SH30703M12F2000
Servo motor SH3 070 3,1Nm,key,multi,brake,90°conn.IP54/IP65,8k RPM
Specifications
| Part Number | SH30703M12F2000 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 8.38 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....M |
| Maximum Mechanical Speed | 8000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 2.1 A |
| Continuous Stall Torque | 27.44 lbf.in (3.1 N.m) 115...480 V three phase |
| Peak Stall Torque | 100.01 lbf.in (11.3 N.m) 115...480 V three phase |
| Nominal Output Power | 240 W 115 V three phase 460 W 230 V three phase 880 W 400 V three phase 1030 W 480 V three phase |
| Nominal Torque | 26.99 lbf.in (3.05 N.m) 115 V three phase 26.11 lbf.in (2.95 N.m) 230 V three phase 24.78 lbf.in (2.8 N.m) 400 V three phase 24.07 lbf.in (2.72 N.m) 480 V three phase |
| Nominal Speed | 750 rpm 115 V three phase 1500 rpm 230 V three phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase |
| Maximum Current Irms | 8.7 A |
| Shaft End | Parallel key |
| Shaft Diameter | 0.55 in (14 mm) |
| Shaft Length | 1.18 in (30 mm) |
| Key Width | 0.20 in (5 mm) |
| IP Degree Of Protection | Shaft bushing without shaft seal ring IP54 EN/IEC 60034-5 Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 |
| Encoder Type | Absolute multiturn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | With |
| Holding Torque | 17.70 lbf.in (2 N.m) |
| Mounting Support | International standard flange |
| Motor Flange Size | 2.76 in (70 mm) |
| Torque Constant | 1.48 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 95 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 3 |
| Rotor Inertia | 0.807 kg.cm² |
| Stator Resistance | 10.7 Ohm |
| Stator Inductance | 76.85 mH |
| Maximum Radial Force Fr | 730 N 1000 rpm 580 N 2000 rpm 510 N 3000 rpm 460 N 4000 rpm 430 N 5000 rpm 400 N 6000 rpm |
| Maximum Axial Force Fa | 80 N |
| Type Of Cooling | Natural convection |
| Length | 10.00 in (254 mm) |
| Centring Collar Diameter | 2.36 in (60 mm) |
| Centring Collar Depth | 0.10 in (2.5 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.22 in (5.5 mm) |
| Circle Diameter Of The Mountin | 3.23 in (82 mm) |
| Product Weight | 8.38 lb(US) (3.8 kg) |
| Warranty | 18 months |
