ATS01N206QN - soft starter for asynchronous motor, Altistart 01, ATS01, 6A, 380 to 415V, 1.5 to 3kW

ATS01N206QN

soft starter for asynchronous motor, Altistart 01, ATS01, 6A, 380 to 415V, 1.5 to 3kW

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 1.1kW or 1.5hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Brand: Schneider Electric

Add to Quote Catalogue

Specifications

Current Consumption	30 A at nominal load
Product Destination	asynchronous motors
Range Of Product	Altistart 01
Product Or Component Type	soft starter
Motor Power Kw	3 kW, 3 phase 380...415 V 1.5 kW, 3 phase 380...415 V 2.2 kW, 3 phase 380...415 V
Phase	3 phase
Power Dissipation In W	4 W at full load and at end of starting 64 W in transient state
Utilisation Category	AC-53B EN/IEC 60947-4-2
Icl Starter Rating	6 A
Type Of Start	start with voltage ramp
[Us] Rated Supply Voltage	380...415 V - 10...10 %
Product Specific Application	simple machine
Device Short Name	ATS01
Warranty	18 months
Electrical Connection	4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Network Frequency	47.5...63 Hz
[Uc] Control Circuit Voltage	built into the starter
Height	124 mm
Deceleration Time Symb	adjustable from 1 to 10 s
Discrete Input Voltage	24...40 V
Maximum Switching Current	relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
Discrete Output Voltage	24 V 6...30 V) open collector logic
Marking	CE
Power Range	1.1-2 kW 380-440 V 3 phase 2.2-3 kW 380-440 V 3 phase
Net Weight	0.42 kg
Discrete Output Current	2 A DC-13 3 A AC-15
Motor Starter Type	soft starter
Function Available	integrated bypass
Supply Voltage Limits	342-456 V
Starting Time	1 s / 100 5 s / 20 10 s / 10 adjustable from 1 to 10 s
Minimum Switching Current	10 mA 6 V DC relay outputs
Discrete Input Type	logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Assembly Style	with heat sink
Compatibility Code	ATS01N2
Output Voltage	<= power supply voltage
Operating Position	vertical +/- 10 degree
Display Type	1 LED Green)starter powered up 1 LED Yellow)nominal voltage reached
Width	45 mm
Depth	131 mm
Discrete Input Logic	positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
Starting Torque	30...80 % of starting torque of motor connected directly on the line supply
Tightening Torque	1.9-2.5 N.m 0.5-0.5 N.m
Supply Frequency	50...60 Hz - 5...5 %
Discrete Output Type	open collector logic LO1 end of starting signal relay outputs R1A, R1C NO
Rohs Exemption Information	Yes
Mercury Free	Yes
Toxic Heavy Metal Free	Yes
Reach Regulation	Free of Substances of Very High Concern above the threshold
California Proposition 65	WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc	Yes
Weee	The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation	X
Eu Rohs Directive	Pro-active compliance (Product out of EU RoHS legal scope)
Product Certifications	UL B44.1-96/ASME A17.5 for starter wired to the motor delta terminal CSA GOST C-tick CCC
Standards	EN/IEC 60947-4-2
Electromagnetic Compatibility	conducted and radiated emissions level B CISPR 11 immunity to electrical transients level 4 IEC 61000-4-4 immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 micro-cuts and voltage fluctuation IEC 61000-4-11 voltage/current impulse level 3 IEC 61000-4-5 conducted and radiated emissions level B IEC 60947-4-2 damped oscillating waves level 3 IEC 61000-4-12 electrostatic discharge level 3 IEC 61000-4-2 EMC immunity EN 50082-1 EMC immunity EN 50082-2 harmonics IEC 1000-3-2 harmonics IEC 1000-3-4 immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
Ambient Air Temperature For Operation	-10-40 °C without derating) 40-50 °C with current derating of 2 % per °C)
Shock Resistance	15 gn 11 ms EN/IEC 60068-2-27
Vibration Resistance	1 gn 13-150 Hz)EN/IEC 60068-2-6 1.5 mm peak to peak 3-13 Hz)EN/IEC 60068-2-6
Pollution Degree	2 EN/IEC 60947-4-2
Ambient Air Temperature For Storage	-25-70 °C EN/IEC 60947-4-2
Relative Humidity	5-95 % without condensation or dripping water EN/IEC 60068-2-3
Ip Degree Of Protection	IP20
Operating Altitude	<= 3280.84 ft (1000 m) without derating > 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m

soft starter for asynchronous motor, Altistart 01, ATS01, 6A, 380 to 415V, 1.5 to 3kW

Specifications

Documents

Royal Wholesale Electric