SH30553P01A1200
Servo motor SH3 055 1,2Nm,nokey,single,nobrake,str.conn,IP65/IP67,9k RPM
Specifications
| Part Number | SH30553P01A1200 |
|---|---|
| UNSPSC | 39121021 |
| Weight | 3.97 pound |
Characteristics
| Range Compatibility | PacDrive 3 |
|---|---|
| Product Or Component Type | Servo motor |
| Device Short Name | SH3.....P |
| Maximum Mechanical Speed | 9000 rpm |
| [Us] Rated Supply Voltage | 115...480 V |
| Network Number Of Phases | Three phase |
| Continuous Stall Current | 1.7 A |
| Continuous Stall Torque | 10.62 lbf.in (1.2 N.m) 115...480 V three phase |
| Peak Stall Torque | 30.98 lbf.in (3.5 N.m) 115...480 V three phase |
| Nominal Output Power | 240 W 115 V three phase 460 W 230 V three phase 880 W 400 V three phase 970 W 480 V three phase |
| Nominal Torque | 10.00 lbf.in (1.13 N.m) 115 V three phase 9.74 lbf.in (1.1 N.m) 230 V three phase 9.29 lbf.in (1.05 N.m) 400 V three phase 9.12 lbf.in (1.03 N.m) 480 V three phase |
| Nominal Speed | 4000 rpm 230 V three phase 9000 rpm 480 V three phase 2000 rpm 115 V three phase 8000 rpm 400 V three phase |
| Maximum Current Irms | 6.5 A |
| Shaft End | Smooth shaft |
| Shaft Diameter | 0.35 in (9 mm) |
| Shaft Length | 0.79 in (20 mm) |
| IP Degree Of Protection | Motor IP65 EN/IEC 60034-5 Shaft bushing IP65 EN/IEC 60034-5 Housing IP67 EN/IEC 60034-5 |
| Encoder Type | Absolute single turn SinCos Hiperface |
| Speed Feedback Resolution | 128 periods |
| Holding Brake | Without |
| Mounting Support | International standard flange |
| Motor Flange Size | 2.17 in (55 mm) |
| Torque Constant | 0.7 N.m/A 248 °F (120 °C) |
| Back Emf Constant | 41 V/krpm 68 °F (20 °C) |
| Number Of Motor Poles | 3 |
| Rotor Inertia | 0.134 kg.cm² |
| Stator Resistance | 10.4 Ohm |
| Stator Inductance | 37.98 mH |
| Maximum Radial Force Fr | 190 N 8000 rpm 390 N 1000 rpm 310 N 2000 rpm 270 N 3000 rpm 240 N 4000 rpm 230 N 5000 rpm 210 N 6000 rpm 200 N 7000 rpm |
| Maximum Axial Force Fa | 40 N |
| Type Of Cooling | Natural convection |
| Length | 6.95 in (176.5 mm) |
| Centring Collar Diameter | 1.57 in (40 mm) |
| Centring Collar Depth | 0.08 in (2 mm) |
| Number Of Mounting Holes | 4 |
| Mounting Holes Diameter | 0.22 in (5.5 mm) |
| Circle Diameter Of The Mountin | 2.48 in (63 mm) |
| Product Weight | 3.97 lb(US) (1.8 kg) |
| Warranty | 18 months |
