This product is part of the Lexium 28 range, an offer of motion servo drives for machines from 0.05 to 4.5kW. The brushless servo motor features a high moment of inertia with maximum mechanical speed of 5000RPM and IP65 parallel keyed shaft without holding brake. It is equipped with a 20bit single-turn absolute encoder, optimized in terms of speed of rotation (3000RPM). It is a second generation servo motors suitable for a wide variety of applications due to the different levels of motor inertia offered. It has a rated supply voltage of 220V, a continuous stall current of 4.01A and a continuous power of 750W. The shaft dimensions are 19mm (Diameter) x 35mm (Length). It is furnished with free lead for electrical connection. It is an IP50 (IM V3) and IP65 (IM B5, IM V1) rated product. Its dimensions are 138mm (Length) x 80mm (Width), centring collar dimensions are 4mm (Depth) x 70mm (Diameter) with 90mm circle diameter of the mounting hole. It weighs 2.9kg. This product is compatible with Lexium 28 and Lexium 26D servo drives. It supports Asian standard 80mm flange mount with a natural convection cooling system. Lexium 28 and Lexium BCH2, the optimized servo bundle for all motion control solutions are cost effective, energy efficient and embedded safety. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.
Brand: Schneider Electric
Add to Quote CatalogueProduct Or Component Type | servo motor |
---|---|
Range Compatibility | Lexium 28 |
Device Short Name | BCH2 |
Circle Diameter Of The Mounting Holes | 90 mm |
Maximum Permanent Current | 4.29 A |
Continuous Power | 750 W |
Maximum Mechanical Speed | 5000 rpm |
Product Compatibility |
|
Stator Electrical Time Constant | 4.07 ms 20 °C |
Maximum Radial Force Fr | 332 N 3000 rpm |
Electrical Connection | free lead |
Mounting Support | asian standard flange |
Number Of Motor Stacks | 2 |
Rotor Inertia | 1.54 kg.cm² |
Back Emf Constant | 36 V/krpm 20 °C |
Maximum Axial Force Fa | 115 N |
Centring Collar Depth | 4 mm |
Holding Brake | without |
Shaft Length | 35 mm |
Brake Pull-In Power | 10.2 W |
Phase |
|
Maximum Current Irms |
|
Length | 138 mm |
Net Weight | 2.9 kg |
Centring Collar Diameter | 70 mm |
Stator Inductance | 6.1 mH 20 °C |
Motor Flange Size | 80 mm |
[Us] Rated Supply Voltage |
|
Nominal Output Power |
|
Peak Stall Torque |
|
Number Of Mounting Holes | 4 |
Distance Shaft Shoulder-Flange | 4 mm |
Shaft Diameter | 19 mm |
Key Width | 6 mm |
Mounting Holes Diameter | 6.6 mm |
Type Of Cooling | natural convection |
Shaft End | keyed |
Nominal Speed |
|
Feedback Type | 20 bits single turn absolute encoder |
Stator Resistance | 1.5 Ohm 20 °C |
Continuous Stall Current | 4.01 A |
Nominal Torque |
|
Torque Constant | 0.6 N.m/A 20 °C |
Continuous Stall Torque |
|
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP1504002EN |
Sustainable Offer Status | Green Premium product |
Pvc Free | Yes |
Reach Regulation | Free of Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Reach Free Of Svhc | Yes |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI1504002EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Ambient Air Temperature For Operation | -20-40 °C |
Ip Degree Of Protection |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366