Ultrasonic sensor cylindrical M30 – Sn 8 m – M12 connector
This cylindrical ultrasonic sensor has a ULTEM case. It has a supply voltage of 15V to 24V DC and an analog ouput of 0V to 10 V. This cylindrical ultrasonic distance sensor with analogue output, is mountable directly on a surface or bracket, thanks to its cylindrical thread and 2 fixing nuts. ULTEM® high strength case makes it ideal for high temperature environments. Multi-LED display allows to identify status of the sensor, to facilitate setup and troubleshooting. IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-20°C) and hot environments (+60°C). It has a standard M12 connector, compatible with all existing market sensor cabling. It is IEC 60947-5-2 compliant.
Brand: Telemecanique
Add to Quote CatalogueSpecifications
| Part Number | XX930A3A1M12 |
|---|---|
| Country of Origin | US |
| UPC | 785901418917 |
| UPC11 | 78590141891 |
| EAN | 3389110704143 |
| Availability | N |
| Lead Time | 3 |
| UNSPSC | 39122230 |
| ECCN | EAR99 |
| HTs Code | 9031808085 |
| Prop 65 | This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov |
| RoHS Compliant | Yes |
| Discount Schedule | DS2 |
| Return Indicator | Yes |
| Depth | 4.65 inch |
| Height | 1.73 inch |
| Width | 1.73 inch |
| Weight | 0.25 pound |
Characteristics
| Range Of Product | OsiSense XX |
|---|---|
| Sensor Type | Ultrasonic sensor |
| Series Name | General purpose |
| Sensor Name | XX9 |
| Sensor Design | Cylindrical M30 |
| Detection System | Diffuse |
| Sn Nominal Sensing Distance | 26.25 ft (8 m) adjustable with teach push-button |
| Material | Plastic |
| Type Of Output Signal | Analogue |
| Wiring Techniquees | 4-wire |
| Analogue Output Function | 0...10 V |
| [Us] Rated Supply Voltage | 15...24 V DC reverse polarity protection |
| Electrical Connection | Male connector M12 4 pins |
| Sd Sensing Range | 0.98…26.25 ft (0.3…8 m) |
| Beam Angle | 16 ° |
| IP Degree Of Protection | IP67 IEC 60529 |
| Enclosure Material | ULTEM |
| Front Material | Epoxy |
| Thread Type | M30 x 1.5 |
| Supply Voltage Limits | 14…28 V DC |
| Function Available | Without synchronisation mode |
| Sa Assured Operating Distance | 0.98…26.25 ft (0.3…8 m) teach mode) |
| Blind Zone | 0.00…11.81 in (0…300 mm) |
| Transmission Frequency | 75 kHz |
| Repeat Accuracy | 2.54 % |
| Deviation Angle From 90° | -5…5 ° |
| Min Size Of Detected Object | Cylinder diameter 50.68 mm 15.52 ft (4.732 m) |
| Status Led | Setting-up assistance 1 LED dual colour) Supply on 1 LED green) Output state 1 LED yellow) |
| Current Consumption | 60 mA |
| Maximum Switching Capacity | >= 1 kOhm overload and short-circuit protection |
| Setting-Up | Slope selection using teach button |
| Delay First Up | 1200 ms |
| Delay Response | 250 ms |
| Delay Recovery | 250 ms |
| Marking | CE |
| Threaded Length | 2.53 in (64.3 mm) |
| Height | 1.73 in (44 mm) |
| Width | 1.73 in (44 mm) |
| Depth | 4.65 in (118 mm) |
| Product Weight | 0.25 lb(US) (0.115 kg) |
| Standards | IEC 60947-5-2 |
| Product Certifications | CCSAus UL |
| Ambient Air Temp For Op | -4…140 °F (-20…60 °C) |
| Ambient Air Temp For Storage | -40…176 °F (-40…80 °C) |
| Vibration Resistance | +/-1 mm 10…55 Hz)IEC 60068-2-6 |
| Shock Resistance | 30 gn in all 3 axes 11 ms IEC 60068-2-27 |
| Resist Electrostatic Dischrg | 8 kV level 4 IEC 61000-4-2 |
| Resist To Electromagn Fields | 9.14 V/m (10 V/m) level 3 IEC 61000-4-3 |
| Resistance To Fast Transients | 1 kV level 3 IEC 61000-4-4 |
| Category | 22490 - SENSORS-ULTRASONIC (XX5,6) |
Documents
- Catalog (DIA4ED2191101EN)
- End Of Life Manual (ENVEOLI111225EN)
- Declaration Of Conformity (EUDoC_NVE7094400)
- CAD dxf (XX630A3NCM12model_CAD2D-MECHANICAL_front)
- CAD dwf (XX630A3NCM12model_CAD2D-MECHANICAL_side)
- CAD wmf (XX630A3NCM12model_CAD2D-MECHANICAL_front)
- CAD dxf (XX630A3NCM12model_CAD2D-MECHANICAL_side)
- CAD wmf (XX630A3NCM12model_CAD2D-MECHANICAL_side)
- CAD dwg (XX630A3NCM12model_CAD2D-MECHANICAL_front)
