability Data	B10d = 100000
Average Consumption	4 VA 60 Hz
Operating Rate	<= 1200 cycles/hour under load <= 18000 cycles/hour no-load
Protection Category	RT II
Test Levels	level A group mounting
Mounting Support	panel DIN rail
Electrical Durability	100000 cycles resistive
Reset Time	25 ms
Net Weight	0.082 kg
Cad Overall Height	68.5 mm
Maximum Switching Voltage	250 V IEC
Average Resistance	15600 Ohm at 20 °C +/- 15 %
Device Presentation	complete product
[Ie] Rated Operational Current	30 A 277 V AC) NO UL 20 A 28 V DC) NO UL 30 A 250 V AC) NO IEC 25 A 28 V DC) NO IEC 3 A 277 V AC) NC UL 3 A 28 V DC) NC UL 3 A 250 V AC) NC IEC 3 A 28 V DC) NC IEC
[Ui] Rated Insulation Voltage	250 V IEC 300 V UL
Mechanical Durability	5000000 cycles
Operating Position	any position
Control Circuit Voltage Limits	184...253 V
Operating Time	25 ms
Drop-Out Voltage Threshold	>= 0.15 Uc
[Uimp] Rated Impulse Withstand Voltage	4 kV 1.2/50 µs
Cad Overall Width	33.7 mm
Cad Overall Depth	39.2 mm
Minimum Switching Capacity	6000 mW 500 mA / 12 V NO 170 mW 10 mA / 6 V NC
Country of Origin	United States
Width	33.7 mm
Height	68.5 mm
Weight	0.082 kg
Utilisation Coefficient	10 %
[Uc] Control Circuit Voltage	230 V AC 50/60 Hz
Range Of Product	Harmony Electromechanical Relays
Contacts Material	silver tin oxide
Shape Of Pin	flat
Product Or Component Type	DIN rail/panel mount relay
Control Type	without lockable test button
Series Name	Power
Contacts Type And Composition	2 C/O
Load Current	25 A 28 V DC 30 A 250 V AC
Device Short Name	RPF
[Ithe] Conventional Enclosed Thermal Current	25 A -40-55 °C relays side by side without a gap 30 A -40-55 °C 13 mm gap between two relays

power relay, Harmony electromechanical relays, DIN rail or panel mount relay, 30A, 2CO, 230V AC

Specifications

Documents

Royal Wholesale Electric