LC1D50LE7 - Contactor, Tesys Deca, 3P(3NO),AC-3/AC-3e/ - Royal Wholesale Electric Suppliers

LC1D50LE7

Contactor, Tesys Deca, 3P(3NO),AC-3/AC-3e/<=440V 50A,208V AC 50/60Hz coil, screw clamp terminals

Add to Quote Catalogue

Specifications

Product Certifications	CCC CSA BV GL UL GOST DNV RINA LROS (Lloyds register of shipping) UKCA
Height	127 mm
Standards	CSA C22.2 No 14 UL 508 IEC 60947-4-1 IEC 60947-5-1 EN 60947-5-1 EN 60947-4-1
Climatic Withstand	IACS E10 exposure to damp heat
Net Weight	1.4 kg
Flame Retardance	V1 conforming to UL 94
Ip Degree Of Protection	IP2X IEC 60529 IP2X VDE 0106
Mechanical Robustness	shocks contactor opened 10 Gn for 11 ms) shocks contactor closed 15 Gn for 11 ms) vibrations contactor opened 2 Gn, 5...300 Hz) vibrations contactor closed 4 Gn, 5...300 Hz)
Operating Altitude	0...9842.52 ft (0...3000 m)
Fire Resistance	850 °C IEC 60695-2-1
Width	75 mm
Depth	119 mm
Warranty	18 months
Rohs Exemption Information	Yes
Mercury Free	Yes
Environmental Disclosure	ENVPEP110205EN
Sustainable Offer Status	Green Premium product
Pvc Free	Yes
Toxic Heavy Metal Free	Yes
California Proposition 65	WARNING: This product can expose you to chemicals including: Antimony oxide & Antimony trioxide, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	Pro-active China RoHS declaration (out of China RoHS legal scope)
Circularity Profile	N/A
Eu Rohs Directive	Compliant
Non-Overlap Time	1.5 ms on de-energisation between NC and NO contacts 1.5 ms on energisation between NC and NO contacts
Minimum Switching Current	5 mA for control circuit
Power Dissipation Per Pole	3.7 W AC-3 9.6 W AC-1 3.7 W AC-3e
Auxiliary Contact Composition	1 NO + 1 NC
Terminals Description Iso N°1	(A1-A2)CO (13-14)NO (21-22)NC
[Ith] Conventional Free Air Thermal Current	10 A (at 60 °C) for control circuit 80 A (at 60 °C) for power circuit
Control Circuit Voltage Limits	0.3...0.6 Uc -40-70 °C drop-out AC 50/60 Hz 0.8...1.1 Uc -40-60 °C operational AC 50 Hz 0.85...1.1 Uc -40-60 °C operational AC 60 Hz 1...1.1 Uc 60-70 °C operational AC 50/60 Hz
Mounting Support	rail plate
Control Circuit Type	AC 50/60 Hz
Safety Reliability Level	B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Insulation Resistance	> 10 MOhm for control circuit
Rated Breaking Capacity	900 A at 440 V for power circuit conforming to IEC 60947
Irms Rated Making Capacity	900 A at 440 V for power circuit conforming to IEC 60947 140 A AC for control circuit conforming to IEC 60947-5-1
Associated Fuse Rating	10 A gG for control circuit conforming to IEC 60947-5-1 100 A gG at <= 690 V coordination type 1 for power circuit 100 A gG at <= 690 V coordination type 2 for power circuit
Inrush Power In Va	140-140 VA cos phi 0.75 (at 20 °C) 160-160 VA cos phi 0.75 (at 20 °C)
[Uimp] Rated Impulse Withstand Voltage	8 kV IEC 60947
Pole Contact Composition	3 NO
Connections - Terminals	control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: rigid control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: rigid control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: rigid power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: rigid power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible without cable end power circuit: screw terminals 2 2.5-16 mm² - cable stiffness: flexible without cable end power circuit: screw terminals 1 2.5-25 mm² - cable stiffness: flexible with cable end power circuit: screw terminals 2 2.5-10 mm² - cable stiffness: flexible with cable end
Coil Technology	without built-in bidirectional peak limiting diode suppressor
Operating Time	4...19 ms opening 12...26 ms closing
Minimum Switching Voltage	17 V for control circuit
Maximum Operating Rate	3600 cyc/h 60 °C
Tightening Torque	control circuit 1.7 N.m screw clamp terminal flat Ø 6 mm control circuit 1.7 N.m screw clamp terminal Philips No 2 power circuit 5 N.m screw terminal flat Ø 6 to Ø 8 mm control circuit 1.7 N.m screw clamp terminal pozidriv No 2
Mechanical Durability	6000000 cycles
Auxiliary Contacts Type	mechanically linked 1 NO + 1 NC IEC 60947-5-1 mirror contact 1 NC IEC 60947-4-1
Compatibility Code	LC1D
Hold-In Power Consumption In Va	13-13 VA 60 Hz cos phi 0.3 (at 20 °C) 15-15 VA 50 Hz cos phi 0.3 (at 20 °C)
Overvoltage Category	III
Maximum Horse Power Rating	3 hp at 115 V AC 60 Hz for 1 phase motors 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors 15 hp at 200/208 V AC 60 Hz for 3 phase motors 15 hp at 230/240 V AC 60 Hz for 3 phase motors 40 hp at 460/480 V AC 60 Hz for 3 phase motors 40 hp at 575/600 V AC 60 Hz for 3 phase motors
Motor Power Kw	22 kW at 380...400 V AC 50 Hz 25 kW at 415 V AC 50 Hz 30 kW at 440 V AC 50 Hz 30 kW at 500 V AC 50 Hz 33 kW at 660...690 V AC 50 Hz 15 kW at 220...230 V AC 50 Hz 30 kW at 1000 V AC 50 Hz
[Ui] Rated Insulation Voltage	control circuit 600 V CSA control circuit 600 V UL power circuit 600 V CSA power circuit 600 V UL control circuit 690 V IEC 60947-1 power circuit 690 V IEC 60947-1
Heat Dissipation	4-5 W at 50/60 Hz for control circuit
Protective Cover	with
Country of Origin	United States
Width	75 mm
Height	127 mm
Weight	1.4 kg
[Uc] Control Circuit Voltage	208 V AC 50/60 Hz
[Ue] Rated Operational Voltage	power circuit <= 690 V AC 25...400 Hz
Range Of Product	TeSys Deca
Contactor Application	resistive load motor control
Product Or Component Type	contactor
Range	TeSys
Utilisation Category	AC-3 AC-2 AC-1 AC-4 AC-3e
[Ie] Rated Operational Current	50 A (at <60 °C) at <= 440 V AC AC-3 for power circuit 80 A (at <60 °C) at <= 440 V AC AC-1 for power circuit 50 A (at <60 °C) at <= 440 V AC AC-3e for power circuit
Poles Description	3P
Device Short Name	LC1D

Contactor, Tesys Deca, 3P(3NO),AC-3/AC-3e/<=440V 50A,208V AC 50/60Hz coil, screw clamp terminals

Specifications

Documents

Royal Wholesale Electric