LC1D50T6 - IEC contactor, TeSys D, nonreversing, 50A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 480VAC 60Hz coil, open

LC1D50T6

IEC contactor, TeSys D, nonreversing, 50A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 480VAC 60Hz coil, open

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 50A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 15HP at 200 to 208VAC, 15HP at 240VAC, 40HP at 480VAC and 40HP at 600VAC three phase. Contactor is also rated for 3HP at 115VAC and 7.5HP at 240VAC single phase. When used with a 480VAC up to 110A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 110A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 480 VAC60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 1.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Product Certifications	RINA CCC CSA GL GOST BV DNV UL LROS (pending) UKCA
Height	122 mm
Standards	EN 60947-4-1 CSA C22.2 No 14 IEC 60947-5-1 EN 60947-5-1 UL 508 IEC 60947-4-1
Climatic Withstand	IACS E10 exposure to damp heat
Net Weight	1.4 kg
Flame Retardance	V1 conforming to UL 94
Ip Degree Of Protection	IP2X IEC 60529 IP2X VDE 0106
Mechanical Robustness	shocks contactor opened 10 Gn for 11 ms) shocks contactor closed 15 Gn for 11 ms) vibrations contactor opened 2 Gn, 5...300 Hz) vibrations contactor closed 4 Gn, 5...300 Hz)
Operating Altitude	9842.52 ft (3000 m) without derating
Fire Resistance	850 °C IEC 60695-2-1
Width	55 mm
Depth	119 mm
Permissible Ambient Air Temperature Around The Device	-5-60 °C -40-70 °C at Uc
Warranty	18 months
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP110205EN
Sustainable Offer Status	Green Premium product
Pvc Free	Yes
Toxic Heavy Metal Free	Yes
California Proposition 65	WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile	N/A
Eu Rohs Directive	Compliant
Non-Overlap Time	1.5 ms on de-energisation between NC and NO contacts 1.5 ms on energisation between NC and NO contacts
Minimum Switching Current	5 mA for control circuit
Power Dissipation Per Pole	3.7 W AC-3 9.6 W AC-1 3.7 W AC-3e
Average Impedance	1.5 mOhm - Ith 80 A 50 Hz for power circuit
Auxiliary Contact Composition	1 NO + 1 NC
[Ith] Conventional Free Air Thermal Current	10 A (at 60 °C) for control circuit 80 A (at 60 °C) for power circuit
Control Circuit Voltage Limits	0.85...1.1 Uc 60-60 °C operational AC 60 Hz 0.3...0.6 Uc 60-60 °C drop-out AC 60 Hz
Mounting Support	rail plate
Control Circuit Type	AC 60 Hz
Safety Reliability Level	B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Insulation Resistance	> 10 MOhm for control circuit
Rated Breaking Capacity	900 A at 440 V for power circuit conforming to IEC 60947
Irms Rated Making Capacity	140 A AC for control circuit conforming to IEC 60947-5-1 900 A at 440 V for power circuit conforming to IEC 60947
Associated Fuse Rating	10 A gG for control circuit conforming to IEC 60947-5-1 100 A gG at <= 690 V coordination type 1 for power circuit 100 A gG at <= 690 V coordination type 2 for power circuit
Inrush Power In Va	140-140 VA cos phi 0.75 (at 20 °C) 160-160 VA cos phi 0.75 (at 20 °C)
[Uimp] Rated Impulse Withstand Voltage	6 kV IEC 60947
Pole Contact Composition	3 NO
Connections - Terminals	control circuit: screw clamp terminal 1 1-4 mm² - cable stiffness: solid without cable end control circuit: screw clamp terminal 2 1-4 mm² - cable stiffness: solid without cable end control circuit: screw clamp terminal 1 1-2.5 mm² - cable stiffness: flexible without cable end control circuit: screw clamp terminal 2 1-2.5 mm² - cable stiffness: flexible without cable end control circuit: screw clamp terminal 1 1-4 mm² - cable stiffness: flexible with cable end control circuit: screw clamp terminal 2 1-4 mm² - cable stiffness: flexible with cable end power circuit: connector 1 2.5-35 mm² - cable stiffness: solid with cable end power circuit: connector 2 2.5-35 mm² - cable stiffness: solid with cable end power circuit: connector 1 2.5-35 mm² - cable stiffness: flexible without cable end power circuit: connector 2 2.5-25 mm² - cable stiffness: flexible without cable end power circuit: connector 1 2.5-35 mm² - cable stiffness: flexible with cable end power circuit: connector 2 2.5-35 mm² - cable stiffness: flexible with cable end
Coil Technology	without built-in bidirectional peak limiting diode suppressor
Operating Time	12...26 ms closing 4...19 ms opening
Minimum Switching Voltage	17 V for control circuit
Maximum Operating Rate	3600 cyc/h 60 °C
Tightening Torque	control circuit 1.2 N.m screw clamp terminal flat Ø 6 mm control circuit 1.2 N.m screw clamp terminal Philips No 2 power circuit 5 N.m screw clamp terminal flat Ø 6 mm power circuit 5 N.m screw clamp terminal flat Ø 8 mm control circuit 1.2 N.m screw clamp terminal pozidriv No 2
Mechanical Durability	6000000 cycles
Auxiliary Contacts Type	mirror contact 1 NC IEC 60947-4-1 mechanically linked 1 NO + 1 NC IEC 60947-5-1
Compatibility Code	LC1D
Hold-In Power Consumption In Va	13-13 VA 50 Hz cos phi 0.3 (at 20 °C) 15-15 VA 60 Hz cos phi 0.3 (at 20 °C)
Overvoltage Category	III
Maximum Horse Power Rating	3 hp at 115 V AC 60 Hz for 1 phase motors conforming to CSA 3 hp at 115 V AC 60 Hz for 1 phase motors conforming to UL 15 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to CSA 15 hp at 200/208 V AC 60 Hz for 3 phase motors conforming to UL 15 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to CSA 15 hp at 230/240 V AC 60 Hz for 3 phase motors conforming to UL 40 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to CSA 40 hp at 460/480 V AC 60 Hz for 3 phase motors conforming to UL 40 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to CSA 40 hp at 575/600 V AC 60 Hz for 3 phase motors conforming to UL 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to CSA 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors conforming to UL
Motor Power Kw	22 kW at 380...400 V AC 50/60 Hz 25 kW at 415 V AC 50/60 Hz 30 kW at 440 V AC 50/60 Hz 30 kW at 500 V AC 50/60 Hz 33 kW at 660...690 V AC 50/60 Hz 15 kW at 220...230 V AC 50/60 Hz
[Ui] Rated Insulation Voltage	control circuit 600 V CSA control circuit 600 V UL power circuit 600 V CSA power circuit 600 V UL control circuit 690 V IEC 60947-1 power circuit 690 V IEC 60947-1
Heat Dissipation	4-5 W at 50/60 Hz for control circuit
Protective Cover	with
Country of Origin	Czechia
Width	55 mm
Height	122 mm
Weight	1.4 kg
[Uc] Control Circuit Voltage	480 V AC 60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	motor control resistive load
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-1 AC-2 AC-4 AC-3 AC-3e
[Ie] Rated Operational Current	80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit 50 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 50 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
Poles Description	3P
Device Short Name	LC1D

IEC contactor, TeSys D, nonreversing, 50A, 40HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 480VAC 60Hz coil, open

Specifications

Documents

Royal Wholesale Electric