| Part Number | 926250 |
|---|---|
| EAN | 3606481340580 |
| RoHS Compliant | Yes |
| Depth | 2.83 inch |
| Height | 3.34 inch |
| Width | 1.42 inch |
| Range | Multi 9 |
|---|---|
| Product Or Component Type | Voltage release |
| Device Short Name | CNV |
| Poles Description | 2P |
| Ue Rated Operational Voltage | 230 V AC 50 Hz between phase and neutral |
| Supply Voltage Limits | 50…440 V AC, 1 phase |
| Ie Rated Operational Current | 50 A |
| Ov/Uv Auto-Reset Complusive Delay Time | Overvoltage 275 V 3…15 s) Overvoltage 300 V 1…5 s) Overvoltage 350 V 0.25…0.75 s) Overvoltage 400 V 0.1…0.2 s) Undervoltage 50...160 V 0.6…5 s) Lockout |
| Reset | Automatic reset 25…35 s 253 V for overvoltage Automatic reset 25…35 s 195 V for undervoltage |
| Electric Clearance | 0.05 in (1.2 mm) |
| Leakage Current | 2 mA |
| Creepage Distance | 5.6 mm |
| Uimp Rated Imp Wstd Voltage | 4 kV between phases 4 kV between phase and neutral |
| Local Signalling | Indicator light green, steady fault Indicator light green, flashing lock Indicator light red, steady operating |
| Time Delay | 0...800 s on-delay |
| Function Available | Real time voltage detection |
| Ui Rated Insulation Voltage | 500 V |
| Rated Brking And Making Cap | 400 A 242 V, cos phi = 0.85 12 times) |
| Icw Rated Short-Time Wstd Crrt | 504 kA 4 s |
| Mounting Support | DIN rail |
| Mounting Mode | By clips |
| Cable Entry | Bottom entry |
| Mounting Location | Downstream |
| Installation Direction | Horizontal Vertical |
| Use Category | Indoor installation |
| 9 mm Pitches | 4 |
| Height | 3.34 in (84.8 mm) |
| Width | 1.42 in (36 mm) |
| Depth | 2.83 in (72 mm) |
| Colour Tint | Clips light grey RAL 7035) Housing light grey RAL 7035) |
| Electrical Durability | 12000 cycles 63 A 285 V AC 0.9 |
| Mechanical Robustness | Vibrations 3 Gn, 5…100 Hz) IEC 60068-2-6 Shocks 6 ms with protective package 30 Gn) IEC 60068-2-27 Free fall resistance 0.8m, without package |
| Service Life | 10 year(s) |
| Electromagnetic Compatibility | Electrostatic discharge immunity test 6 kV contact discharge)level 3 IEC 61000-4-2 Electrostatic discharge immunity test 8 kV air discharge)level 3 IEC 61000-4-2 Surge immunity test 2 kV common mode) IEC 61000-4-5 Surge immunity test 4 kV differential mode) IEC 61000-4-5 Electrical fast transient/burst immunity test 4 kV, 2.5 kHz, 5 kHz and 100 kHz IEC 61000-4-4 Immunity to conducted disturbances 10 V, 0.15...80 MHzlevel 3 IEC 61000-4-6 Immunity to conducted RF disturbances 10 V, 80...1000 MHz and 1400...6000 MHzlevel 3 IEC 61000-4-3 Conducted emissionclass B Radiated emissionclass B |
| Connections - Terminals | Tunnel type terminals top or bottom 0.00…0.05 in² (1…35 mm²) rigid without cable end Tunnel type terminals top or bottom 0.00…0.04 in² (1…25 mm²) flexible with or without cable end |
| Tightening Torque | Power circuit 30.98 lbf.in (3.5 N.m) |
| Standards | JB/T 12762-2015 |
| Product Certifications | REACH |
| Directives | 2002/95/EC - RoHS directive |
| IP Degree Of Protection | IP40 on front face IEC 60529 IP20 B other parts IEC 60529 |
| Pollution Degree | 2 |
| Operating Altitude | <= 6561.68 ft (2000 m) |
| Ambient Air Temp For Op | -13…131 °F (-25…55 °C) |
| Ambient Air Temp For Storage | -40…176 °F (-40…80 °C) |
| Relative Humidity | 0…75 % operating 0…95 % storage |
| Nbr. Of Units In Pkg. | 1 |
| Green Premium Status | Green Premium product |
| EU RoHs Directive | Compliant |
| Mercury Free | Yes |
| WEEE | The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins. |
Powered by ![]()
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366