| Range Of Product |
Modicon Power Supply |
| Product Or Component Type |
Power supply |
| Power Supply Type |
Regulated switch mode |
| Variant Option |
Modular |
| Enclosure Material |
Plastic |
| Nominal Input Voltage |
100...240 V AC single phase
100...240 V AC 2 phases |
| Input Voltage Limits |
90...264 V AC |
| Rated Power In W |
12 W |
| Output Voltage |
12 V DC |
| Power Supply Output Current |
1 A |
| Nominal Network Frequency |
50…60 Hz |
| Network System Compatibility |
TN
TT
IT |
| Leakage Current |
0.25 mA 240 V AC |
| Input Protection Type |
Integrated fuse (not interchangeable) 3.15 A
External protection (recommended) 20 A B
External protection (recommended) 20 A C
External protection (recommended) 2 A B
External protection (recommended) 2 A C |
| Inrush Current |
15 A 115 V
30 A 230 V |
| Power Factor |
0.51 at 115 V AC
0.40 at 230 V AC |
| Efficiency |
80 % 115 V AC
80 % 230 V AC |
| Power Dissipation In W |
3 W |
| Current Consumption |
< 0.4 A 115 V AC
< 0.25 A 230 V AC |
| Turn-On Time |
< 2 s |
| Holding Time |
> 10 ms 115 V AC
> 60 ms 230 V AC |
| Startup With Capacitive Loads |
3000 µF |
| Residual Ripple |
< 100 mV |
| Expected Capacitor Life Time |
10 year(s) |
| Meantime Between Failure |
3000000 h at 77 °F (25 °C), full load
1000000 h at 131 °F (55 °C), 80 % load |
| Output Protection Type |
Against overload and short-circuits automatic reset
Against over temperature manual reset
Against overvoltage manual reset |
| Connections - Terminals |
Screw connection 0.5...1.5 mm², AWG 20...AWG 16) without wire end ferrule input/output
Screw connection 0.5...1 mm², AWG 20...AWG 18) with wire end ferrule input/output |
| Line And Load Regulation |
< 0.5 %line
< 1 %load |
| Status Led |
Output voltage 1 LED Green) |
| Depth |
2.19 in (55.6 mm) |
| Height |
3.58 in (91 mm) |
| Width |
0.71 in (18 mm) |
| Product Weight |
0.22 lb(US) (0.101 kg) |
| Output Coupling |
Serial |
| Mounting Support |
Top hat type TH35-15 rail IEC 60715
Top hat type TH35-7.5 rail IEC 60715
Double-profile DIN rail
panel mounting |
| Standards |
EN 62368-1
EN/IEC 61010-1
EN 61010-2-201
EN/IEC 61204-3
EN 61000-6-1
EN 61000-6-2
EN 61000-6-3
EN 61000-6-4
EN 61000-3-2
EN 61000-3-3
UL 62368-1
UL 61010-1
UL 61010-2-201
CSA C22.2 No 62368-1
CSA C22.2 No 61010-1
CSA C22.2 No 61010-2-201 |
| Product Certifications |
CE
CUL Listed
CUL Recognized
RCM
CB Scheme
EAC
KC
NEC class 2 |
| Operating Altitude |
< 6561.68 ft (2000 m) overvoltage category III
2000 m...5000 m overvoltage category II |
| Shock Resistance |
100 m/s² 11 ms |
| IP Degree Of Protection |
IP20 |
| Ambient Air Temp For Op |
-13…131 °F (-25…55 °C) without current derating)
131…158 °F (55…70 °C) with current derating of 2.67 % per °C) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Relative Humidity |
0…95 % without condensation |
| Overvoltage Category |
II |
| Safety Level |
Cl 1 with PE connection |
| Electrical Shock Protect Class |
Class II without PE connection |
| Pollution Degree |
2 |
| Vibration Resistance |
3 mm 2…9 Hz)IEC 60721-3-3
10 m/s² 9…200 Hz)IEC 60721-3-3 |
| Electromagnetic Immunity |
Immunity to electrostatic discharge 6 kV contact discharge) EN/IEC 61000-4-2
Immunity to electrostatic discharge 9 kV air discharge) EN/IEC 61000-4-2
Electromagnetic field immunity test 10 V/m 80 MHz...2 GHz) EN/IEC 61000-4-3
Electromagnetic field immunity test 5 V/m 2...2.7 GHz) EN/IEC 61000-4-3
Electromagnetic field immunity test 3 V/m 2.7...6 GHz) EN/IEC 61000-4-3
Immunity to fast transients 4 kV on input-output) EN/IEC 61000-4-4
Surge immunity test 3 kV between power supply and earth) EN/IEC 61000-4-5
Surge immunity test 1.5 kV between phases) EN/IEC 61000-4-5
Immunity to conducted disturbances 10 Vrms 0.15...80 MHz) EN/IEC 61000-4-6
Immunity to magnetic fields 30 A/m 50...60 Hz) EN/IEC 61000-4-8
Immunity to voltage dips 100 % 1 cycle) EN/IEC 61000-4-11
Immunity to voltage dips 60 % 10 cycles) EN/IEC 61000-4-11
Immunity to voltage dips 30 % 25 cycles) EN/IEC 61000-4-11
Disturbing field emission EN 55016-2-3
Limits for harmonic current emissions EN 61000-3-2
Conducted disturbance emission EN 55016-1-2
Conducted disturbance emission EN 55016-2-1 |
| Electromagnetic Emission |
Conducted emissions EN 61000-6-3
Radiated emissions EN 61000-6-4 |
