| Range |
TeSys |
| Product Name |
TeSys D |
| Product Or Component Type |
Contactor |
| Device Short Name |
LC1D |
| Contactor Application |
Resistive load |
| Utilisation Category |
AC-1 |
| Poles Description |
4P |
| Power Pole Contact Composition |
4 NO |
| Ue Rated Operational Voltage |
Power circuit <= 690 V AC 25...400 Hz
Power circuit <= 300 V DC |
| Ie Rated Operational Current |
60 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit |
| Control Circuit Type |
DC standard |
| Uc Control Circuit Voltage |
250 V DC |
| Auxiliary Contact Composition |
1 NO + 1 NC |
| Uimp Rated Imp Wstd Voltage |
6 kV IEC 60947 |
| Overvoltage Category |
III |
| Ith Cnvtl Free Air Therm Crrt |
10 A 140 °F (60 °C) signalling circuit
60 A 140 °F (60 °C) power circuit |
| Irms Rated Making Capacity |
140 A AC signalling circuit IEC 60947-5-1
250 A DC signalling circuit IEC 60947-5-1
800 A 440 V power circuit IEC 60947 |
| Rated Breaking Capacity |
800 A 440 V power circuit IEC 60947 |
| Icw Rated Short-Time Wstd Crrt |
320 A 104 °F (40 °C) - 10 s power circuit
720 A 104 °F (40 °C) - 1 s power circuit
72 A 104 °F (40 °C) - 10 min power circuit
165 A 104 °F (40 °C) - 1 min power circuit
100 A - 1 s signalling circuit
120 A - 500 ms signalling circuit
140 A - 100 ms signalling circuit |
| Associated Fuse Rating |
10 A gG signalling circuit IEC 60947-5-1
80 A gG <= 690 V type 1 power circuit
80 A gG <= 690 V type 2 power circuit |
| Average Impedance |
1.6 mOhm - Ith 60 A 50 Hz power circuit |
| Ui Rated Insulation Voltage |
Power circuit 600 V CSA
Power circuit 600 V UL
Signalling circuit 690 V IEC 60947-1
Signalling circuit 600 V CSA
Signalling circuit 600 V UL
Power circuit 690 V IEC 60947-4-1 |
| Electrical Durability |
0.7 Mcycles 60 A AC-1 <= 440 V |
| Power Dissipation Per Pole |
5.8 W AC-1 |
| Front Cover |
With |
| Mounting Support |
Rail
Plate |
| Standards |
CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508 |
| Product Certifications |
GL
LROS (Lloyds register of shipping)
BV
CSA
CCC
DNV
UL
GOST
RINA |
| Connections - Terminals |
Control circuit lugs-ring terminals 0.31 in (8 mm))
Power circuit lugs-ring terminals 0.65 in (16.5 mm)) |
| Tightening Torque |
Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals flat Ø 6 mm M3.5
Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals Philips No 2 M3.5
Power circuit 53.10 lbf.in (6 N.m) lugs-ring terminals M6 |
| Operating Time |
42.5...57.5 ms closing
16...24 ms opening |
| Safety Reliability Level |
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1 |
| Mechanical Durability |
10 Mcycles |
| Operating Rate |
3600 cyc/h 140 °F (60 °C) |
| Coil Technology |
Built-in bidirectional peak limiting diode suppressor |
| Ctrl Circuit Voltage Limits |
0.1...0.3 Uc -40…158 °F (-40…70 °C) drop-out DC
0.75...1.25 Uc -40…140 °F (-40…60 °C) operational DC
1...1.25 Uc 140…158 °F (60…70 °C) operational DC |
| Time Constant |
34 ms |
| Inrush Power In W |
19 W 68 °F (20 °C)) |
| Hold-In Power Consumption W |
7.4 W 68 °F (20 °C) |
| Auxiliary Contacts Type |
Mechanically linked 1 NO + 1 NC IEC 60947-5-1
Mirror contact 1 NC IEC 60947-4-1 |
| Signalling Circuit Frequency |
25...400 Hz |
| Minimum Switching Current |
5 mA signalling circuit |
| Minimum Switching Voltage |
17 V signalling circuit |
| Non-Overlap Time |
1.5 ms on de-energisation between NC and NO contact
1.5 ms on energisation between NC and NO contact |
| Insulation Resistance |
> 10 MOhm signalling circuit |
| Contact Compatibility |
M7 |
| Compatibility Code |
LC1D |
| IP Degree Of Protection |
IP20 front face IEC 60529 |
| Protective Treatment |
TH IEC 60068-2-30 |
| Pollution Degree |
3 |
