| Range Of Product |
OsiSense XS ATEX D |
| Series Name |
General purpose |
| Sensor Type |
Inductive proximity sensor |
| Device Application |
ATEX dust |
| Sensor Name |
XS7 |
| Sensor Design |
Flat form 26 x 26 x 13 |
| Size |
13 mm |
| Body Type |
Fixed |
| Flush Mountability |
Flush mountable |
| Material |
Plastic |
| Enclosure Material |
PBT |
| Sn Nominal Sensing Distance |
0.39 in (10 mm) |
| Type Of Output Signal |
Discrete |
| Wiring Techniquees |
3-wire |
| Discrete Output Function |
1 NO |
| Output Circuit Type |
DC |
| Discrete Output Type |
PNP |
| Electrical Connection |
Cable |
| Cable Length |
32.81 ft (10 m) |
| Us Rated Supply Voltage |
12...24 V DC reverse polarity protection |
| Switching Capacity In Ma |
<= 100 mA DC overload and short-circuit protection |
| IP Degree Of Protection |
IP68 double insulation IEC 60529 |
| Detection Face |
Frontal |
| Front Material |
PBT |
| Sensing Range |
> 0.31...0.59 in (> 8...15 mm) |
| Operating Zone |
0.00…0.31 in (0…8 mm) |
| Differential Travel |
1...15% of Sr |
| Cable Composition |
3 x 0.34 mm² |
| Wire Insulation Material |
PvR |
| Status Led |
Output state 1 LED yellow) |
| Supply Voltage Limits |
10…36 V DC |
| Residual Current |
0.5 mA open state |
| Switching Frequency |
<= 1000 Hz |
| Voltage Drop |
<2 V closed) |
| Current Consumption |
<= 10 mA no-load |
| Delay First Up |
10 ms |
| Delay Response |
2 ms |
| Delay Recovery |
6 ms |
| Marking |
II2 D-Ex tb IIIC T90°C Db IP67 |
| Depth |
0.51 in (13 mm) |
| Height |
1.57 in (40 mm) |
| Width |
1.02 in (26 mm) |
| Environmental Characteristic |
Hazardous location |
| Standards |
EN/IEC 60079-0
EN/IEC 60079-31 |
| Directives |
94/9/EC - ATEX directive |
| Product Certifications |
INERIS 06ATEX0065X |
| Ambient Air Temp For Op |
-13…158 °F (-25…70 °C) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Vibration Resistance |
25 gn +/- 2 mm 10…55 Hz)IEC 60068-2-6 |
| Shock Resistance |
50 gn 11 ms IEC 60068-2-27 |
