| Range Of Product |
Preventa Safety automation |
| Product Or Component Type |
Kit configurable safety controller |
| Safety Module Name |
XPSMC |
| Safety Use Category |
Category 4 maximum EN 954-1/EN/ISO 13849-1
PLE maximum EN/ISO 13849-1
SIL 3 maximum IEC 61508 |
| Type Of Start |
Configurable |
| Standards |
EN/IEC 61496-1
EN 574/ISO 13851
EN/IEC 60204-1
EN 1760-1/ISO 13856-1
EN 954-1/EN/ISO 13849-1
EN/IEC 60947-5-1
IEC 61508 |
| Product Certifications |
UL
TÜV
CSA |
| Us Rated Supply Voltage |
24 V DC - 20...20 % |
| Number Of Inputs |
32 |
| Communication Port Protocol |
CANopen 1 SUB-D 9-pin male, serial link 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps or 1 Mbps
Modbus 1 RJ45, serial link 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps |
| Safety Level |
Can reach PL e/category 4 EN 954-1/EN/ISO 13849-1
Can reach SIL 3 IEC 61508 |
| Kit Composition |
CANopen SUB-D female connector 180
Connection cable
USB/RS485 converter
Ethernet cable 2m
Safety controller
Set of screw terminals
Set of cage clamp terminals
Configuration software
Printed packaging label 80 x 50 mm
CANopen SUB-D female connector 90
Packaging small model for software configuration
VDE slot screwdriver 2.5 x 75 mm |
| Function Of Module |
Dynamic monitoring of hydraulic valves on linear presses
Eccentric press
Emergency stop monitoring, with or without time delay, 1 or 2-channel wiring
Enabling switch monitoring, 2 or 3 contacts
Foot switch monitoring
Guard monitoring for injection presses and blowing machines
Guard monitoring with 1 or 2 limit switches
Hydraulic press
Magnetic switch monitoring
Monitoring safety stop at top dead centre on eccentric press
Muting function of light curtains
Position selector
Safety mat monitoring
Safety time delays
Shaft/chain breaking monitor
Zero speed detection
Light curtain monitoring category 4 EN/IEC 61496
Two-hand control category 3 EN 574/ISO 13851 |
| Synchro Time Between Inputs |
Depending on configuration selected |
| Power Consumption In W |
12 W |
| Input Protection Type |
External fuse 16 A |
| Uc Control Circuit Voltage |
28.8 V |
| Line Resistance |
100 Ohm <6561.68 ft (2000 m) |
| Output Type |
2 relays, 2 NO contacts (4 NO total)
Solid state, 6, volt-free |
| Breaking Capacity |
180 VA holding AC-15 C300 relay output
1800 VA inrush AC-15 C300 relay output |
| Breaking Capacity |
2 A 24 V static output circuit
1.5 A 24 V DC-13)50 ms relay output |
| Output Thermal Current |
4 A for both outputs simultaneously
6 A for 1 output and 2 A for the other relay output |
| Ith Cnvtl Free Air Therm Crrt |
16 A relay output
6.5 A static output circuit |
| Associated Fuse Rating |
16 A gL power supply
4 A gL relay output
6 A fast blow relay output |
| Minimum Output Current |
10 mA relay output |
| Minimum Output Voltage |
17 V relay output |
| Response Time |
Configurable : 20 ms or 30 ms with software XPSMCWIN |
| Ui Rated Insulation Voltage |
300 V 2)IEC 60647-5-1, DIN VDE 0110 part 1 |
| Uimp Rated Imp Wstd Voltage |
4 kV III IEC 60647-5-1, DIN VDE 0110 part 1 |
| Method Of Access |
Slave |
| Exchange Size |
14 words |
| Number Of Addresses |
1…127 CANopen
1…247 Modbus |
| Parity |
Even Modbus
No Modbus
Odd Modbus |
| Data Format |
1 start bit/8 data bits
1 stop bit even or odd
2 stop bits without parity
RTU (Remote Terminal Unit) mode |
| Supported Modbus Function |
01 8-bit output data/32-bit input data
02 32-bit input data/8-bit output data
03 information and errors |
| Local Signalling |
48 LEDs |
| Mounting Support |
Mounting plate |
| Depth |
6.02 in (153 mm) |
| Height |
5.96 in (151.5 mm) |
| Width |
2.91 in (74 mm) |
| Product Weight |
1.85 lb(US) (0.84 kg) |
| IP Degree Of Protection |
IP20 EN/IEC 60529 |
| Ambient Air Temp For Op |
14…131 °F (-10…55 °C) |
| Ambient Air Temp For Storage |
-13…185 °F (-25…85 °C) |
| Category |
22477 - SAFETY MODULES (PREVENTA) |
| Discount Schedule |
SAF2 |
| GTIN |
03389119018265 |
| Nbr. Of Units In Pkg. |
1 |
| Country Of Origin |
FR |
| EU RoHs Directive |
Pro-active compliance (Product out of EU RoHS legal scope) |
