RM35JA32MW - current control relay, Harmony Control Relays, 5A, 2CO, overcurrent or undercurrent detection, 0.15â€¦15A, 24â€¦240V AC DC

RM35JA32MW

current control relay, Harmony Control Relays, 5A, 2CO, overcurrent or undercurrent detection, 0.15â€¦15A, 24â€¦240V AC DC

This Harmony RM35-JA relay allows monitoring of current control in single phase networks. This modular multi function single phase current control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a sealable cover, simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Product Certifications	GL UL GOST C-tick CSA
Standards	IEC 60255-6
Immunity To Microbreaks	50 ms
Non-Dissipating Shock Wave	4 kV IEC 60255-5 4 kV IEC 60664-1 4 kV IEC 61000-4-5
Dielectric Test Voltage	2 kV AC 50 Hz, 1 min IEC 60255-5 2 kV AC 50 Hz, 1 min IEC 60664-1
Electromagnetic Compatibility	emission standard for industrial environments conforming to IEC 61000-6-4 emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 immunity for industrial environments conforming to NF EN/IEC 61000-6-2
Shock Resistance	15 gn 11 ms IEC 60255-21-1
Ambient Air Temperature For Operation	-20-50 °C
Vibration Resistance	0.35 mm 5-57.6 Hz)IEC 60068-2-6 1 gn 57.6-150 Hz)IEC 60255-21-1
Ip Degree Of Protection	IP20 IEC 60529 terminals) IP30 IEC 60529 casing)
Pollution Degree	3 IEC 60664-1
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	95-95 % 55-55 °C IEC 60068-2-30
Warranty	18 months
Mercury Free	Yes
Environmental Disclosure	ENVPEP1504008EN
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Circularity Profile	ENVEOLI1504008EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Polarity	no DC
Safety Reliability Data	MTTFd = 296.8 years B10d = 270000
Maximum Measuring Cycle	30 ms measurement cycle as true rms value
Control Circuit Voltage Limits	- 15 % + 10 % Un
Hysteresis	5-50 % threshold setting
Insulation Resistance	> 500 MOhm 500 V DC between supply and relay output IEC 60255-5 > 500 MOhm 500 V DC between measurement and relay output IEC 60664-1 > 1 MOhm 500 V DC between supply and measurement IEC 60255-5 > 500 MOhm 500 V DC between supply and relay output IEC 60664-1 > 500 MOhm 500 V DC between measurement and relay output IEC 60255-5 > 1 MOhm 500 V DC between supply and measurement IEC 60664-1
Measurement Error	0.05 %/°C with temperature variation 1 by volt over the whole range with voltage variation
Operating Rate	<= 360 operations/hour full load
Output Contacts	2 C/O
Contacts Material	cadmium free
Marking	CE : EMC 89/336/EEC CE : 73/23/EEC
Operating Position	any position without derating
Net Weight	0.13 kg
Threshold Setting	10...100 %
Maximum Switching Voltage	250 V AC/DC
Control Type	without test button
Reset Time	1500 ms time delay
Connections - Terminals	screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
[Us] Rated Supply Voltage	24...240 V AC/DC 50/60 Hz, non self-powered
[Ui] Rated Insulation Voltage	250 V IEC 60664-1
Overvoltage Category	III IEC 60664-1
Supply Voltage Limits	20.4-264 V AC/DC
Mounting Support	35 mm symmetrical DIN rail conforming to IEC 60715
Nominal Output Current	5 A
Local Signalling	for power ON LED (green) for relay ON LED (yellow)
Mechanical Durability	30000000 cycles
Housing Material	self-extinguishing plastic
Resistance Across Terminals	0.005 Ohm E3-M terminals 0.015 Ohm E2-M terminals 0.05 Ohm E1-M terminals
Control Circuit Frequency	40...70 Hz +/- 10 %
Measurement Accuracy	+/- 10 % of the full scale value
Width	35 mm
Tightening Torque	0.6-1 N.m IEC 60947-1
Maximum Power Consumption In W	0.6 W DC
Electrical Durability	100000 cycles
Run-Up Delay At Power-Up	0.3 s
Repeat Accuracy	+/- 0.5 % input and measurement circuit +/- 2 % time delay
Country of Origin	Canada
Width	35 mm
Weight	0.13 kg
Minimum Switching Current	10 mA 5 V DC
Maximum Switching Current	5 A AC/DC
Range Of Product	Harmony Control Relays
Measurement Range	150 mA...15 A current AC/DC
Switching Capacity In Va	1250 VA
Product Or Component Type	current control relay
Utilisation Category	AC-12 IEC 60947-5-1 AC-13 IEC 60947-5-1 AC-14 IEC 60947-5-1 AC-15 IEC 60947-5-1 DC-12 IEC 60947-5-1 DC-13 IEC 60947-5-1 DC-14 IEC 60947-5-1
Relay Name	RM35JA
Contacts Type And Composition	2 C/O
Relay Type	current control relay
Time Delay Type	adjustable 0.3...30 s, 0 + 10 % Tt- time delay upon fault adjustable 1...20 s, 0 + 10 % Ti- inhibition time delay upon startup
Relay Monitored Parameters	overcurrent or undercurrent detection
Maximum Power Consumption In Va	3.5 VA AC

current control relay, Harmony Control Relays, 5A, 2CO, overcurrent or undercurrent detection, 0.15â€¦15A, 24â€¦240V AC DC

Specifications

Documents

Royal Wholesale Electric