The Altistart U01 is a soft start/soft stop unit for 3-phase asynchronous motors. It is designed primarily for combinations with TeSys U starter-controllers. It can be used for a motor rated power up to 20hp for 3-phase (200V to 480V AC) and up to 32A rating. It is 45mm wide, this makes it one of the smallest soft starters on the market. It can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Its protection index is IP20. It weighs 0.49kg and its dimensions are, 45mm wide, 314mm high, 170mm deep. The Altistart U01 is designed for the following simple applications like conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It complies with standards IEC/EN 60947-4-2, and carries UL, CSA, C-Tick, and CCC certifications, and CE marking. It can be easily combined with a TeSys U controller by means of the power connector VW3G4104. It is easy to install on a DIN rail. Altistart 01 combines simplicity with easy cabling, fast configuration and efficiency. Reduced machine wear and minimized maintenance time will optimize operations. Together with TeSys Model U, it provides a unique motor starter solution.
Brand: Telemecanique
Add to Quote CataloguePart Number | ATSU01N232LT |
---|---|
Country of Origin | DE |
UPC | 785901575849 |
UPC11 | 78590157584 |
EAN | 3389110667127 |
Availability | S |
Lead Time | 33 |
UNSPSC | 39121521 |
ECCN | EAR99 |
HTs Code | 8504404000 |
Prop 65 | This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov |
RoHS Compliant | Yes |
Discount Schedule | I11 |
Return Indicator | Yes |
Depth | 6.69 inch |
Height | 12.36 inch |
Width | 1.77 inch |
Weight | 1.08 pound |
Range Of Product | Altistart U01 and TeSys U |
---|---|
Product Or Component Type | Soft starter |
Product Destination | Asynchronous motors |
Product Specific Application | Simple machine |
Device Short Name | ATSU01 |
Network Number Of Phases | 3 phase |
[Us] Rated Supply Voltage | 200...480 V - 10...10 % |
Motor Power kW | 15 kW, 3 phase 400 V 7.5 kW, 3 phase 230 V |
Motor Power Hp | 10 hp, 3 phase 230 V 20 hp, 3 phase 460 V |
Icl Starter Rating | 32 A |
Utilisation Category | AC-53B EN/IEC 60947-4-2 |
Current Consumption | 100 mA |
Type Of Start | Start with voltage ramp |
Power Dissipation In W | 2.5 W at full load and at end of starting 322.5 W in transient state |
Assembly Style | With heat sink |
Function Available | Integrated bypass |
Supply Voltage Limits | 180…528 V |
Supply Frequency | 50...60 Hz - 5...5 % |
Network Frequency | 47.5...63 Hz |
Output Voltage | <= power supply voltage |
Uc Control Circuit Voltage | 24 V DC +/- 10 % |
Starting Time | Adjustable from 1 to 10 s 1 s / 50 10 s / 5 5 s / 10 |
Deceleration Time Symb | Adjustable from 1 to 10 s |
Starting Torque | 30...80 % of starting torque of motor connected directly on the line supply |
Discrete Input Type | Logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm |
Discrete Input Voltage | 24...40 V |
Input Output ISOlation | Galvanic between power and control |
Discrete Input Logic | Positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA |
Discrete Output Current | 2 A DC-13 3 A AC-15 |
Discrete Output Type | Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO |
Discrete Output Voltage | 24 V 6...30 V) open collector logic |
Minimum Switching Current | 10 mA 6 V DC relay outputs |
Maximum Switching Current | Relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive Relay outputs 2 A 250 V AC AC-15 cos phi = 0.5 20 ms inductive |
Maximum Switching Voltage | 440 V relay outputs |
Display Type | 1 LED Green)starter powered up 1 LED Yellow)nominal voltage reached |
Tightening Torque | 16.82…22.13 lbf.in (1.9…2.5 N.m) 4.43 lbf.in (0.5 N.m) |
Electrical Connection | 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit |
Marking | CE |
Operating Position | Vertical +/- 10 degree |
Height | 12.36 in (314 mm) |
Width | 1.77 in (45 mm) |
Depth | 6.69 in (170 mm) |
Product Weight | 1.08 lb(US) (0.49 kg) |
Motor Power Range Ac-3 | 7…11 kW 200…240 V 3 phase 15…25 kW 380…440 V 3 phase |
Motor Starter Type | Soft starter |
Electromagnetic Compatibility | Conducted and radiated emissions level B CISPR 11 Conducted and radiated emissions level B IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 EMC immunity EN 50082-1 EMC immunity EN 50082-2 Harmonics IEC 1000-3-2 Harmonics IEC 1000-3-4 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5 Conducted and radiated emissions level 3 IEC 61000-4-6 Immunity to conducted interference caused by radio-electrical fields IEC 61000-4-11 |
Standards | EN/IEC 60947-4-2 |
Product Certifications | UL CCC CSA C-tick |
IP Degree Of Protection | IP20 |
Pollution Degree | 2 EN/IEC 60947-4-2 |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366