BRS366H030ABA
3-phase stepper motor - 1.02Nm - shaft Ø6.35mm -L=56mm - without brake -term box
Specifications
| Ambient Air Temperature For Operation | -25-40 °C |
|---|---|
| Standards |
|
| Temperature Class | F winding IEC 60034-1 |
| Vibration Resistance |
|
| Ambient Air Temperature For Storage | -25-70 °C |
| Type Of Cooling | natural convection |
| Relative Humidity | 15-85 % without condensation |
| Ip Degree Of Protection |
|
| Operating Altitude | <= 3280.84 ft (1000 m) without power derating |
| Warranty | 18 months |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP111101EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Circularity Profile | N/A |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Circle Diameter Of The Mounting Holes | 66.6 mm |
| Maximum Radial Force Fr |
|
| Nominal Torque | 0.9 N.m |
| Rotor Inertia | 0.22 kg.cm² |
| Centring Collar Depth | 1.6 mm |
| Holding Brake | without |
| Second Shaft | without second shaft end |
| Shaft Length | 21 mm |
| Net Weight | 1.6 kg |
| Resolution |
|
| Angular Acceleration | 200000 rad/s² |
| Maximum Starting Frequency | 8 kHz |
| Time Constant | 3.3 ms |
| Number Of Mounting Holes | 4 |
| Holding Torque | 1.02 N.m |
| Shaft Diameter | 6.35 mm |
| Mounting Holes Diameter | 5.2 mm |
| Service Life In Hours | 20000 h bearing) |
| Resistance | 0.5 Ohm winding) |
| Shaft End | smooth shaft |
| Electrical Connection | terminal box |
| Line Rated Current | 5.8 A |
| Accuracy Error | +/- 6 arc min |
| Maximum Axial Force Fa |
|
| Country of Origin | United States |
| Weight | 1.6 kg |
| Maximum Mechanical Speed | 3000 rpm |
| Mounting Support | flange |
| Number Of Motor Poles | 6 |
| Product Or Component Type | motion control motor |
| Length | 93 mm |
| Centring Collar Diameter | 38 mm |
| Motor Flange Size | 57.2 mm |
| Motor Type | 3-phase stepper motor |
| Supply Voltage Limits |
|
| Range Compatibility | Lexium SD3 |
| Device Short Name | BRS3 |
