LC1D65B7 - IEC contactor, TeSys D, nonreversing, 65A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 24VAC 50/60Hz coil, open

LC1D65B7

IEC contactor, TeSys D, nonreversing, 65A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 24VAC 50/60Hz coil, open

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 125A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.90 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Product Certifications	UL CCC BV GL GOST RINA LROS (Lloyds register of shipping) DNV UKCA
Height	122 mm
Standards	UL 508 EN 60947-5-1 EN 60947-4-1 IEC 60947-5-1 CSA C22.2 No 14
Climatic Withstand	IACS E10 exposure to damp heat
Net Weight	2.185 kg
Flame Retardance	V1 conforming to UL 94
Protective Treatment	TH 3)IEC 60068-2-30
Ip Degree Of Protection	IP2X VDE 0106 IP2X IEC 60529
Mechanical Robustness	shocks contactor closed 15 Gn for 11 ms) vibrations contactor opened 2 Gn, 5...300 Hz) vibrations contactor closed 4 Gn, 5...300 Hz) shocks contactor opened 10 Gn for 11 ms)
Operating Altitude	0...9842.52 ft (0...3000 m)
Quantity Per Set	set of 10
Fire Resistance	850 °C IEC 60695-2-1
Width	70 mm
Depth	118 mm
Warranty	18 months
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP110205EN
Sustainable Offer Status	Green Premium product
Pvc Free	Yes
Toxic Heavy Metal Free	Yes
California Proposition 65	WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile	N/A
Eu Rohs Directive	Compliant
Non-Overlap Time	1.5 ms on energisation between NC and NO contacts 1.5 ms on de-energisation between NC and NO contacts
Minimum Switching Current	5 mA for control circuit
Power Dissipation Per Pole	6.4 W AC-1 4.2 W AC-3e 6.3 W AC-3 9.6 W AC-1
Average Impedance	1.5 Ohm - Ith 80 A 50 Hz for power circuit
Auxiliary Contact Composition	1 NO + 1 NC
[Ith] Conventional Free Air Thermal Current	80 A (at 60 °C) for power circuit 10 A (at 60 °C) for control circuit
Control Circuit Voltage Limits	0.8...1.1 Uc -40-60 °C operational AC 50 Hz 0.85...1.1 Uc -40-60 °C operational AC 60 Hz 1...1.1 Uc 60-70 °C operational AC 50/60 Hz 0.3...0.6 Uc -40-70 °C drop-out AC 50/60 Hz
Mounting Support	rail
Control Circuit Type	AC 50/60 Hz
Safety Reliability Level	B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Insulation Resistance	> 10 MOhm for control circuit
Rated Breaking Capacity	1000 kA at 440 V for power circuit conforming to IEC 60947
Irms Rated Making Capacity	140 A at 440 V AC for control circuit conforming to IEC 60947-5-1 140 A AC for control circuit conforming to IEC 60947-5-1 1000 A at 440 V for power circuit conforming to IEC 60947
Associated Fuse Rating	125 A gG at <= 690 V coordination type 2 for power circuit 160 A gG at <= 690 V coordination type 1 for power circuit conforming to IEC 60947-5-1 125 A gG at <= 690 V coordination type 1 for power circuit 10 A gG for control circuit conforming to IEC 60947-5-1
Inrush Power In Va	160-160 VA cos phi 0.75 (at 20 °C) 140-140 VA cos phi 0.75 (at 20 °C)
[Uimp] Rated Impulse Withstand Voltage	6 kV IEC 60947
Pole Contact Composition	3 NO
Connections - Terminals	control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid without cable end control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: rigid power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: rigid without cable end power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible without cable end power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: flexible without cable end power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible with cable end power circuit: screw terminals 2 2.5-10 mm² - cable stiffness: flexible with cable end control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: rigid
Coil Technology	without built-in
Operating Time	12...26 ms closing 4...19 ms opening
Minimum Switching Voltage	17 V for control circuit
Maximum Operating Rate	3600 cyc/mn 60 °C
Tightening Torque	control circuit 1.7 N.m screw clamp terminal Philips No 2 power circuit 5 N.m screw terminal flat Ø 6 to Ø 8 mm control circuit 1.7 N.m screw clamp terminal pozidriv No 2 control circuit 1.7 N.m screw clamp terminal flat Ø 6 mm
Mechanical Durability	6000000 cycles
Auxiliary Contacts Type	mirror contact 1 NC IEC 60947-4-1 mechanically linked 1 NO + 1 NC IEC 60947-5-1
Compatibility Code	LC1D
Hold-In Power Consumption In Va	15-15 VA 50 Hz cos phi 0.3 (at 20 °C) 13-13 VA 60 Hz cos phi 0.3 (at 20 °C)
Overvoltage Category	III
Maximum Horse Power Rating	10 hp at 230/240 V AC 60 Hz for 1 phase motors 20 hp at 200/208 V AC 60 Hz for 3 phase motors 20 hp at 230/240 V AC 60 Hz for 3 phase motors 40 hp at 460/480 V AC 60 Hz for 3 phase motors 50 hp at 575/600 V AC 60 Hz for 3 phase motors 5 hp at 115 V AC 60 Hz for 1 phase motors
Motor Power Kw	11 kW at 400 V AC 50 Hz (AC-4) 30 kW at 380...400 V AC 50 Hz (AC-3) 37 kW at 500 V AC 50 Hz (AC-3) 37 kW at 660...690 V AC 50 Hz (AC-3) 18.5 kW at 220...230 V AC 50 Hz (AC-3) 30 kW at 415 V AC 50 Hz (AC-3) 37 kW at 1000 V AC 50 Hz (AC-3) 30 kW at 440 V AC 50 Hz (AC-3e) 30 kW at 380...400 V AC 50 Hz (AC-3e) 37 kW at 500 V AC 50 Hz (AC-3e) 37 kW at 660...690 V AC 50 Hz (AC-3e) 18.5 kW at 220...230 V AC 50 Hz (AC-3e) 30 kW at 415 V AC 50 Hz (AC-3e) 37 kW at 1000 V AC 50 Hz (AC-3e) 37 kW at 500 V AC 50 Hz 30 kW at 380...400 V AC 50 Hz
[Ui] Rated Insulation Voltage	control circuit 600 V UL power circuit 600 V CSA power circuit 600 V UL IEC 60947-1 control circuit 690 V IEC 60947-1 power circuit 690 V CSA IEC 60947-1 control circuit 600 V CSA
[Icw] Rated Short-Time Withstand Current	520 A 40 °C - 10 s for power circuit 900 A 40 °C - 1 s for power circuit
Heat Dissipation	4-5 W at 50/60 Hz for control circuit
Protective Cover	with
Country of Origin	Czechia
Width	70 mm
Height	122 mm
Weight	2.185 kg
[Uc] Control Circuit Voltage	24 V AC 50/60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	resistive load motor control
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-4 AC-1 AC-2 AC-3e
[Ie] Rated Operational Current	65 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 65 A (at <60 °C) at <= 440 V AC AC-3e for power circuit 65 A (at <60 °C) at 24 V AC AC-3 for power circuit 80 A (at <60 °C) at 24 V AC AC-1 for power circuit
Poles Description	3P
Device Short Name	LC1D

IEC contactor, TeSys D, nonreversing, 65A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 24VAC 50/60Hz coil, open

Specifications

Documents

Royal Wholesale Electric