XX512A2PAM8
Ultrasonic sensor cylindrical M12 – Sn 0.1 m – NO – M8 connector
This cylindrical (diffuse system) ultrasonic sensor has a ULTEM case. It has a supply voltage of 12V to 24V DC. This general purpose cylindrical ultrasonic sensor, is mountable directly on a surface or bracket, thanks to its outer thread and twin nuts. ULTEM® high strength case makes it ideal for high temperature environments. 2 LED display allows to identify status of the sensor, to facilitate setup and troubleshooting. IP67 protection makes this product ready for the harshest environments. It can operate in very cold (-20°C) and hot environments (+65°C). It is IEC 60947-5-2 compliant.
Brand: Telemecanique
Add to Quote CatalogueSpecifications
| Part Number | XX512A2PAM8 |
|---|---|
| Country of Origin | US |
| UPC | 785901420736 |
| UPC11 | 78590142073 |
| EAN | 3389110704044 |
| Availability | N |
| Lead Time | 3 |
| UNSPSC | 39122230 |
| HTs Code | 8536507000 |
| Prop 65 | This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov |
| RoHS Compliant | Yes |
| Discount Schedule | DS2 |
| Return Indicator | Yes |
| Depth | 1.97 inch |
| Height | 0.47 inch |
| Width | 0.47 inch |
| Weight | 0.02 pound |
Characteristics
| Range Of Product | OsiSense XX |
|---|---|
| Sensor Type | Ultrasonic sensor |
| Series Name | General purpose |
| Sensor Name | XX5 |
| Sensor Design | Cylindrical M12 |
| Detection System | Diffuse |
| Sn Nominal Sensing Distance | 0.33 ft (0.1 m) fixed |
| Material | Plastic |
| Type Of Output Signal | Discrete |
| Discrete Output Function | 1 NO |
| Wiring Techniquees | 3-wire |
| Discrete Output Type | PNP |
| [Us] Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Electrical Connection | Male connector M8 3 pins |
| Sd Sensing Range | 0.02…0.33 ft (0.0064…0.102 m) |
| Beam Angle | 10 ° |
| IP Degree Of Protection | IP67 IEC 60529 |
| Enclosure Material | ULTEM |
| Front Material | Epoxy |
| Thread Type | M12 x 1 |
| Supply Voltage Limits | 10…28 V DC |
| Sa Assured Operating Distance | 0.02…0.33 ft (0.0064…0.102 m) |
| Maximum Differential Travel | 0.03 in (0.7 mm) |
| Blind Zone | 0.00…0.25 in (0…6.4 mm) |
| Transmission Frequency | 500 kHz |
| Repeat Accuracy | 0.7 % |
| Deviation Angle From 90° | -10…10 ° |
| Min Size Of Detected Object | Cylinder diameter 2.5 mm Flat bar 1 mm wide |
| Status Led | Supply on 1 LED green) Output state 1 LED yellow) |
| Current Consumption | 25 mA |
| Maximum Switching Current | 100 mA overload and short-circuit protection |
| Voltage Drop | 1 V |
| Switching Frequency | <= 125 Hz |
| Delay First Up | 20 ms |
| Delay Response | 3 ms |
| Delay Recovery | 3 ms |
| Marking | CE |
| Threaded Length | 1.50 in (38 mm) |
| Height | 0.47 in (12 mm) |
| Width | 0.47 in (12 mm) |
| Depth | 1.97 in (50 mm) |
| Product Weight | 0.02 lb(US) (0.011 kg) |
| Standards | IEC 60947-5-2 |
| Product Certifications | UL |
| Ambient Air Temp For Op | -4…149 °F (-20…65 °C) |
| Ambient Air Temp For Storage | -40…176 °F (-40…80 °C) |
| Vibration Resistance | +/-1 mm 10…55 Hz)IEC 60068-2-6 |
| Shock Resistance | 30 gn in all 3 axes 11 ms IEC 60068-2-27 |
| Resist Electrostatic Dischrg | 8 kV level 4 IEC 61000-4-2 |
| Resist To Electromagn Fields | 9.14 V/m (10 V/m) level 3 IEC 61000-4-3 |
Documents
- Product Datasheet (pdf)
- Catalog (DIA4ED2191101EN)
- End Of Life Manual (ENVEOLI111225EN)
- Product Environmental (ENVPEP111234EN)
- CAD dwf (XX512AxxAM8_CAD2D-MECHANICAL_side)
- CAD wmf (XX512AxxAM8_CAD2D-MECHANICAL_front)
- CAD dxf (XX512AxxAM8_CAD2D-MECHANICAL_side)
- CAD dwf (XX512AxxAM8_CAD2D-MECHANICAL_front)
- CAD wmf (XX512AxxAM8_CAD2D-MECHANICAL_side)
