SH31001M01A1000
Servo motor SH3 100 3,3Nm,nokey,single,nobrake,str.conn,IP54/IP65,6k RPM
Specifications
| Part Number | SH31001M01A1000 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 9.48 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....M |
| Maximum Mechanical Speed | 6000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 1.8 A |
| Continuous Stall Torque | 29.21 lbf.in (3.3 N.m) 115...480 V three phase |
| Peak Stall Torque | 84.97 lbf.in (9.6 N.m) 115...480 V three phase |
| Nominal Output Power | 210 W 115 V three phase 410 W 230 V three phase 790 W 400 V three phase 930 W 480 V three phase |
| Nominal Torque | 28.32 lbf.in (3.2 N.m) 115 V three phase 27.88 lbf.in (3.15 N.m) 230 V three phase 26.55 lbf.in (3 N.m) 400 V three phase 26.11 lbf.in (2.95 N.m) 480 V three phase |
| Nominal Speed | 625 rpm 115 V three phase 1250 rpm 230 V three phase 2500 rpm 400 V three phase 3000 rpm 480 V three phase |
| Maximum Current Irms | 6.3 A |
| Shaft End | Smooth shaft |
| Shaft Diameter | 0.75 in (19 mm) |
| Shaft Length | 1.57 in (40 mm) |
| Key Width | 0.24 in (6 mm) |
| IP Degree Of Protection | Shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 |
| Encoder Type | Absolute single turn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | Without |
| Mounting Support | International standard flange |
| Motor Flange Size | 3.94 in (100 mm) |
| Torque Constant | 1.83 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 115 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 4 |
| Rotor Inertia | 1.4 kg.cm² |
| Stator Resistance | 13.9 Ohm |
| Stator Inductance | 99.15 mH |
| Maximum Radial Force Fr | 900 N 1000 rpm 720 N 2000 rpm 630 N 3000 rpm 570 N 4000 rpm 530 N 5000 rpm |
| Maximum Axial Force Fa | 160 N |
| Type Of Cooling | Natural convection |
| Length | 6.63 in (168.5 mm) |
| Centring Collar Diameter | 3.74 in (95 mm) |
| Centring Collar Depth | 0.14 in (3.5 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.35 in (9 mm) |
| Circle Diameter Of The Mountin | 4.53 in (115 mm) |
| Product Weight | 9.48 lb(US) (4.3 kg) |
| Warranty | 18 months |
