BMI0703T26A
servo motor BMI 1-phase - untapped IP65 single turn - 32768 p/t
Specifications
| Ip Degree Of Protection | IP65 |
|---|---|
| Warranty | 18 months |
| Rohs Exemption Information | Yes |
| Mercury Free | Yes |
| Environmental Disclosure | ENVPEP1312017EN |
| Sustainable Offer Status | Green Premium product |
| Pvc Free | Yes |
| California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
| Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
| China Rohs Regulation | X |
| Circularity Profile | ENVEOLI1312017EN |
| Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Maximum Mechanical Speed | 8000 rpm |
| Output Current 3S Peak | 10.5 A 230 V 3 s |
| Stator Electrical Time Constant | 0.88 ms 20 °C |
| Circle Diameter Of The Mounting Holes | 75-82 mm |
| Maximum Radial Force Fr |
|
| Mounting Support | international standard flange |
| Number Of Motor Stacks | 3 |
| Rotor Inertia | 1.67 kg.cm² |
| Number Of Motor Poles | 10 |
| Back Emf Constant | 54.44 V/krpm 20 °C |
| Maximum Axial Force Fa | 0.2 x Fr |
| Centring Collar Depth | 2.5 mm |
| Holding Brake | without |
| Speed Feedback Resolution | 32768 points/turn |
| Second Shaft | without second shaft end |
| Product Compatibility |
|
| Network Frequency Limits | 47.5-63 Hz |
| Shaft Length | 30 mm |
| Phase | single phase |
| Maximum Current Irms |
|
| Length | 300 mm |
| Centring Collar Diameter | 60 mm |
| Stator Inductance | 2.28 mH 20 °C |
| Motor Flange Size | 70 mm |
| Peak Stall Torque |
|
| Number Of Mounting Holes | 4 |
| Distance Shaft Shoulder-Flange | 2.5 mm |
| Shaft Diameter | 14 mm |
| Nominal Output Power |
|
| [Us] Rated Supply Voltage | 115...230 V - 15...10 % |
| Supply Voltage Limits | 100-240 V |
| Mounting Holes Diameter | 5.5 mm |
| Type Of Cooling | natural convection |
| Shaft End | untapped |
| Nominal Speed |
|
| Electrical Connection | printed circuit board connector |
| Feedback Type | absolute single turn SinCos Hiperface |
| Stator Resistance | 2.58 Ohm 20 °C |
| Emc Filter | integrated |
| Continuous Stall Current | 3.5 A |
| Nominal Torque |
|
| Continuous Output Current | 3.5 A 8 kHz |
| Torque Constant | 0.81 N.m/A 20 °C |
| Supply Frequency | 50/60 Hz - 5...5 % |
| Continuous Stall Torque | 3.4 N.m 115...230 V single phase |
| Country of Origin | Germany |
| Length | 300 mm |
| Product Or Component Type | servo motor with power stage |
| Range Compatibility | Lexium 32i |
| Device Short Name | BMI |
