| Range |
PowerLogic |
| Device Short Name |
ION8650A |
| Product Or Component Type |
Energy and power quality meter |
| Power Quality Analysis |
IEC 61000-4-15 flicker
magnitude harmonic up to the 50th
transient capture
EN 50160 ed. 4 compliance report
harmonic distortion
voltage sag and swell detection
waveform capture
programmablity (logic and math functions)
up to the 63rd harmonic
IEC 61000-4-30 class A power quality measurement |
| Device Application |
Energy pulsing and totalisation
Instrument transformer correction
Demand and power factor control
Equipment monitoring and control
Load curtailment
Tariff metering
Co-generation and IPP monitoring |
| Type Of Measurement |
Current
Voltage
Frequency
Apparent power total
Power factor total
Apparent power per phase
Power factor per phase
Active power total
Active power per phase
Reactive power total
Reactive power per phase |
| Supply Voltage |
120...277 V AC 47...63 Hz
65...120 V AC 47...63 Hz
80...160 V DC |
| Network Frequency |
50 Hz |
| Outlet Standard |
American |
| In Rated Current |
5 A
1 A
2 A |
| Type Of Network |
3P + N
3P
1P + N |
| Power Consumption In Va |
24 VA |
| Power Consumption In Va |
33 VA |
| Display Type |
FSTN transflective LCD |
| Form Designation |
9S 3-element 4
36S 2 1/2-element 4
29S 2 1/2-element 4 |
| Sampling Rate |
1024 samples/cycle |
| Measurement Current |
0.001…24 A |
| Input Type |
current 0.01...20 A 0.05 Ohm) |
| Measurement Voltage |
57…277 V AC phase to neutral
100…480 V AC phase to phase |
| Number Of Inputs |
3 digital 0.001...100 mA 30 V DC |
| Measurement Accuracy |
Current 0.1 %
Voltage 0.1 %
Power 0.1 %
Power factor 0.1 %
Frequency 0.001 Hz
Energy 0.1 % |
| Accuracy Class |
Class 0.2S energy IEC 62053-23
Class 0.2 energy ANSI C12.20
Class 0.2S energy IEC 62053-22 |
| Number Of Outputs |
2 pulse
4 form C relay output |
| Communication Port Protocol |
DNP3 300...115200 bauds
ION 300...115200 bauds
Ansi C12.18 <= 19200 bauds
IEC 61850 ed. 2 10/100 Mbit/s
TCP/IP 10/100 Mbit/s
DLMS 300...115200 bauds
Modbus 57600 bauds
DNP3 10/100 Mbit/s
ION 10/100 Mbit/s
Modbus RTU, master/slave 300...115200 bauds
Modbus TCP, master/slave 10/100 Mbit/s
EtherGate |
| Communication Port Support |
RJ45 Ethernet
SUB-D 9 RS485/RS232
Terminal block RS485
infrared |
| Time Synchronisation Protocol |
GPS: Truetime/Datum
IRIG-B |
| Data Recording |
Time stamping
Event logs
Harmonics logs
GPS synchronisation
Revenue logs
Data logs
Historical logs
Sag and swell logs
Transient logs
Alarms |
| Transmission Rate |
57600 bauds
<= 19200 bauds
300...115200 bauds
10/100 Mbit/s |
| Memory Capacity |
128 MB |
| Web Services |
Port addressing user designed
Alarm notification by e-mail
Robust security logs
Web server |
| Ethernet Service |
Enable/disable serial ports
Enable/disable Ethernet protocols
SNMP-Traps and SYSLOG |
| Tamperproof Of Settings |
Protected by access code |
| Compatibility Code |
ION8650A |
| Electromagnetic Compatibility |
Electrostatic discharge immunity test IEC 61000-4-2
Conducted RF disturbances IEC 61000-4-6
Immunity to impulse waves IEC 61000-4-12
Electrical fast transient/burst immunity test IEC 61000-4-4
Susceptibility to electromagnetic fields IEC 61000-4-3
1.2/50 µs shock waves immunity test IEC 61000-4-5
Conducted and radiated emissionsB CISPR 22 |
| Mounting Mode |
Socket-mounted |
| Mounting Support |
Enclosure door |
| Type Of Installation |
Indoor installation |
| Overvoltage Category |
III |
| IP Degree Of Protection |
Front face IP65
Back IP51 |
| Relative Humidity |
5…95 % |
| Pollution Degree |
2 |
| Ambient Air Temp For Op |
-40…185 °F (-40…85 °C) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Operating Altitude |
0...9842.52 ft (0...3000 m) |
| Standards |
ANSI C12.1
IEC 62052-11 |
| Width |
7.01 in (178 mm) |
| Depth |
9.33 in (237 mm) |
| Height |
7.01 in (178 mm) |
| Product Weight |
15.43 lb(US) (7 kg) |
| Nbr. Of Units In Pkg. |
1 |
