This Altistart 22 soft starter can feed 3-phase asynchronous motors in supply line or delta connection. It has a rating of 140A and 230V to 440V, a rated power up to 75kW (400V to 440V in supply line) and up to 110kW (400V to 440V in motor delta connection). It is designed for simple and complex machines such as centrifugal and piston pumps, fans, screw compressors and material handling equipment. Slim form factor improves versatility; allows mounting in frames of any kind of machines. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Compatibility with SoMove software allows configurations and settings to be easily transferred, meaning spares can be quickly installed. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Brand: Schneider Electric
Add to Quote CatalogueProduct Destination | asynchronous motors |
---|---|
[Us] Rated Supply Voltage | 230...440 V - 15...10 % |
Range Of Product | Altistart 22 |
Product Or Component Type | soft starter |
Component Name | ATS22 |
Phase | 3 phase |
Power Dissipation In W | 82 W for standard applications |
Icl Starter Rating | 140 A connection in the motor supply line for standard applications |
Type Of Start | start with torque control (current limited to 3.5 In) |
Utilisation Category | AC-53A |
Product Specific Application | pumps and fans |
Ip Degree Of Protection | IP00 |
Factory Setting Current | 131 A |
Motor Power Kw |
|
Warranty | 18 months |
Device Connection |
|
Network Frequency | 45...66 Hz |
Minimum Switching Current | 100 mA 12 V DC relay outputs) |
[Uc] Control Circuit Voltage | 230 V - 15...10 % 50/60 Hz |
Height | 356 mm |
Discrete Output Type |
|
Maximum Switching Current |
|
Discrete Input Voltage | 24 V <= 30 V |
Marking | CE |
Power Range |
|
Net Weight | 18 kg |
Output Current | 0.4...1 Icl adjustable |
Installed Device | 31 |
Connector Type | 1 RJ45 |
Motor Starter Type | soft starter |
Communication Data Link | serial |
Function Available | internal bypass |
Discrete Output Number | 2 |
Control Circuit Consumption | 20 W |
Communication Port Protocol | Modbus |
Supply Voltage Limits | 195-484 V |
Discrete Input Type | LI1, LI2, LI3) logic, 5 mA 4.3 kOhm |
Physical Interface | RS485 multidrop |
Type Of Cooling | forced convection |
Discrete Input Number | 3 |
Assembly Style | with heat sink |
Operating Position | vertical +/- 10 degree |
Ptc Probe Input | 750 Ohm |
Width | 150 mm |
Transmission Rate | 4800, 9600 or 19200 bps |
Depth | 229.5 mm |
Discrete Input Logic | positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA |
Protection Type |
|
Supply Frequency | 50...60 Hz - 10...10 % |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Environmental Disclosure | ENVPEP100401EN |
Sustainable Offer Status | Green Premium product |
Reach Regulation | Reference contains Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI110804EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Product Certifications |
|
Standards | EN/IEC 60947-4-2 |
Electromagnetic Compatibility |
|
Ambient Air Temperature For Operation |
|
Shock Resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
Vibration Resistance |
|
Pollution Degree | level 2 IEC 60664-1 |
Noise Level | 56 dB |
Ambient Air Temperature For Storage | -25-70 °C |
Relative Humidity | 0-95 % without condensation or dripping water EN/IEC 60068-2-3 |
Operating Altitude |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366