| Range Of Product |
Altivar Process ATV600 |
| Product Or Component Type |
Variable speed drive |
| Product Specific Application |
Process and utilities |
| Device Short Name |
ATV630 |
| Variant |
Standard version |
| Product Destination |
Synchronous motors
Asynchronous motors |
| Emc Filter |
Without EMC filter |
| IP Degree Of Protection |
IP20IEC 61800-5-1
IP20IEC 60529 |
| Degree Of Protection |
UL type 1 UL 508C |
| Type Of Cooling |
Forced convection |
| Supply Frequency |
50...60 Hz - 5...5 % |
| Network Number Of Phases |
3 phase |
| [Us] Rated Supply Voltage |
600 V - 15...10 % |
| Motor Power Hp |
60 hp 600 V normal duty
50 hp 600 V heavy duty |
| Line Current |
55.1 A 600 V normal duty)
47.1 A 600 V heavy duty) |
| Prospective Line Isc |
70 kA |
| Apparent Power |
57.3 kVA 600 V normal duty)
48.9 kVA 600 V heavy duty) |
| Continuous Output Current |
62 A 2.5 kHz normal duty
52 A 2.5 kHz heavy duty |
| Max Transient Current |
68.2 A 60 s normal duty)
78 A 60 s heavy duty) |
| Async Motor Control Profile |
Constant torque standard
Variable torque standard
Optimized torque mode |
| Sync Motor Control Profile |
Permanent magnet motor
Synchronous reluctance motor |
| Speed Drive Output Frequency |
0.1…599 Hz |
| Nominal Switching Frequency |
2.5 kHz |
| Switching Frequency |
1...4.9 kHz adjustable
2.5...4.9 kHz with derating factor |
| Safety Function |
STO (safe torque off) SIL 3 |
| Discrete Input Logic |
16 preset speeds |
| Communication Port Protocol |
Ethernet
Modbus serial
Modbus TCP |
| Option Card |
Slot A communication module, Profibus DP V1
Slot A communication module, Profinet
Slot A communication module, DeviceNet
Slot A communication module, Modbus TCP/EtherNet/IP
Slot A communication module, CANopen daisy chain RJ45
Slot A communication module, CANopen SUB-D 9
Slot A communication module, CANopen screw terminals
Slot A/slot B digital and analog I/O extension module
Slot A/slot B output relay extension module
Slot A communication module, Ethernet IP/Modbus TCP/MD-Link
communication module, BACnet MS/TP
communication module, Ethernet Powerlink |
| Output Voltage |
<= power supply voltage |
| Perm Temporary Current Boost |
1.1 x In 60 s normal duty)
1.5 x In 60 s heavy duty) |
| Motor Slip Compensation |
Can be suppressed
Automatic whatever the load
Not available in permanent magnet motor law
Adjustable |
| Accel And Decel Ramps |
Linear adjustable separately from 0.01...9999 s
S, U or customized |
| Braking To Standstill |
By DC injection |
| Protection Type |
Thermal protection motor
Safe torque off motor
Motor phase break motor
Thermal protection drive
Safe torque off drive
Overheating drive
Overcurrent between output phases and earth drive
Overload of output voltage drive
Short-circuit protection drive
Motor phase break drive
Overvoltages on the DC bus drive
Line supply overvoltage drive
Line supply undervoltage drive
Line supply phase loss drive
Overspeed drive
Break on the control circuit drive |
| Frequency Resolution |
Display unit 0.1 Hz
Analog input 0.012/50 Hz |
| Electrical Connection |
Control removable screw terminals 0.5...1.5 mm² AWG 20...AWG 16
Line side screw terminal 25...50 mm² AWG 4...AWG 1
Motor screw terminal 25...50 mm² AWG 4...AWG 1 |
| Connector Type |
RJ45 on the remote graphic terminal)Ethernet/Modbus TCP
RJ45 on the remote graphic terminal)Modbus serial |
| Physical Interface |
2-wire RS 485 Modbus serial |
| Transmission Frame |
RTU Modbus serial |
| Transmission Rate |
10/100 Mbit/s Ethernet IP/Modbus TCP
4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial |
| Exchange Mode |
Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP |
| Data Format |
8 bits, configurable odd, even or no parity Modbus serial |
| Type Of Polarization |
No impedance Modbus serial |
| Number Of Addresses |
1…247 Modbus serial |
| Method Of Access |
Slave Modbus TCP |
| Supply |
External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection
Internal supply for digital inputs and STO 24 V DC 21…27 V), <200 mA overload and short-circuit protection |
| Local Signalling |
Local diagnostic 3 LEDs
Embedded communication status 3 LEDs dual colour)
Communication module status 4 LEDs dual colour)
Presence of voltage 1 LED red) |
| Width |
13.03 in (331 mm) |
| Height |
32.36 in (822 mm) |
| Depth |
11.69 in (297 mm) |
