Electrical distributor of high quality products to the LA and Orange County markets

Call Us Today To get a Quote
Soft starter for asynchronous motor – ATS01 – 9 A – 460..480 V
ATS01N209RT
Soft starter for asynchronous motor – ATS01 – 9 A – 460..480 V

This Altistart 01 soft starter is DIN rail mounted and can feed 3-phase asynchronous motors with a rating up to 9A. This Altistart 01 can be used for a motor rated power up to 1.5kW or 2hp for 3-phase (200V to 240V AC). This DIN rail mounted soft starter is designed to enable smooth start for simple machines such as conveyors, conveyor belts, pumps, fans, compressors, automatic doors and gates, small cranes and belt-driven machinery. It is 45mm wide, this makes it one of the smallest soft starters on the market; it can be installed nearly everywhere. It features an Integrated bypass, this reduces noise and decreases heat dissipation. Simple setup with only 2 settings: possible to configure by non-specialists. It provides smooth starting for your machinery, avoiding mechanical stresses and extending their service life.

Brand: Telemecanique

Add to Quote Catalogue
Specifications
Part Number ATS01N209RT
Country of Origin DE
UPC 785901875871
UPC11 78590187587
EAN 3389110667240
Availability S
Lead Time 33
UNSPSC 39121521
ECCN EAR99
HTs Code 8504404000
Prop 65 This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov
RoHS Compliant Yes
Discount Schedule I11
Return Indicator Yes
Depth 5.16 inch
Height 4.88 inch
Width 1.77 inch
Weight 0.93 pound
Characteristics
Range Of Product Altistart 01
Product Or Component Type Soft starter
Product Destination Asynchronous motors
Product Specific Application Simple machine
Device Short Name ATS01
Network Number Of Phases 3 phase
[Us] Rated Supply Voltage 460...480 V - 10...10 %
Motor Power Hp 5 hp, 3 phase 460...480 V
Icl Starter Rating 9 A
Utilisation Category AC-53B EN/IEC 60947-4-2
Current Consumption 45 A at nominal load
Type Of Start Start with voltage ramp
Power Dissipation In W 4 W at full load and at end of starting 94 W in transient state
Assembly Style With heat sink
Function Available Integrated bypass
Supply Voltage Limits 414…528 V
Supply Frequency 50...60 Hz - 5...5 %
Network Frequency 47.5...63 Hz
Output Voltage <= power supply voltage
Uc Control Circuit Voltage Built into the starter
Starting Time 1 s / 100 5 s / 20 10 s / 10 Adjustable from 1 to 10 s
Deceleration Time Symb Adjustable from 1 to 10 s
Starting Torque 30...80 % of starting torque of motor connected directly on the line supply
Discrete Input Type Logic LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete Input Voltage 24...40 V
Discrete Input Logic Positive LI1, LI2, BOOST < 5 V <= 0.2 mA > 13 V, >= 0.5 mA
Discrete Output Current 2 A DC-13 3 A AC-15
Discrete Output Type Open collector logic LO1 end of starting signal Relay outputs R1A, R1C NO
Discrete Output Voltage 24 V 6...30 V) open collector logic
Minimum Switching Current 10 mA 6 V DC relay outputs
Maximum Switching Current Relay outputs 2 A 250 V AC cos phi = 0.5 20 ms inductive Relay outputs 2 A 30 V DC cos phi = 0.5 20 ms inductive
Display Type 1 LED Green)starter powered up 1 LED Yellow)nominal voltage reached
Tightening Torque 16.82…22.13 lbf.in (1.9…2.5 N.m) 4.43 lbf.in (0.5 N.m)
Electrical Connection 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit 4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit 4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit 4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Marking CE
Operating Position Vertical +/- 10 degree
Height 4.88 in (124 mm)
Width 1.77 in (45 mm)
Depth 5.16 in (131 mm)
Product Weight 0.93 lb(US) (0.42 kg)
Compatibility Code ATS01N2
Electromagnetic Compatibility Conducted and radiated emissions level B CISPR 11 Conducted and radiated emissions level B IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 EMC immunity EN 50082-1 EMC immunity EN 50082-2 Harmonics IEC 1000-3-2 Harmonics IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Micro-cuts and voltage fluctuation IEC 61000-4-11 Voltage/current impulse level 3 IEC 61000-4-5
Standards EN/IEC 60947-4-2
Product Certifications CCC B44.1-96/ASME A17.5 for starter wired to the motor delta terminal GOST CSA UL C-tick
IP Degree Of Protection IP20
Pollution Degree 2 EN/IEC 60947-4-2
Vibration Resistance 1 gn 13…150 Hz)EN/IEC 60068-2-6 1.5 mm peak to peak 3…13 Hz)EN/IEC 60068-2-6
Shock Resistance 15 gn 11 ms EN/IEC 60068-2-27
Relative Humidity 5…95 % without condensation or dripping water EN/IEC 60068-2-3
Ambient Air Temp For Op 14…104 °F (-10…40 °C) without derating) 104…122 °F (40…50 °C) with current derating of 2 % per °C)
Documents
Royal Wholesale Electric

5.0

Powered by

Based on 2 User Reviews