This Altistart 01 soft starter is DIN rail mounted and can feed single or 3-phase asynchronous motors with a rating up to 6A. This Altistart 01 can be used for a motor rated power up to 3kW or 3hp for 3-phase (110V to 480V AC) and up to 0.75kW for single phase (110V to 230V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 22.5mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.
Brand: Schneider Electric
Add to Quote CatalogueCurrent Consumption | 30 A at nominal load |
---|---|
Product Destination | asynchronous motors |
Range Of Product | Altistart 01 |
Product Or Component Type | soft starter |
Motor Power Kw |
|
Phase | 1 phase |
Power Dissipation In W |
|
Utilisation Category | AC-53B EN/IEC 60947-4-2 |
Icl Starter Rating | 6 A |
Type Of Start | start with voltage ramp |
[Us] Rated Supply Voltage | 110...480 V - 10...10 % |
Product Specific Application | simple machine |
Maximum Horse Power Rating |
|
Device Short Name | ATS01 |
Warranty | 18 months |
Electrical Connection |
|
Network Frequency | 47.5...63 Hz |
[Uc] Control Circuit Voltage |
|
Height | 100 mm |
Marking | CE |
Power Range |
|
Net Weight | 0.16 kg |
Discrete Output Current |
|
Motor Starter Type | soft starter |
Function Available | integrated bypass |
Supply Voltage Limits | 99-528 V |
Starting Time |
|
Assembly Style | with heat sink |
Compatibility Code | ATS01N1 |
Output Voltage | <= power supply voltage |
Operating Position | vertical +/- 10 degree |
Width | 23 mm |
Depth | 100 mm |
Starting Torque | 30...80 % of starting torque of motor connected directly on the line supply |
Tightening Torque | 0.8-0.8 N.m |
Supply Frequency | 50...60 Hz - 5...5 % |
Rohs Exemption Information | Yes |
Mercury Free | Yes |
Toxic Heavy Metal Free | Yes |
Reach Regulation | Free of Substances of Very High Concern above the threshold |
California Proposition 65 | WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Reach Free Of Svhc | Yes |
Weee | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
China Rohs Regulation | X |
Circularity Profile | ENVEOLI100217EN |
Eu Rohs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
Product Certifications |
|
Standards | EN/IEC 60947-4-2 |
Electromagnetic Compatibility |
|
Ambient Air Temperature For Operation |
|
Shock Resistance | 15 gn 11 ms EN/IEC 60068-2-27 |
Vibration Resistance |
|
Pollution Degree | 2 EN/IEC 60947-4-2 |
Ambient Air Temperature For Storage | -25-70 °C EN/IEC 60947-4-2 |
Relative Humidity | 5-95 % without condensation or dripping water EN/IEC 60068-2-3 |
Ip Degree Of Protection | IP20 |
Operating Altitude |
|
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366