| Range Of Product |
Harmony Relay |
| Product Or Component Type |
Solid state relay |
| Provided Accessory |
Thermal pad |
| Device Short Name |
SSP1 |
| Mounting Support |
Panel |
| Number Of Phases |
1 phase |
| Contacts Type And Conifguration |
1 NO |
| In Rated Current |
125 A |
| Solid State Output Type |
SCR output
Zero voltage switching |
| Uc Control Circuit Voltage |
4...32 V DC |
| Minimum Switching Voltage |
4 V DC turn-on |
| Maximum Switching Voltage |
1 V DC turn-off |
| Response Time |
0.5 cycle turn-on)
0.5 cycle turn-off) |
| Input Current |
7…12 mA |
| Output Voltage |
48...660 V AC |
| Load Current |
0.15…125 A |
| Transient Overvoltage |
1200 V |
| Surge Current |
1750 A 16.6 ms |
| Maximum I²T For Fusing |
12709 A².s 8.33 ms 60 Hz
13950 A².s 10 ms 50 Hz |
| Co-Ordination Type |
Type 1 - 80 A miniature circuit breaker (MCB) B
Type 2 - 63 A miniature circuit breaker (MCB) B |
| Leakage Current |
1 mA off-state |
| Voltage Drop |
<1.15 V on-state |
| Dv/Dt |
500 V/µs off-state at maximum voltage |
| Power Factor |
0.5 with maximum load) |
| Motor Controller Rating |
2 hp 120 V AC
5 hp 240 V AC
10 hp 480 V AC |
| Insulation Resistance |
1000 MOhm 500 V DC |
| Maximum Capacitance |
8 pF input/output |
| Dielectric Strength |
4 kV AC input/output
4 kV AC input or output to case |
| Uimp Rated Imp Wstd Voltage |
6 kV output to case
6 kV input to output |
| Tightening Torque |
1.5...1.7 N.m input
2...2.2 N.m output
17.7...19.47 lb.in output
13.27...15.04 lb.in input
0.5...0.6 N.m auxillary terminal
4.4...5.3 lb.in auxillary terminal |
| Connections - Terminals |
Screw terminals 0.2...3.3 mm², AWG 24...AWG 12) with cable end input
Screw terminals 0.5...5.26 mm², AWG 20...AWG 10) with cable end output
Screw terminals 0.2...3.3 mm², AWG 24...AWG 12) without cable end input
Screw terminals 0.5...8.26 mm², AWG 20...AWG 8) without cable end output
Forked type tag connectors 9.2 x 4 mm input
Ring lugs 9.2 x 4 mm input
Forked type tag connectors 11.7 x 4.5 mm output
Ring lugs 11.7 x 4.5 mm output |
| Auxiliary/Alarm Connection Terminal |
Screw-type connector, 0.5...1.5 mm² AWG 20...AWG 16)slotted Philips |
| Thermal Resistance |
0.22 °C/W junction to case |
| Led Indicator |
LED, steady, green ON status control input/test button actuated
LED, steady, amber ON status load
LED, flashing, amber control input to energise load
LED, steady, red open-circuit control input
LED, flashing, red load cut-off/short-circuit |
| Maximum Alarm Output Current |
30 mA 32 V DC |
| Minimum Load Current |
150 mA |
| IP Degree Of Protection |
IP20 |
| Electromagnetic Compatibility |
Electrostatic discharge 6 kV criteria A contact discharge IEC 61000-4-2
Electrostatic discharge 8 kV criteria A air discharge IEC 61000-4-2
Radiated radio-frequency electromagnetic field immunity test criteria A output ports IEC 61000-4-3
Radiated radio-frequency electromagnetic field immunity test criteria B alarm port IEC 61000-4-3
Electrical fast transient/burst immunity test 1 kV, 5/100 kHz criteria B output ports IEC 61000-4-4
Surge immunity test 1 kV criteria A output ports line to line IEC 61000-4-5
Surge immunity test 2 kV criteria A output ports line to earth IEC 61000-4-5 |
| Safety Reliability Data |
MTTFd = 1875.9 years
B10d = 1731395 |
| Product Weight |
3.43 oz (97.1 g) |
| Device Presentation |
Complete product |
| Ambient Air Temp For Op |
-40…176 °F (-40…80 °C) |
| Ambient Air Temp For Storage |
-40…257 °F (-40…125 °C) |
| Pollution Degree |
2 |
| Overvoltage Category |
III |
| Product Certifications |
RoHS
CE
EAC
UL
REACH
CSA |
| Marking |
CE
EAC
CSA
UL |
| Standards |
CSA C22.2 No 14-13
EN/IEC 62314
UL 508
EN/IEC 60950-1 |
| GTIN |
03606485442273 |
| EU RoHs Directive |
Pro-active compliance (Product out of EU RoHS legal scope) |
