| Range Of Product |
Altivar 212 |
| Product Or Component Type |
Variable speed drive |
| Device Short Name |
ATV212 |
| Product Destination |
Asynchronous motors |
| Product Specific Application |
Pumps and fans in HVAC |
| Assembly Style |
With heat sink |
| Network Number Of Phases |
3 phase |
| Motor Power kW |
75 kW |
| Motor Power Hp |
100 hp |
| [Us] Rated Supply Voltage |
380...480 V - 15...10 % |
| Supply Voltage Limits |
323…528 V |
| Supply Frequency |
50...60 Hz - 5...5 % |
| Emc Filter |
Class C1 EMC filter integrated |
| Line Current |
141.8 A 380 V
111.3 A 480 V |
| Apparent Power |
105.3 kVA 380 V |
| Prospective Line Isc |
22 kA |
| Continuous Output Current |
160 A 380 V
160 A 460 V |
| Max Transient Current |
176 A 60 s |
| Speed Drive Output Frequency |
0.5…200 Hz |
| Nominal Switching Frequency |
8 kHz |
| Switching Frequency |
6...16 kHz adjustable
8...16 kHz with derating factor |
| Speed Range |
1…10 |
| Speed Accuracy |
+/- 10 % of nominal slip 0.2 Tn to Tn |
| Torque Accuracy |
+/- 15 % |
| Transient Overtorque |
120 % of nominal motor torque +/- 10 % 60 s |
| Async Motor Control Profile |
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio, 5 points
Voltage/frequency ratio - Energy Saving, quadratic U/f
Flux vector control without sensor, standard
Voltage/frequency ratio, 2 points |
| Regulation Loop |
Adjustable PI regulator |
| Motor Slip Compensation |
Adjustable
Automatic whatever the load
Not available in voltage/frequency ratio motor control |
| Local Signalling |
DC bus energized 1 LED red) |
| Output Voltage |
<= power supply voltage |
| ISOlation |
Electrical between power and control |
| Type Of Cable |
Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR
Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC
With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC |
| Electrical Connection |
VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.00 in² (2.5 mm²) / AWG 14
L1/R, L2/S, L3/T terminal 0.20 in² (130 mm²) 250 kcmil)
U/T1, V/T2, W/T3 terminal 0.23 in² (150 mm²) 300 kcmil) |
| Tightening Torque |
5.31 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
141.61 lbf.in (16 N.m), 142 lb.in L1/R, L2/S, L3/T)
362.88 lbf.in (41 N.m), 360 lb.in U/T1, V/T2, W/T3) |
| Supply |
Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 A overload and short-circuit protection
Internal supply 24 V DC 21…27 V), <200 A overload and short-circuit protection |
| Analogue Input Number |
2 |
| Analogue Input Type |
VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 10 bits
VIB configurable PTC probe 0...6 probes 1500 Ohm
VIA switch-configurable current 0...20 mA 250 Ohm 10 bits |
| Sampling Duration |
2 ms +/- 0.5 ms F discrete
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analog
22 ms +/- 0.5 ms VIB analog |
| Response Time |
FM 2 ms +/- 0.5 ms analog
FLA, FLC 7 ms +/- 0.5 ms discrete
FLB, FLC 7 ms +/- 0.5 ms discrete
RY, RC 7 ms +/- 0.5 ms discrete |
| Accuracy |
+/- 0.6 % VIA) for a temperature variation 60 °C
+/- 0.6 % VIB) for a temperature variation 60 °C
+/- 1 % FM) for a temperature variation 60 °C |
| Linearity Error |
VIA +/- 0.15 % of maximum value input
VIB +/- 0.15 % of maximum value input
FM +/- 0.2 % output |
| Analogue Output Number |
1 |
| Analogue Output Type |
FM switch-configurable voltage 0...10 V DC 7620 Ohm 10 bits
FM switch-configurable current 0...20 mA 970 Ohm 10 bits |
| Discrete Output Number |
2 |
| Discrete Output Type |
Configurable relay logic FLA, FLC) NO - 100000 cycles
Configurable relay logic FLB, FLC) NC - 100000 cycles
Configurable relay logic RY, RC) NO - 100000 cycles |
| Minimum Switching Current |
3 mA 24 V DC configurable relay logic |
| Maximum Switching Current |
5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R)
5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)
2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R)
2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R) |
| Discrete Input Type |
F programmable 24 V DC level 1 PLC 4700 Ohm
R programmable 24 V DC level 1 PLC 4700 Ohm
RES programmable 24 V DC level 1 PLC 4700 Ohm |
| Discrete Input Logic |
Positive logic (source) F, R, RES), <= 5 V, >= 11 V
Negative logic (sink) F, R, RES), >= 16 V, <= 10 V |
| Accel And Decel Ramps |
Automatic based on the load
Linear adjustable separately from 0.01 to 3200 s |
