ILA2T572TC1A0
integrated drive ILA with servo motor - 24..48 V - Modbus TCP - indus connector
Specifications
| Product Certifications |
|
|---|---|
| Standards |
|
| Ambient Air Temperature For Operation |
|
| Shock Resistance | 150 m/s² 1000 shocks EN/IEC 60068-2-29 |
| Vibration Resistance | 20 m/s² 10-500 Hz) 10 cycles EN/IEC 60068-2-6 |
| Permissible Ambient Air Temperature Around The Device |
|
| Ambient Air Temperature For Storage | -25-70 °C |
| Relative Humidity | 15-85 % without condensation |
| Ip Degree Of Protection |
|
| Operating Altitude | <= 3280.84 ft (1000 m) without derating |
| Warranty | 18 months |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP2011004EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Circularity Profile | ENVEOLI2011004EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Circle Diameter Of The Mounting Holes | 66.6 mm |
| Current Consumption |
|
| Commissioning Interface | RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds) |
| Maximum Switching Current |
|
| Maximum Radial Force Fr | 107 N |
| Mounting Support | flange |
| Number Of Motor Stacks | 2 |
| Rotor Inertia | 0.173 kg.cm² |
| Continuous Stall Torque | 0.57 N.m |
| Centring Collar Depth | 1.6 mm |
| Discrete Input Current |
|
| Second Shaft | without second shaft end |
| Marking | CE |
| Shaft Length | 20 mm |
| Net Weight | 1.7 kg |
| Voltage State 0 Guaranteed | -3...4.5 V |
| Centring Collar Diameter | 50 mm |
| Motor Flange Size | 57 mm |
| Peak Stall Torque | 0.85 N.m |
| Number Of Mounting Holes | 4 |
| Shaft Diameter | 9 mm |
| Discrete Output Voltage | 23...25 V |
| Supply Voltage Limits | 18-55.2 V |
| Mounting Holes Diameter | 5.2 mm |
| Speed Feedback Resolution | 16384 points/turn |
| Type Of Cooling | natural convection |
| Service Life In Hours | 20000 h bearing |
| Shaft End | untapped |
| Feedback Type | single turn encoder |
| Protection Type |
|
| Transmission Rate | 10, 100 Mbits |
| Accuracy Error | +/- 0.05 ° |
| Input/Output Type | 4 signals (each be used as input or output) |
| Maximum Axial Force Fa |
|
| Associated Fuse Rating | 16 A |
| Voltage State 1 Guaranteed | 15...30 V |
| Country of Origin | Germany |
| Weight | 1.7 kg |
| Range Of Product | Lexium integrated drive |
| Network Type | DC |
| Winding Type | high speed of rotation and medium torque |
| Number Of Motor Poles | 6 |
| Holding Brake | without |
| Product Or Component Type | motion integrated drive |
| Phase | single phase |
| Length | 163.8 mm |
| [Us] Rated Supply Voltage |
|
| Communication Interface | Modbus TCP, Integrated |
| Gear Box Type | without |
| Motor Type | AC Synchronous Servo Motor |
| Nominal Speed |
|
| Electrical Connection | industrial connector |
| Nominal Torque | 0.57 N.m |
| Device Short Name | ILA |
