| Range |
PowerLogic |
| Product Name |
PowerLogic ION8650 |
| Device Short Name |
ION8650A |
| Product Or Component Type |
Energy and power quality meter |
| Power Quality Analysis |
harmonic distortion
programmablity (logic and math functions)
voltage sag and swell detection
waveform capture
up to the 63rd harmonic
IEC 61000-4-30 class A power quality measurement
IEC 61000-4-15 flicker
magnitude harmonic up to the 50th
transient capture
EN 50160 compliance report |
| Device Application |
Demand and power factor control
Load curtailment
Energy pulsing and totalisation
Co-generation and IPP monitoring
Instrument transformer correction
Tariff metering
Equipment monitoring and control |
| Type Of Measurement |
Power factor total
Power factor per phase
Apparent power total
Apparent power per phase
Active power total
Active power per phase
Reactive power total
Reactive power per phase
Current
Voltage
Frequency |
| Supply Voltage |
120...277 V AC 47...63 Hz
120...480 V AC 47...63 Hz
65...120 V AC 47...63 Hz
80...160 V DC |
| Network Frequency |
60 Hz |
| Outlet Standard |
American |
| In Rated Current |
5 A
1 A
2 A |
| Poles Description |
1P + N
3P + N
3P |
| Power Consumption In Va |
24 VA |
| Power Consumption In Va |
33 VA |
| Display Type |
FSTN transflective LCD |
| Form Designation |
36S 2 1/2-element 4
9 3-element 4
35 2-element 3
29 2 1/2-element 4 |
| Sampling Rate |
1024 samples/cycle |
| Measurement Current |
0.001…24 A |
| Input Type |
current 0.01...20 A 0.05 Ohm) |
| Measurement Voltage |
57…277 V AC phase to neutral
100…480 V AC phase to phase |
| Number Of Inputs |
3 digital 0.001...100 mA 30 V DC |
| Measurement Accuracy |
Current 0.1 %
Voltage 0.1 %
Power 0.1 %
Power factor 0.1 %
Frequency 0.001 Hz
Energy 0.1 % |
| Accuracy Class |
Class 0.2S energy IEC 62053-22
Class 0.2S energy IEC 62053-23
Class 0.2 energy ANSI C12.20 |
| Number Of Outputs |
2 pulse
4 form C relay output |
| Communication Port Protocol |
TCP/IP 10/100 Mbit/s
DNP3 300...115200 bauds
ION 300...115200 bauds
DLMS 300...115200 bauds
Modbus 57600 bauds
Ansi C12.18 <= 19200 bauds
DNP3 10/100 Mbit/s
ION 10/100 Mbit/s
IEC 61850 ed. 2 10/100 Mbit/s
TCP/IP 300...57600 bauds
Modbus RTU, master/slave 300...115200 bauds
Modbus TCP, master/slave 10/100 Mbit/s
EtherGate
ModemGate |
| Communication Port Support |
RJ11 modem
RJ45 Ethernet
SUB-D 9 RS485/RS232
infrared
Terminal block RS485 |
| Time Synchronisation Protocol |
GPS: Truetime/Datum
IRIG-B |
| Data Recording |
Event logs
Time stamping
Alarms
Data logs
Revenue logs
GPS synchronisation
Harmonics logs
Transient logs
Historical logs
Sag and swell logs |
| Transmission Rate |
57600 bauds
<= 19200 bauds
10/100 Mbit/s
300...115200 bauds
300...57600 bauds |
| Memory Capacity |
128 MB |
| Web Services |
Web server
Alarm notification by e-mail
Port addressing user designed
Robust security logs |
| Ethernet Service |
SNMP-Traps and SYSLOG
Enable/disable Ethernet protocols
Enable/disable serial ports |
| Tamperproof Of Settings |
Protected by access code
Hardware lock by jumper |
| Provided Equipment |
Break out panel |
| Compatibility Code |
ION8650A |
| Electromagnetic Compatibility |
Electrostatic discharge immunity test IEC 61000-4-2
Susceptibility to electromagnetic fields IEC 61000-4-3
Electrical fast transient/burst immunity test IEC 61000-4-4
1.2/50 µs shock waves immunity test IEC 61000-4-5
Conducted and radiated emissionsB CISPR 22
Conducted RF disturbances IEC 61000-4-6
Immunity to impulse waves IEC 61000-4-12 |
| Mounting Mode |
Flush-mounted |
| Enclosure Type |
FT21 switchboard |
| Type Of Installation |
Indoor installation |
| Overvoltage Category |
III |
| IP Degree Of Protection |
Back IP30
Front face IP50 |
| Relative Humidity |
5…95 % |
| Pollution Degree |
2 |
| Ambient Air Temp For Op |
-40…185 °F (-40…85 °C) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Operating Altitude |
0...9842.52 ft (0...3000 m) |
| Standards |
ANSI C12.1
IEC 62052-11 |
| Width |
6.42 in (163 mm) |
| Depth |
8.98 in (228 mm) |
| Height |
11.22 in (285 mm) |
