| Range Of Product |
Altivar Process ATV600 |
| Product Or Component Type |
Variable speed drive |
| Product Specific Application |
Process and utilities |
| Device Short Name |
ATV650 |
| Variant |
Standard version |
| Product Destination |
Asynchronous motors
Synchronous motors |
| IP Degree Of Protection |
IP55IEC 61800-5-1 |
| Type Of Cooling |
Forced convection |
| Motor Power kW |
55 kW normal duty) |
| Motor Power Hp |
75 hp normal duty |
| Line Current |
97.2 A 380 V normal duty)
84.2 A 480 V normal duty)
81.4 A 380 V heavy duty) |
| Prospective Line Isc |
50 kA |
| Apparent Power |
70 kVA 480 V normal duty) |
| Continuous Output Current |
106 A 2.5 kHz normal duty |
| Max Transient Current |
116.6 A 60 s normal duty) |
| Async Motor Control Profile |
Variable torque standard
Constant torque standard
Optimized torque mode |
| Sync Motor Control Profile |
Permanent magnet motor
Synchronous reluctance motor |
| Output Frequency |
0.0001…0.5 kHz |
| Speed Drive Output Frequency |
0.1…599 Hz |
| Nominal Switching Frequency |
2.5 kHz |
| Switching Frequency |
2.5...8 kHz with derating factor |
| Discrete Input Logic |
16 preset speeds |
| Communication Port Protocol |
Modbus serial
Modbus TCP
Ethernet |
| Option Card |
Slot A communication module, Profibus DP V1
Slot A communication module, Profinet
Slot A communication module, DeviceNet
Slot A communication module, Modbus TCP/EtherNet/IP
Slot A communication module, CANopen daisy chain RJ45
Slot A communication module, CANopen SUB-D 9
Slot A communication module, CANopen screw terminals
Slot A/slot B digital and analog I/O extension module
Slot A/slot B output relay extension module
Slot A communication module, Ethernet IP/Modbus TCP/MD-Link
communication module, BACnet MS/TP |
| Output Voltage |
<= power supply voltage |
| Perm Temporary Current Boost |
1.1 x In 60 s normal duty) |
| Motor Slip Compensation |
Automatic whatever the load
Not available in permanent magnet motor law
Adjustable
Can be suppressed |
| Accel And Decel Ramps |
Linear adjustable separately from 0.01...9999 s |
| Braking To Standstill |
By DC injection |
| Protection Type |
Thermal protection motor
Safe torque off motor
Motor phase break motor
Thermal protection drive
Safe torque off drive
Overheating drive
Overcurrent between output phases and earth drive
Overload of output voltage drive
Short-circuit protection drive
Motor phase break drive
Overvoltages on the DC bus drive
Line supply overvoltage drive
Line supply undervoltage drive
Line supply phase loss drive
Overspeed drive |
| Frequency Resolution |
Display unit 0.1 Hz |
| Electrical Connection |
Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16
Motor screw terminal 70...120 mm² AWG 1/0...250 kcmil |
| Connector Type |
RJ45 on the remote graphic terminal)Ethernet/Modbus TCP |
| Transmission Rate |
10/100 Mbit/s Ethernet IP/Modbus TCP |
| Supply |
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection |
| Local Signalling |
Local diagnostic 3 LEDs
Embedded communication status 3 LEDs dual colour)
Communication module status 4 LEDs dual colour) |
| Width |
13.58 in (345 mm) |
| Height |
49.21 in (1250 mm) |
| Depth |
14.76 in (375 mm) |
| Analogue Input Number |
3 |
| Analogue Input Type |
AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits |
| Discrete Input Number |
8 |
| Discrete Input Type |
DI1...DI6 programmable, 24 V DC <= 30 V)3.5 kOhm
DI5, DI6 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) |
| Input Compatibility |
DI1...DI6 discrete input level 1 PLC EN/IEC 61131-2
DI5, DI6 discrete input level 1 PLC IEC 65A-68 |
| Discrete Input Logic |
Positive logic (source) DI1...DI6), < 5 V, > 11 V
Negative logic (sink) DI1...DI6), > 16 V, < 10 V
Positive logic (source) DI5, DI6), < 0.6 V, > 2.5 V |
| Analogue Output Number |
2 |
| Analogue Output Type |
Software-configurable voltage AO1, AO2 0...10 V DC 470 Ohm 10 bits |
| Sampling Duration |
2 ms +/- 0.5 ms DI1...DI4) - discrete input
5 ms +/- 1 ms DI5, DI6) - discrete input
5 ms +/- 0.1 ms AI1, AI2, AI3) - analog input |
| Accuracy |
+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input |
| Linearity Error |
AI1, AI2, AI3 +/- 0.15 % of maximum value analog input |
