BCPMSCB60S - BCPM power monitoring intermediate - 60 split core CT 50 A

BCPMSCB60S

BCPM power monitoring intermediate - 60 split core CT 50 A

This is an integrated solution for monitoring multi-circuits and mains by using a single meter. The meter is designed for retrofit and is used for critical power operations in data centres and energy management in buildings. It offers class 1 (1 %) power and energy system accuracy (including 50A, 100A or 200A split-core current transformers) on all branch channels. The BCPM monitors both the 60 branch circuits and mains values and only the mains incoming power and energy. All to provide information on the complete Power Distribution Unit. Adapter boards with terminals for split-core CTs can be mounted using DIN-rail, Snaptrack or on a common mounting plate with the main board Full alarming capabilities ensure that potential issues are dealt with before they become problems. Communication enabled with a RS485 serial port and the Modbus protocol support, more communication options with the gateway H8951. The meter need to be powered by a 90V AC to 277V AC supply source. Include 50A branch CTs with 2 meters leads and 1.8 meters round ribbon cables, for 60 split-core current transformers. The device dimensions are 228mm in width, 146mm in height and weight 1.5 kilograms.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Height	146 mm
Standards	ANSI C12.1 IEC 61036 UL 508 EN 61010
Mounting Support	board
Product Certifications	UL
Net Weight	1.5 kg
Mounting Mode	clip-on
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	0-95 % 0-60 °C
Width	288 mm
Operating Altitude	9842.52 ft (3000 m)
Warranty	18 months
California Proposition 65	WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Eu Rohs Directive	Compliant
Communication Port Support	RS485
Measurement Voltage	90-277 V phase to neutral 150-480 V phase to phase
Sampling Rate	256 samples/cycle
Communication Port Protocol	Modbus RTU
Communication Of Data	high current alarm under voltage alarm low current alarm high-high current alarm low-low current alarm over voltage alarm
Provided Equipment	4 x cables 4 x adapter board 60 x current transformer
Measurement Accuracy	branch current 2 % 0.25…2 A branch current 1 % 2…100 A mains current 3 % 1…100 % mains current 3 % 2…100 % voltage 1 % 90…277 V
Update Time	1.8 s
Analogue Input Type	split core CT 0.333 V60 x
Country of Origin	United States
Width	288 mm
Height	146 mm
Weight	1.5 kg
Network Frequency	60 Hz 50 Hz
Power Quality Analysis	voltage sag and swell detection
Variant	intermediate
Type Of Measurement	voltage current frequency active power power factor active energy
Power Monitoring	basic instrumentation
Product Or Component Type	multi-circuit energy meter
Product Name	PowerLogic BCPMSC
Range	PowerLogic
Energy Management	sub billing and cost allocation
[Us] Rated Supply Voltage	90...277 V AC 50/60 Hz +/- 1 %
Device Application	sub billing
Device Short Name	BCPMSCB

BCPM power monitoring intermediate - 60 split core CT 50 A

Specifications

Documents

Royal Wholesale Electric