Photo-electric sensor – XUY – fork – 2X40mm – 12..24VDC – M8
This product is part of the XU range, an offer of photoelectric sensors. This photoelectric sensor has a fork design. It has a through-beam detection system. It supports 2mm nominal sensing distance and PNP or NPN solid state discrete output. It is furnished with 4-pin M8 male connector for electrical connection. It is an IP65 rated product. It is a photoelectric sensor with a rated supply voltage of 12V to 24V DC with reverse polarity protection, a no-load current consumption of 40mA and a switching frequency of 10kHz. This sensor has infrared, continuous emission. The enclosure is made of painted aluminium. Its dimensions are 60mm (Length) x 40mm (Width) x 12mm (Depth). It is ideal for material handling, packaging, labelling, assembly, lift, escalators or food and beverage industries. This product is certified by CE and CULus.
Brand: DINEL
Add to Quote CatalogueSpecifications
| Part Number | XUYF953002COS |
|---|---|
| UPC | 389119007344 |
| UPC11 | 38911900734 |
| EAN | 3389119007344 |
| Prop 65 | This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP) and Diisononyl phthalate (DINP) which is known to the State of California to cause Carcinogen and Reproductive harm. For more information go to www.p65warnings.ca.gov |
| RoHS Compliant | Yes |
| Depth | 0.47 inch |
| Width | 1.57 inch |
Characteristics
| Range Of Product | OsiSense XU |
|---|---|
| Series Name | Application |
| Electronic Sensor Type | Photo-electric sensor |
| Sensor Name | XUY |
| Sensor Design | Fork |
| Detection System | Thru beam |
| Emission | Infrared, continuous |
| Passage Width | 0.08 in (2 mm) |
| Passage Depth | 1.57 in (40 mm) |
| Material | Metal |
| Supply Circuit Type | DC |
| Wiring Techniquees | 4-wire |
| Discrete Output Type | PNP/NPN |
| Electrical Connection | 1 male connector M8, 4 pins |
| Product Specific Application | Control of tools travel Detection on a labelling machine Lateral shift control of a belt Detection of sheets overlapping Lift cage position control Detection of marks on a translucent film |
| Sn Nominal Sensing Distance | 0.08 in (2 mm) |
| Enclosure Material | Painted aluminium strong housing |
| Type Of Output Signal | Discrete |
| Output Type | Solid state |
| Us Rated Supply Voltage | 12...24 V DC reverse polarity protection |
| Supply Voltage Limits | 10…30 V DC |
| Switching Capacity In Ma | 100 mA overload and short-circuit protection) |
| Switching Frequency | 10 kHz |
| Voltage Drop | <1 V 10 mA closed state) <2 V 100 mA closed state) |
| Current Consumption | 40 mA no-load |
| Time Response | 30 µs |
| Delay Recovery | 30 µs |
| Depth | 0.47 in (12 mm) |
| Length | 2.36 in (60 mm) |
| Width | 1.57 in (40 mm) |
| Product Certifications | CULus CE |
| Ambient Air Temp For Op | -4…140 °F (-20…60 °C) |
| Ambient Air Temp For Storage | -4…176 °F (-20…80 °C) |
| Immunity To Ambient Light | 3000 lux incandescent bulb 3000 lux natural light |
| IP Degree Of Protection | IP65 IEC 60529 |
| GTIN | 03389119007344 |
| Nbr. Of Units In Pkg. | 1 |
| EU RoHs Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Mercury Free | Yes |
| Warranty | 18 months |
