Electrical distributor of high quality products to the LA and Orange County markets

Call Us Today To get a Quote
(714) 835-6211
sales@royalsantaana.com
Home > Schneider Electric > Interface and Control Relays > SE Relays > Harmony Analog > RMCN22BD – Isolated analog converter, Harmony Analog, 0…10V or 4…20mA to 0…10V or 4…20mA
RMCN22BD – Isolated analog converter, Harmony Analog, 0…10V or 4…20mA to 0…10V or 4…20mA
RMCN22BD
Isolated analog converter, Harmony Analog, 0…10V or 4...20mA to 0…10V or 4...20mA

This voltage/current converter is part of the range of Harmony Analog interfaces. This cost effective converter converts a 0 to 10 V signal to a 4 to 20mA signal or vice versa. Its supply voltage is 24V DC, non isolated. It also allows the connection distance between a sensor and the measurement acquisition device to be increased. Conforming to IEC standards, UL and CSA certified, this converter is suitable for universal use. 0 0 0 0 0 0 0 0 0 0 0

Brand: Schneider Electric

Add to Quote Catalogue
Specifications
Product Certifications
  • GL
  • CSA
  • UL
Standards
  • IEC 60584-1
  • IEC 60947-1
Ambient Air Temperature For Operation
  • 0-50 °C mounting side by side
  • 0-60 °C 2 cm spacing
Shock Resistance 50 gn 11 ms IEC 60068-2-27
Vibration Resistance 5 gn 10-100 Hz)IEC 60068-2-6
Ip Degree Of Protection
  • IP20 terminal block)
  • IP50 housing)
Disturbance Radiated/Conducted
  • CISPR 22 group 1 - class B
  • CISPR 11
Pollution Degree 2 IEC 60664-1
Ambient Air Temperature For Storage -40-85 °C
Resistance To Electrostatic Discharge
  • 6 kV in contact)IEC 61000-4-2 level 3
  • 8 kV in air)IEC 61000-4-2 level 3
Fire Resistance
  • 850 °C IEC 60695-2-1
  • 850 °C UL
Resistance To Fast Transients
  • 1 kV IEC 61000-4-4 on input-output)
  • 2 kV IEC 61000-4-4 on power supply)
Warranty 18 months
Rohs Exemption Information Yes
Mercury Free Yes
Environmental Disclosure ENVPEP1607005EN
Sustainable Offer Status Green Premium product
California Proposition 65 WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation X
Circularity Profile ENVEOLI1607005EN
Eu Rohs Directive Pro-active compliance (Product out of EU RoHS legal scope)
Current Consumption
  • <= 40 mA voltage output
  • <= 60 mA current output
Safety Reliability Data
  • MTTFd = 73.2 years
  • B10d = 67582
Measurement Error +/- 5 % of full scale20 °C temporary performance degradation when subject to electromagnetic interference)
Clamping Connection Capacity
  • 1 x 2.5 mm²
  • 2 x 1.5 mm²
[Ui] Rated Insulation Voltage 2 kV
Marking CE
Analogue Output Voltage -15...0 V no input or input wire broken
Net Weight 0.12 kg
Fixing Mode
  • by screws (mounting plate)
  • clip-on (35 mm symmetrical DIN rail)
Surge Withstand 0.5 kV 1.2/50 µs IEC 61000-4-5
Local Signalling for power ON LED (green)
Temperature Coefficient 200 ppm/°C
Protection Type
  • short-circuit protection on output
  • overvoltage protection on output (+/- 30 V)
  • reverse polarity protection on output
Tightening Torque 0.6-1.1 N.m
Analogue Output Current 4-30 mA no input or input wire broken
Repeat Accuracy
  • +/- 0.2 % full scale 20 °C
  • +/- 0.6 % full scale 60 °C
[Us] Rated Supply Voltage 24 V DC +/- 20 %, non isolated
Country of Origin United States
Weight 0.12 kg
Range Of Product Harmony Analog
Analogue Output Type
  • current 4...20 mA <= 500 Ohm by cabling
  • voltage 0...10 V >= 100 kOhm by cabling
Product Or Component Type voltage/current converter
Analogue Input Type
  • current 4...20 mA
  • voltage 0...10 V DC
Documents
Royal Wholesale Electric

5.0

Powered by

Based on 2 User Reviews

© ROYAL WHOLESALE ELECTRIC - All Rights Reserved 2020