RM35BA10 - pump control relay, Harmony Control Relays, 5A, 1CO, 208...480V AC

RM35BA10

pump control relay, Harmony Control Relays, 5A, 1CO, 208...480V AC

This Harmony RM35-BA control relay allows monitoring of pump control. This modular pump control relay is ideal for monitoring of electrical values in industrial and building control panels. It applies to a wide type of industrial automation applications such as hoisting, packaging, lifts, textile, water. It has one of market medium form-factors with 35mm width, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 3-pole DIN device. It also offers a selectable memory function, integral LED for indicating control status, sealable cover, with simple and precise settings with screw trimmers. It provides automatic shutdown management and fault information to user for a quick fault identification and troubleshooting. Multi function controller for wide choice selected in hard-wired logic automated systems, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Product Certifications	C-tick CSA GOST UL GL
Ambient Air Temperature For Operation	-20-50 °C
Standards	IEC 60255-6
Immunity To Microbreaks	500 ms
Electromagnetic Compatibility	emission standard for industrial environments IEC 61000-6-4 emission standard for residential, commercial and light-industrial environments IEC 61000-6-3 immunity for industrial environments NF EN/IEC 61000-6-2
Shock Resistance	15 gn 11 ms IEC 60255-21-1
Vibration Resistance	0.35 mm 5-57.6 Hz)IEC 60068-2-6/IEC 60255-21-1 1 gn 57.6-150 Hz)IEC 60068-2-6/IEC 60255-21-1
Ip Degree Of Protection	IP20 IEC 60529 terminals) IP30 IEC 60529 casing)
Pollution Degree	3 IEC 60664-1
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	95-95 % 55-55 °C IEC 60068-2-30
Dielectric Strength	2 kV AC 50 Hz shock wave 4 kV)
Warranty	18 months
Mercury Free	Yes
Environmental Disclosure	ENVPEP1601004EN
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Circularity Profile	ENVEOLI1601004EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Maximum Measuring Cycle	140 ms as true rms value
Hysteresis	5-5 % threshold
Insulation Resistance	> 500 MOhm 500 V DC between supply and relay output 60255-5 > 500 MOhm 500 V DC between measurement and relay output 60664-1 > 1 MOhm 500 V DC between supply and measurement 60255-5 > 500 MOhm 500 V DC between supply and relay output 60664-1 > 500 MOhm 500 V DC between measurement and relay output 60255-5 > 1 MOhm 500 V DC between supply and measurement 60664-1
Operating Rate	<= 360 operations/hour full load
Status Led	1 LED Green power ON 1 LED Yellow fault 1 LED Yellow relay ON
Output Contacts	1 C/O
Reset Time	2000 ms
Marking	CE : EMC 89/336/EEC CE : 73/23/EEC
Response Time	< 300 ms (in the event of a fault)
Input Current	11 A permanent at 25 °C E1-L2 terminals 50 A non repetitive < 1 s at 25 °C E1-L2 terminals
Maximum Switching Voltage	250 V AC/DC
Control Type	without test button
Connections - Terminals	screw terminals, 1 x 0.5...1 x 4 mm² AWG 20...AWG 11) solid without cable end screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 12) flexible with cable end screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
[Us] Rated Supply Voltage	208...480 V AC 50/60 Hz, non self-powered 230 V AC 50/60 Hz, non self-powered
[Ui] Rated Insulation Voltage	400 V IEC 60664-1
Overvoltage Category	III IEC 60664-1
Supply Voltage Limits	183-528 V AC
Mounting Support	35 mm symmetrical DIN rail conforming to IEC 60715
Nominal Output Current	5 A
Mechanical Durability	30000000 cycles
Housing Material	self-extinguishing plastic
Resistance Across Terminals	0.01 Ohm E1-L2 terminals
Operating Position	any position
Control Circuit Voltage Limits	- 15 % + 10 % Un
Measurement Accuracy	+/- 10 % of the full scale value
Measurement Error	1 % by volt over the whole range +/- 0.05 %/°C
Width	35 mm
Tightening Torque	0.6-1 N.m IEC 60947-1
Electrical Durability	100000 cycles
Run-Up Delay At Power-Up	0.5 s
Supply Frequency	50/60 Hz +/- 10 %
Repeat Accuracy	+/- 1 % input and measurement circuit +/- 1 % time delay
Country of Origin	United States
Width	35 mm
Minimum Switching Current	10 mA 5 V DC
Maximum Switching Current	5 A AC/DC
Range Of Product	Harmony Control Relays
Measurement Range	208...480 V AC 1...10 A
Switching Capacity In Va	1250 VA
Product Or Component Type	pump control relay
Utilisation Category	AC-12 IEC 60947-5-1 AC-13 IEC 60947-5-1 AC-14 IEC 60947-5-1 AC-15 IEC 60947-5-1 DC-12 IEC 60947-5-1 DC-13 IEC 60947-5-1
Relay Name	RM35BA
Relay Type	pump control relays
Product Specific Application	for 3-phase and single-phase pump
Time Delay Type	adjustable 1...60 s, +/- 10 % Ti- inhibition time delay upon startup adjustable 0.1...10 s, +/- 10 % Tt- time delay upon fault
Relay Monitored Parameters	overcurrent and undercurrent control phase sequence on 3-phase supply phase failure on 3-phase supply
Maximum Power Consumption In Va	5 VA AC

pump control relay, Harmony Control Relays, 5A, 1CO, 208...480V AC

Specifications

Documents

Royal Wholesale Electric