LC1G400LSEN - Contactor, high power, TeSys Giga, 3P(3NO), AC-3,

LC1G400LSEN

Contactor, high power, TeSys Giga, 3P(3NO), AC-3, <=440V 400A, standard version, 200-500V AC/DC wide band coil

Add to Quote Catalogue

Specifications

Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP2105013
Sustainable Offer Status	Green Premium product
California Proposition 65	WARNING: This product can expose you to chemicals including: Styrene, which is known to the State of California to cause cancer, and Bisphenol A (BPA), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
China Rohs Regulation	X
Circularity Profile	ENVEOLI2105013
Eu Rohs Directive	Compliant with Exemptions
Product Certifications	CB Scheme CCC cULus EAC CE UKCA EU-RO-MR by DNV-GL
Height	225 mm
Power Dissipation Per Pole	30 W AC-1 - Ith 550 A 16 W AC-3 - Ith 400 A
Average Impedance	0.0001 Ohm
Auxiliary Contact Composition	1 NO + 1 NC
Connection Pitch	45 mm
[Ith] Conventional Free Air Thermal Current	550 A (at 40 °C)
Mounting Support	plate
Standards	EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1 JIS C8201-5-1 IEC 60335-1:Clause 30.2 IEC 60335-2-40:Annex JJ UL 60335-1 UL 60335-2-40:Annex JJ
Safety Reliability Level	B10d = 400000 cycles contactor with nominal load EN/ISO 13849-1 B10d = 3000000 cycles contactor with mechanical load EN/ISO 13849-1
Hold-In Power Consumption In W	8.6-8.6 W
Rated Breaking Capacity	3480 A at 440 V
Irms Rated Making Capacity	5090 A at 440 V
Associated Fuse Rating	500 A aM at <= 440 V for motor 315 A aM at <= 690 V for motor 630 A gG at <= 690 V
Net Weight	7.5 kg
[Uimp] Rated Impulse Withstand Voltage	8 kV
Inrush Power In Va	535-535 VA
Pole Contact Composition	3 NO
Connections - Terminals	power circuit: bar 2 - busbar cross section: 32 x 10 mm power circuit: lugs-ring terminals 1 185-185 mm² power circuit: bolted connection control circuit: push-in 1 0.2-2.5 mm² - cable stiffness: solid stranded without cable end control circuit: push-in 1 0.25-2.5 mm² - cable stiffness: flexible with cable end control circuit: push-in 2 0.5-1.0 mm² with cable end control circuit: push-in 0.75-2.5 mm² - cable stiffness: solid stranded without cable end control circuit: push-in 0.75-2.5 mm² - cable stiffness: flexible with cable end
Coil Technology	built-in bidirectional peak limiting
Operating Time	40...70 ms closing 15...50 ms opening
Maximum Operating Rate	600 cyc/h AC-3 600 cyc/h AC-3e 300 cyc/h AC-1 150 cyc/h AC-4
Mechanical Durability	8 Mcycles
Tightening Torque	35 N.m
Compatibility Code	LC1G
Hold-In Power Consumption In Va	15.4-15.4 VA
Width	140 mm
Overvoltage Category	III
Depth	226 mm
Motor Power Kw	110 kW at 230 V AC 50/60 Hz (AC-3e) 200 kW at 400 V AC 50/60 Hz (AC-3e) 200 kW at 415 V AC 50/60 Hz (AC-3e) 250 kW at 440 V AC 50/60 Hz (AC-3e) 250 kW at 500 V AC 50/60 Hz (AC-3e) 315 kW at 690 V AC 50/60 Hz (AC-3e) 220 kW at 1000 V AC 50/60 Hz (AC-3e) 110 kW at 230 V AC 50/60 Hz (AC-3) 200 kW at 400 V AC 50/60 Hz (AC-3) 200 kW at 415 V AC 50/60 Hz (AC-3) 250 kW at 440 V AC 50/60 Hz (AC-3) 250 kW at 500 V AC 50/60 Hz (AC-3) 315 kW at 690 V AC 50/60 Hz (AC-3) 220 kW at 1000 V AC 50/60 Hz (AC-3) 110 kW at 230 V AC 50/60 Hz (AC-4) 200 kW at 400 V AC 50/60 Hz (AC-4) 200 kW at 415 V AC 50/60 Hz (AC-4) 220 kW at 440 V AC 50/60 Hz (AC-4) 250 kW at 500 V AC 50/60 Hz (AC-4) 315 kW at 690 V AC 50/60 Hz (AC-4) 220 kW at 1000 V AC 50/60 Hz (AC-4)
Maximum Horse Power Rating	125 hp at 200/208 V 60 Hz 150 hp at 230/240 V 60 Hz 300 hp at 460/480 V 60 Hz 400 hp at 575/600 V 60 Hz
[Ui] Rated Insulation Voltage	1000 V
Inrush Power In W	300 W
[Icw] Rated Short-Time Withstand Current	3.6 kA - 10 s 2.4 kA - 30 s 1.7 kA - 1 min 1.2 kA - 3 min 1.0 kA - 10 min
Country of Origin	China
Width	140 mm
Height	225 mm
Weight	7.5 kg
[Uc] Control Circuit Voltage	200...500 V AC 50/60 Hz 200...500 V DC
[Ue] Rated Operational Voltage	<= 1000 V AC 50/60 Hz <= 460 V DC
Range Of Product	TeSys Giga
Control Circuit Voltage Limits	operational: 0.8 Uc Min...1.1 Uc Max (at <60 °C) drop-out: 0.1 Uc Max...0.45 Uc Min (at <60 °C)
Contactor Application	power switching motor control
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-1 AC-3 AC-3e AC-4 AC-5a AC-5b AC-6a AC-6b AC-8a AC-8b DC-1 DC-3 DC-5
[Ie] Rated Operational Current	550 A (at <40 °C) at <= 1000 V AC-1 400 A (at <60 °C) at <= 440 V AC-3
Poles Description	3P
Device Short Name	LC1G
Ambient Air Temperature For Operation	-25-60 °C
Ambient Air Temperature For Storage	-60-80 °C
Protective Treatment	TH
Ip Degree Of Protection	IP2X front face with shrouds IEC 60529 IP2X front face with shrouds VDE 0106
Mechanical Robustness	vibrations 5-300 Hz 2 gn contactor open vibrations 5-300 Hz 4 gn contactor closed shocks 10 gn 11 ms contactor open shocks 15 gn 11 ms contactor closed
Color	dark grey
Permissible Ambient Air Temperature Around The Device	-40-70 °C at Uc

Contactor, high power, TeSys Giga, 3P(3NO), AC-3, <=440V 400A, standard version, 200-500V AC/DC wide band coil

Specifications

Documents

Royal Wholesale Electric