RE17RAMU - Harmony, Modular timing relay, 8 A, 1 CO, 1 s..100 h, on delay, 24 V DC / 24...240 V AC/DC

RE17RAMU

Harmony, Modular timing relay, 8 A, 1 CO, 1 s..100 h, on delay, 24 V DC / 24...240 V AC/DC

This Harmony RE17R timing relay can be set between 0.1 seconds and 100 hours, has an output rating of 8A, is 17.5mm wide and can be supplied with 24 V DC, 24 to 240 V AC. It also has 1 changeover contact SPDT (single pole double throw). It has one of market slimmest form-factors, allowing for a flexible and easy installation on DIN rail, using the same space as any modular 1-pole DIN device. It also offers a sealable cover, simple and precise settings with rotary trimmers. This timer offers pause and summation control signals. Single function timer for a simple integration in hard-wired logic schematics, ideal for refurbishment of old installations without using a PLC. 0 0 0 0 0 0 0 0 0 0 0 0 0

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Discrete Output Type	relay
Range Of Product	Harmony Timer Relays
Product Or Component Type	dual function relay
Time Delay Range	1...10 min 10...100 h 0.1...1 s 6...60 s 6...60 min 1...10 s 1...10 h
Nominal Output Current	8 A
Width	17.5 mm
Time Delay Type	power on-delay
Device Short Name	RE17R
Safety Reliability Data	B10d = 270000 MTTFd = 296.8 years
Setting Accuracy Of Time Delay	+/- 10 % of full scale 25 °C IEC 61812-1
Height	90 mm
Creepage Distance	4 kV/3 IEC 60664-1
Maximum Delay Response	100 ms
Control Type	selector switch front panel
Insulation Resistance	100 MOhm 500 V DC IEC 60664-1
Maximum Power Consumption In W	0.6 W 24 V DC
Maximum Switching Current	8 A AC/DC
Contacts Material	cadmium free
Power Consumption In Va	0-32 VA 240 V AC
Dielectric Strength	2.5 kV 1 mA/1 minute 50 Hz IEC 61812-1
Marking	CE
Voltage Range	0.85...1.1 Us
Reset Time	120 ms on de-energisation typical
Operating Rate In Hz	10 Hz
Net Weight	0.07 kg
Mounting Position	any position in relation to normal vertical mounting plane
Voltage Drift	+/- 0.2 %/V
Maximum Switching Voltage	250 V AC
Connections - Terminals	screw terminals, 1 x 0.5...1 x 3.3 mm² AWG 20...AWG 12) solid without cable end screw terminals, 2 x 0.5...2 x 2.5 mm² AWG 20...AWG 14) solid without cable end screw terminals, 1 x 0.2...1 x 2.5 mm² AWG 24...AWG 14) flexible with cable end screw terminals, 2 x 0.2...2 x 1.5 mm² AWG 24...AWG 16) flexible with cable end
Functionality	on-delay timing
Contacts Type And Composition	1 C/O
[Us] Rated Supply Voltage	24...240 V AC 50/60 Hz 24 V DC
Temperature Drift	+/- 0.05 %/°C
Local Signalling	LED indicator on steady: relay energised, no timing in progress LED indicator 80 % ON and 20 % OFF flashing: timing in progress LED indicator 5 % ON and 95 % OFF pulsing: relay de-energised, no timing in progress (except function Di-D, Li-L)
Minimum Switching Current	10 mA 5 V DC
Input Voltage	10 V
Mounting Support	35 mm DIN rail conforming to EN/IEC 60715
Electrical Durability	100000 cycles resistive 8 A 250 V AC
Mechanical Durability	10000000 cycles
Compatibility Code	RE17
Breaking Capacity	2000 VA
On-Load Factor	100 %
Housing Material	self-extinguishing
Impulse Duration	100 ms with load in parallel typical 30 ms typical
Time Delay Type	A, At
[Uimp] Rated Impulse Withstand Voltage	5 kV 1.2/50 µs
Depth	72 mm
Tightening Torque	0.6-1 N.m IEC 60947-1
Supply Frequency	50...60 Hz +/- 5 %
Repeat Accuracy	+/- 0.5 % IEC 61812-1
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP121117EN
Sustainable Offer Status	Green Premium product
Reach Regulation	Reference contains Substances of Very High Concern above the threshold
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Circularity Profile	ENVEOLI121113EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications	CSA cULus GL
Ambient Air Temperature For Operation	-20-60 °C
Standards	2006/95/EC 2004/108/EC IEC 61812-1 EN 61000-6-3 EN 61000-6-1 EN 61000-6-4 EN 61000-6-2
Immunity To Microbreaks	20 ms
Electromagnetic Compatibility	electrostatic discharge immunity test 6 kV in contact) level 3 IEC 61000-4-2 electrostatic discharge immunity test 8 kV in air) level 3 IEC 61000-4-2 susceptibility to electromagnetic fields 10 V/m 80 MHz to 1 GHz) level 3 IEC 61000-4-3 electrical fast transient/burst immunity test 1 kV capacitive connecting clip) level 3 IEC 61000-4-4 electrical fast transient/burst immunity test 2 kV direct) level 3 IEC 61000-4-4 1.2/50 µs shock waves immunity test 1 kV differential mode) level 3 IEC 61000-4-5 1.2/50 µs shock waves immunity test 2 kV common mode) level 3 IEC 61000-4-5 conducted RF disturbances 10 V 0.15...80 MHz) level 3 IEC 61000-4-6 voltage dips and interruptions immunity test 0 % 1 cycle) IEC 61000-4-11 voltage dips and interruptions immunity test 70 % 25/30 cycles) IEC 61000-4-11 conducted and radiated emissionsclass B EN 55022
Shock Resistance	15 gn 11 ms IEC 60068-2-27
Vibration Resistance	20 m/s² 10-150 Hz)IEC 60068-2-6
Ip Degree Of Protection	IP20 IEC 60529 terminal block) IP40 IEC 60529 housing) IP50 IEC 60529 front panel)
Ambient Air Temperature For Storage	-30-60 °C
Relative Humidity	93-93 % without condensation IEC 60068-2-30

Harmony, Modular timing relay, 8 A, 1 CO, 1 s..100 h, on delay, 24 V DC / 24...240 V AC/DC

Specifications

Documents

Royal Wholesale Electric