ATV630D11S6X - variable speed drive, Altivar Process ATV600, ATV630, 15hp, 600V, IP21

ATV630D11S6X

variable speed drive, Altivar Process ATV600, ATV630, 15hp, 600V, IP21

Add to Quote Catalogue

Specifications

Mercury Free	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Upgradeability	Upgraded components available
Environmental Disclosure	ENVPEP1707007EN
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile	ENVEOLI1707007EN
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Country of Origin	Indonesia
Width	171 mm
Height	409 mm
Weight	5.5 kg
Prospective Line Isc	70 kA
Product Destination	asynchronous motors synchronous motors
Line Current	15.3 A 600 V normal duty) 11.1 A 600 V heavy duty)
Emc Filter	without EMC filter
Asynchronous Motor Control Profile	constant torque standard variable torque standard optimized torque mode
Variant	standard version
Product Or Component Type	variable speed drive
Apparent Power	15.9 kVA 600 V normal duty) 11.5 kVA 600 V heavy duty)
Switching Frequency	2...12 kHz adjustable 4...12 kHz with derating factor
Communication Port Protocol	Modbus TCP Ethernet Modbus serial
Product Specific Application	process and utilities
Safety Function	STO (safe torque off) SIL 3
Maximum Horse Power Rating	15 hp 600 V normal duty 10 hp 600 V heavy duty
Supply Frequency	50...60 Hz - 5...5 %
Option Card	slot A communication module, Profibus DP V1 slot A communication module, PROFINET slot A communication module, DeviceNet slot A communication module, Modbus TCP/EtherNet/IP slot A communication module, CANopen daisy chain RJ45 slot A communication module, CANopen SUB-D 9 slot A communication module, CANopen screw terminals slot A/slot B digital and analog I/O extension module slot A/slot B output relay extension module slot A communication module, Ethernet IP/Modbus TCP/MD-Link communication module, BACnet MS/TP communication module, Ethernet Powerlink
Degree Of Protection	UL type 1 UL 508C
Range Of Product	Altivar Process ATV600
Speed Drive Output Frequency	0.1-500 Hz
Ip Degree Of Protection	IP21IEC 61800-5-1 IP21IEC 60529
[Us] Rated Supply Voltage	600 V - 15...10 %
Discrete Input Logic	16 preset speeds
Type Of Cooling	forced convection
Continuous Output Current	18 A 4 kHz normal duty 13.5 A 4 kHz heavy duty
Nominal Switching Frequency	4 kHz
Device Short Name	ATV630
Synchronous Motor Control Profile	permanent magnet motor synchronous reluctance motor
Discrete Input Logic	positive logic (source) DI1...DI8), < 5 V, > 11 V negative logic (sink) DI1...DI8), > 16 V, < 10 V
Analogue Output Type	software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits software-configurable current AQ1, AQ2 0...20 mA 10 bits software-configurable current DQ-, DQ+ 30 V DC software-configurable current DQ-, DQ+ 100 mA
Discrete Output Type	relay outputs R1A, R1B, R1C 250 V AC 3000 mA relay outputs R1A, R1B, R1C 30 V DC 3000 mA relay outputs R2A, R2C 250 V AC 5000 mA relay outputs R2A, R2C 30 V DC 5000 mA relay outputs R3A, R3C 250 V AC 5000 mA relay outputs R3A, R3C 30 V DC 5000 mA
Maximum Switching Current	relay output R1, R2, R3 resistive, cos phi = 1 3 A 250 V AC relay output R1, R2, R3 resistive, cos phi = 1 3 A 30 V DC relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 250 V AC relay output R1, R2, R3 inductive, cos phi = 0.4 7 ms 2 A 30 V DC
Exchange Mode	half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
Phase	3 phase
Net Weight	5.5 kg
Type Of Polarization	no impedance
Frequency Resolution	display unit 0.1 Hz analog input 0.012/50 Hz
Relay Output Type	configurable relay logic R1 fault relay NO/NC 100000 cycles configurable relay logic R2 sequence relay NO 100000 cycles configurable relay logic R3 sequence relay NO 100000 cycles
Maximum Transient Current	19.8 A 60 s normal duty) 20.3 A 60 s heavy duty)
Analogue Input Number	3
Motor Slip Compensation	automatic whatever the load can be suppressed not available in permanent magnet motor law adjustable
Discrete Output Number	0
Method Of Access	slave Modbus TCP
Discrete Input Number	8
Local Signalling	for local diagnostic 3 LEDs for embedded communication status 3 LEDs (dual colour) for communication module status 4 LEDs (dual colour) for presence of voltage 1 LED (red)
Linearity Error	AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AO1, AO2 +/- 0.2 % analog output
Number Of Addresses	1-247 Modbus serial
Width	171 mm
Transmission Rate	10, 100 Mbits 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
Depth	233 mm
Analogue Input Type	AI1, AI2, AI3 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA 250 Ohm 12 bits AI2 voltage analog input - 10...10 V DC 31.5 kOhm 12 bits
Sampling Duration	2 ms +/- 0.5 ms DI1...DI4) - discrete input 5 ms +/- 1 ms DI5, DI6) - discrete input 5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input 10 ms +/- 1 ms AO1) - analog output
Electrical Connection	control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16 motor screw terminal 6...10 mm² AWG 10...AWG 8 line side screw terminal 6...10 mm² AWG 10...AWG 8
Maximum Output Frequency	500 kHz
Height	409 mm
Acceleration And Deceleration Ramps	linear adjustable separately from 0.01...9999 s S, U or customized
Transmission Frame	RTU
Relay Output Number	3
Data Format	8 bits, configurable odd, even or no parity
Accuracy	+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
Connector Type	RJ45 on the remote graphic terminal)Ethernet/Modbus TCP RJ45 on the remote graphic terminal)Modbus serial
Input Compatibility	DI1...DI6 discrete input level 1 PLC IEC 61131-2 DI5, DI6 discrete input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC IEC 61131-2
Permissible Temporary Current Boost	1.1 x In 60 s normal duty) 1.5 x In 60 s heavy duty)
Mounting Mode	wall mount
Analogue Output Number	2
Physical Interface	Ethernet 2-wire RS 485
Minimum Switching Current	relay output R1, R2, R3 5 mA 24 V DC
Refresh Time	relay output R1, R2, R3)5 ms +/- 0.5 ms)
Enclosure Mounting	wall mounted
Isolation	between power and control terminals
Output Voltage	<= power supply voltage
Quantity Per Set	1
Braking To Standstill	by DC injection
Discrete Input Type	DI7, DI8 programmable as pulse input 0-30 kHz, 24 V DC <= 30 V)
Protection Type	thermal protection motor safe torque off motor motor phase break motor thermal protection drive safe torque off drive overheating drive overcurrent between output phases and earth drive overload of output voltage drive short-circuit protection drive motor phase break drive overvoltages on the DC bus drive line supply overvoltage drive line supply undervoltage drive line supply phase loss drive overspeed drive break on the control circuit drive
Supply	external supply for digital inputs 24 V DC 19-30 V), <1.25 mA overload and short-circuit protection internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection internal supply for digital inputs and STO 24 V DC 21-27 V), <200 mA overload and short-circuit protection
Product Certifications	TÜV UL CSA
Power Dissipation In W	natural convection 114 W 600 V 4 kHz forced convection 152 W 600 V 4 kHz
Standards	UL 508C IEC 61800-3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
Insulation Resistance	> 1 MOhm 500 V DC for 1 minute to earth
Shock Resistance	15 gn 11 ms IEC 60068-2-27
Vibration Resistance	1.5 mm peak to peak 2-13 Hz)IEC 60068-2-6 1 gn 13-200 Hz)IEC 60068-2-6
Regulation Loop	adjustable PID regulator
Operating Altitude	<= 3280.84 ft (1000 m) without derating 1000...4800 m with current derating 1 % per 100 m
Overvoltage Category	III
Electromagnetic Compatibility	electrostatic discharge immunity test level 3 IEC 61000-4-2 radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3 electrical fast transient/burst immunity test level 4 IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5 conducted radio-frequency immunity test level 3 IEC 61000-4-6
Ambient Air Temperature For Operation	-15-50 °C without derating) 50-60 °C with derating factor)
Volume Of Cooling Air	103 m3/h
Pollution Degree	2 IEC 61800-5-1
Noise Level	56 dB
Ambient Air Temperature For Storage	-40-70 °C
Relative Humidity	5-95 % without condensation IEC 60068-2-3
Operating Position	vertical +/- 10 degree
Maximum Thdi	<48 % with external line choke IEC 61000-3-12

variable speed drive, Altivar Process ATV600, ATV630, 15hp, 600V, IP21

Specifications

Documents

Royal Wholesale Electric