| Range |
TeSys |
| Product Name |
TeSys F |
| Product Or Component Type |
Contactor |
| Device Short Name |
LC1F |
| Contactor Application |
Resistive load
Motor control |
| Utilisation Category |
AC-4
AC-1
AC-3 |
| Poles Description |
3P |
| Power Pole Contact Composition |
3 NO |
| Ue Rated Operational Voltage |
<= 460 V DC
<= 690 V AC 50/60 Hz |
| Ie Rated Operational Current |
275 A 104 °F (40 °C)) <= 440 V AC-1
185 A 131 °F (55 °C)) <= 440 V AC-3 |
| Motor Power kW |
90 kW 380...400 V AC 50/60 Hz AC-3)
100 kW 415 V AC 50/60 Hz AC-3)
100 kW 440 V AC 50/60 Hz AC-3)
110 kW 500 V AC 50/60 Hz AC-3)
110 kW 660...690 V AC 50/60 Hz AC-3)
55 kW 220...230 V AC 50/60 Hz AC-3)
33 kW 400 V AC 50/60 Hz AC-4) |
| Uc Control Circuit Voltage |
240 V AC 40...400 Hz |
| Uimp Rated Imp Wstd Voltage |
8 kV |
| Overvoltage Category |
III |
| Ith Cnvtl Free Air Therm Crrt |
275 A 104 °F (40 °C) |
| Rated Breaking Capacity |
1480 A IEC 60947-4-1 |
| Icw Rated Short-Time Wstd Crrt |
1500 A 104 °F (40 °C) - 10 s
920 A 104 °F (40 °C) - 30 s
740 A 104 °F (40 °C) - 1 min
500 A 104 °F (40 °C) - 3 min
400 A 104 °F (40 °C) - 10 min |
| Associated Fuse Rating |
200 A aM <= 440 V
315 A gG <= 440 V |
| Average Impedance |
0.33 mOhm - Ith 275 A 50 Hz |
| Ui Rated Insulation Voltage |
1000 V IEC 60947-4-1
1500 V VDE 0110 group C |
| Power Dissipation Per Pole |
12 W AC-3
25 W AC-1 |
| Mounting Support |
Plate |
| Standards |
IEC 60947-1
JIS C8201-4-1
EN 60947-1
IEC 60947-4-1
EN 60947-4-1 |
| Product Certifications |
LROS (Lloyds register of shipping)
UL
CSA
BV
CB
DNV
RMRoS
RINA
ABS |
| Connections - Terminals |
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible with cable end
Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end
Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)solid without cable end
Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)solid without cable end
Power circuit bar 2 25 x 3 mm
Power circuit lugs-ring terminals 1 0.23 in² (150 mm²)
Power circuit connector 1 0.23 in² (150 mm²)
Power circuit bolted connection |
| Tightening Torque |
Control circuit 10.62 lbf.in (1.2 N.m)
Power circuit 159.31 lbf.in (18 N.m) |
| Ctrl Circuit Voltage Limits |
Operational 0.85...1.1 Uc 40...400 Hz 131 °F (55 °C))
Drop-out 0.35...0.55 Uc 40...400 Hz 131 °F (55 °C)) |
| Inrush Power In VA |
1070 VA 40...400 Hz 0.9 68 °F (20 °C)) |
| Hold-In Power Consumption Va |
9.9 VA 40...400 Hz 0.9 68 °F (20 °C)) |
| Heat Dissipation |
8…9.8 W |
| Operating Time |
35 ms closing at Uc)
130 ms opening at Uc) |
| Mechanical Durability |
10 Mcycles |
| Operating Rate |
2400 cyc/h 131 °F (55 °C) |
| Compatibility Code |
LC1F |
| Motor Power Range |
30…50 kW 200…240 V 3 phase
55…100 kW 200…240 V 3 phase
55…100 kW 380…440 V 3 phase
55…100 kW 480…500 V 3 phase
110…220 kW 480…500 V 3 phase |
| Motor Starter Type |
Direct on-line contactor |
| Contactor Coil Voltage |
240 V AC standard |
| IP Degree Of Protection |
IP2x front face with shrouds IEC 60529
IP2x front face with shrouds VDE 0106 |
| Protective Treatment |
TH |
| Ambient Air Temp For Op |
23…131 °F (-5…55 °C) |
| Ambient Air Temp For Storage |
-76…176 °F (-60…80 °C) |
| Ambient Air Temp Around Device |
-40…158 °F (-40…70 °C) |
| Operating Altitude |
9842.52 ft (3000 m) without derating |
| Height |
6.85 in (174 mm) |
| Width |
6.63 in (168.5 mm) |
| Depth |
7.13 in (181 mm) |
| Product Weight |
10.25 lb(US) (4.65 kg) |
| Category |
22336 - CTR,F-LINE,AC,OPEN,NONREV |
| Discount Schedule |
I12 |
| GTIN |
00785901468622 |
