| Range Of Product |
OsiSense XS ATEX D |
| Series Name |
Application |
| Sensor Type |
Inductive proximity sensor |
| Device Application |
Rotation monitoring ATEX dust |
| Sensor Name |
XS9 |
| Sensor Design |
Flat form 26 x 26 x 13 |
| Size |
13 mm |
| Body Type |
Fixed |
| Flush Mountability |
Flush mountable |
| Material |
Plastic |
| Enclosure Material |
PBT |
| Sn Nominal Sensing Distance |
0.39 in (10 mm) |
| Type Of Output Signal |
Discrete |
| Wiring Techniquees |
3-wire |
| Discrete Output Function |
1 NC |
| Output Circuit Type |
DC |
| Discrete Output Type |
PNP |
| Electrical Connection |
Remote male connector M12, 4 pins |
| Cable Length |
0.49 ft (0.15 m) |
| Us Rated Supply Voltage |
12...24 V DC |
| Switching Capacity In Ma |
<= 100 mA |
| IP Degree Of Protection |
IP67 double insulation IEC 60529 |
| Detection Face |
Frontal |
| Front Material |
PBT |
| Sensing Range |
0.31...0.59 in (8...15 mm) |
| Adjustable Frequency Range |
6…6000 cyc/mn |
| Operating Zone |
0.00…0.31 in (0…8 mm) |
| Differential Travel |
3...15% of Sr |
| Repeat Accuracy |
3% of Sr |
| Wire Insulation Material |
PvR |
| Status Led |
Supply on 1 LED green)
Output state 1 LED yellow) |
| Supply Voltage Limits |
10…36 V DC |
| Residual Current |
100 mA open state |
| Switching Frequency |
<= 800 Hz |
| Voltage Drop |
<2 V closed) |
| Current Consumption |
0...10 mA no-load |
| Run-Up Delay At Power-Up |
9 s standard |
| Marking |
II2 D-Ex tb IIIC T90°C Db IP68 |
| Depth |
0.51 in (13 mm) |
| Height |
1.57 in (40 mm) |
| Width |
1.02 in (26 mm) |
| Environmental Characteristic |
Hazardous location |
| Standards |
EN/IEC 60079-31
EN/IEC 60079-0 |
| Directives |
94/9/EC - ATEX directive |
| Product Certifications |
INERIS 06ATEX0065X |
| Ambient Air Temp For Op |
-13…158 °F (-25…70 °C) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Vibration Resistance |
25 gn +/- 2 mm 10…55 Hz)IEC 60068-2-6 |
| Shock Resistance |
50 gn 11 ms IEC 60068-2-27 |
| Dust Zone |
Zone 21 - 22 |
