Ultrasonic sensor cylindrical M30 – Sn 2 m – NC+NO – PNP – M12 connector
This product is part of the XX range, an offer of ultrasonic sensors. This general purpose ultrasonic sensor has a cylindrical M30 design. It has diffuse detection system. It supports 2m adjustable with teach push-button nominal sensing distance and 1 normally closed + 1 normally opened PNP discrete output. It is furnished with 4-pin M12 male connector for electrical connection and 1 LED for setting-up assistance. It is an ultrasonic sensor with a rated supply voltage of 12V to 24V DC with reverse polarity protection, a current consumption of 100mA and a transmission frequency of 200kHz. It is an IP67 rated product. The enclosure is made of ULTEM with silicone front. Its dimensions are 35mm (Width) x 85mm (Depth) x 35mm (Height) and weighs 0.091kg. This product is certified by UL and CCSAus. It meets IEC 60947-5-2 standards. These ultrasonic sensors are ideal for detection of any material, irrespective of colour, light ambiance at the same distance, without adjustment or correction factor. Ex Osisonic, OsiSense XX ultrasonic sensors enable detection, without contact, of any object irrespective of its material (metal, plastic, wood, cardboard, etc.), nature (solid, liquid, powder, etc.), colour.
Brand: Telemecanique
Add to Quote CatalogueSpecifications
| Part Number | XX630A2PCM12 |
|---|---|
| Country of Origin | US |
| UPC | 389119129558 |
| UPC11 | 38911912955 |
| EAN | 3389119129558 |
| Availability | N |
| Lead Time | 3 |
| UNSPSC | 39122230 |
| ECCN | EAR99 |
| HTs Code | 8536509065 |
| Prop 65 | This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov |
| RoHS Compliant | Yes |
| Discount Schedule | DS2 |
| Return Indicator | Yes |
| Depth | 3.35 inch |
| Height | 1.38 inch |
| Width | 1.38 inch |
| Weight | 0.20 pound |
Characteristics
| Range Of Product | OsiSense XX |
|---|---|
| Sensor Type | Ultrasonic sensor |
| Series Name | General purpose |
| Sensor Name | XX6 |
| Sensor Design | Cylindrical M30 |
| Detection System | Diffuse |
| Sn Nominal Sensing Distance | 6.56 ft (2 m) adjustable with teach push-button |
| Material | Plastic |
| Type Of Output Signal | Discrete |
| Discrete Output Function | 1 NC + 1 NO |
| Wiring Techniquees | 4-wire |
| Discrete Output Type | PNP |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Electrical Connection | Male connector M12 4 pins |
| Sd Sensing Range | 0.39…6.56 ft (0.12…2 m) |
| Beam Angle | 10 ° |
| IP Degree Of Protection | IP67 IEC 60529 |
| Enclosure Material | ULTEM |
| Front Material | Silicone |
| Thread Type | M30 x 1.5 |
| Supply Voltage Limits | 10…28 V DC |
| Function Available | Without synchronisation mode |
| Sa Assured Operating Distance | 0.39…6.56 ft (0.12…2 m) teach mode) |
| Maximum Differential Travel | 0.10 in (2.5 mm) |
| Blind Zone | 0.00…4.72 in (0…120 mm) |
| Transmission Frequency | 200 kHz |
| Repeat Accuracy | 0.9 % |
| Deviation Angle From 90° | -7…7 ° |
| Min Size Of Detected Object | Cylinder diameter 1.6 mm 2.08 ft (0.635 m) |
| Status Led | Setting-up assistance 1 LED green/red (flashing)) |
| Current Consumption | 100 mA |
| Maximum Switching Current | 100 mA overload and short-circuit protection |
| Voltage Drop | 1 V |
| Switching Frequency | <= 16 Hz |
| Delay First Up | 720 ms |
| Delay Response | 25 ms |
| Delay Recovery | 20 ms |
| Marking | CE |
| Threaded Length | 1.77 in (45 mm) |
| Height | 1.38 in (35 mm) |
| Width | 1.38 in (35 mm) |
| Depth | 3.35 in (85 mm) |
| Product Weight | 0.20 lb(US) (0.091 kg) |
| Standards | IEC 60947-5-2 |
| Product Certifications | UL CCSAus |
| Ambient Air Temp For Op | 32…140 °F (0…60 °C) |
| Ambient Air Temp For Storage | -40…176 °F (-40…80 °C) |
| Vibration Resistance | +/-1 mm 10…55 Hz)IEC 60068-2-6 |
| Shock Resistance | 30 gn in all 3 axes 11 ms IEC 60068-2-27 |
| Resist Electrostatic Dischrg | 8 kV level 4 IEC 61000-4-2 |
