SH30702M01A1200
Servo motor SH3 070 2,2Nm,nokey,single,nobrake,str.conn,IP65/IP67,8k RPM
Specifications
| Part Number | SH30702M01A1200 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 6.17 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....M |
| Maximum Mechanical Speed | 8000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 1.5 A |
| Continuous Stall Torque | 19.47 lbf.in (2.2 N.m) 115...480 V three phase |
| Peak Stall Torque | 67.27 lbf.in (7.6 N.m) 115...480 V three phase |
| Nominal Output Power | 700 W 115 V three phase 340 W 230 V three phase 660 W 400 V three phase 780 W 480 V three phase |
| Nominal Torque | 19.47 lbf.in (2.2 N.m) 115 V three phase 19.03 lbf.in (2.15 N.m) 230 V three phase 18.59 lbf.in (2.1 N.m) 400 V three phase 18.32 lbf.in (2.07 N.m) 480 V three phase |
| Nominal Speed | 750 rpm 115 V three phase 1500 rpm 230 V three phase 3000 rpm 400 V three phase 3600 rpm 480 V three phase |
| Maximum Current Irms | 6 A |
| Shaft End | Smooth shaft |
| Shaft Diameter | 0.43 in (11 mm) |
| Shaft Length | 0.91 in (23 mm) |
| Key Width | 0.16 in (4 mm) |
| IP Degree Of Protection | Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 Housing IP67 EN/IEC 60034-5 |
| Encoder Type | Absolute single turn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | Without |
| Mounting Support | International standard flange |
| Motor Flange Size | 2.76 in (70 mm) |
| Torque Constant | 1.47 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 95.9 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 3 |
| Rotor Inertia | 0.41 kg.cm² |
| Stator Resistance | 16.4 Ohm |
| Stator Inductance | 115.7 mH |
| Maximum Radial Force Fr | 710 N 1000 rpm 560 N 2000 rpm 490 N 3000 rpm 450 N 4000 rpm 410 N 5000 rpm 390 N 6000 rpm |
| Maximum Axial Force Fa | 80 N |
| Type Of Cooling | Natural convection |
| Length | 7.36 in (187 mm) |
| Centring Collar Diameter | 2.36 in (60 mm) |
| Centring Collar Depth | 0.10 in (2.5 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.22 in (5.5 mm) |
| Circle Diameter Of The Mountin | 3.23 in (82 mm) |
| Product Weight | 6.17 lb(US) (2.8 kg) |
| Warranty | 18 months |
