| Range Of Product |
Modicon Power Supply |
| Product Or Component Type |
Power supply |
| Power Supply Type |
Regulated switch mode |
| Variant Option |
Optimized |
| Enclosure Material |
Aluminium |
| Nominal Input Voltage |
100...240 V AC single phase
100...240 V AC 2 phases
140...340 V DC |
| Input Voltage Limits |
85...264 V AC
120...375 V DC |
| Rated Power In W |
120 W |
| Output Voltage |
24 V DC |
| Power Supply Output Current |
5 A |
| Nominal Network Frequency |
50…60 Hz |
| Network System Compatibility |
TN
TT
IT |
| Leakage Current |
1 mA 240 V AC |
| Input Protection Type |
Integrated fuse (not interchangeable) 4 A
External protection (recommended) 20 A C
External protection (recommended) 13 A C |
| Inrush Current |
30.0 A 115 V
60.0 A 230 V |
| Power Factor |
0.55 at 115 V AC
0.45 at 230 V AC |
| Efficiency |
85 % 115 V AC
88 % 230 V AC |
| Output Voltage Adjustment |
22...28 V |
| Power Dissipation In W |
25 W |
| Current Consumption |
< 2.5 A 115 V AC
< 1.4 A 230 V AC
< 1.3 A 140 V DC |
| Turn-On Time |
< 1 s |
| Holding Time |
> 20 ms 115 V AC
> 40 ms 230 V AC |
| Startup With Capacitive Loads |
8000 µF |
| Residual Ripple |
< 120 mV |
| Expected Capacitor Life Time |
10 year(s) |
| Meantime Between Failure |
700000 h at 77 °F (25 °C), full load conforming to SR 332 |
| Output Protection Type |
Against overload and short-circuits automatic reset
Against over temperature manual reset
Against overvoltage manual reset |
| Connections - Terminals |
Screw connection 0.5...4 mm², AWG 20...AWG 12) without wire end ferrule output
Screw connection 0.5...2.5 mm², AWG 20...AWG 14) with wire end ferrule output
Screw connection 0.75...4 mm², AWG 18...AWG 12) without wire end ferrule input
Screw connection 0.75...4 mm², AWG 18...AWG 12) with wire end ferrule input |
| Line And Load Regulation |
< 0.5 %line
< 1 %load |
| Status Led |
Output voltage 1 LED Green) |
| Depth |
4.63 in (117.6 mm) |
| Height |
4.87 in (123.6 mm) |
| Width |
1.57 in (40 mm) |
| Product Weight |
1.21 lb(US) (0.55 kg) |
| Output Coupling |
Parallel
Serial |
| Mounting Support |
Top hat type TH35-15 rail IEC 60715
Top hat type TH35-7.5 rail IEC 60715
Double-profile DIN rail |
| Standards |
EN 62368-1
EN/IEC 61204-3
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
UL 62368-1
CSA C22.2 No 62368-1
UL 508
CSA C22.2 No. 107.1 |
| Product Certifications |
CE
CUL Listed
CUL Recognized
RCM
CB Scheme
EAC
KC |
| Environmental Characteristic |
3M4 IEC 60721-3-3 |
| Operating Altitude |
< 5000 m |
| Shock Resistance |
100 m/s² 11 ms |
| IP Degree Of Protection |
IP20 |
| Ambient Air Temp For Op |
-4…14 °F (-20…-10 °C) with current derating of 2 % per °C)
104…158 °F (40…70 °C) with current derating of 1.8 % per °C)
122…158 °F (50…70 °C) with current derating of 2.5 % per °C) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Relative Humidity |
0…95 % without condensation |
| Overvoltage Category |
II |
| Safety Level |
Cl 1 with PE connection |
| Electrical Shock Protect Class |
Class II without PE connection |
| Pollution Degree |
2 |
| Vibration Resistance |
+/- 3 mm 2…9 Hz)IEC 60068-2-6
10 m/s² 9…200 Hz)IEC 60068-2-6 |
