| Range Of Product |
Modicon X80 |
| Product Or Component Type |
Discrete I/O module |
| Product Specific Application |
For severe environments |
| Discrete Input Number |
8 |
| Input Type |
Current sink (logic positive) |
| Discrete Input Voltage |
24 V DC positive |
| Discrete Input Current |
3.5 mA |
| Input Compatibility |
With 2-wire/3-wire proximity sensors IEC 60947-5-2 |
| Discrete Output Number |
8 |
| Discrete Output Type |
Solid state |
| Discrete Output Voltage |
24 V 19...30 V DC 140 °F (60 °C)
24 V 26.4 V DC 158 °F (70 °C) |
| Discrete Output Current |
0.5 A |
| Sensor Power Supply |
21.1...29.0 V 158 °F (70 °C)
19...30 V 140 °F (60 °C) |
| Voltage State 1 Guaranteed |
>= 11 V |
| Current State 1 Guaranteed |
>= 3 mA |
| Voltage State 0 Guaranteed |
<= 5 V |
| Current State 0 Guaranteed |
<= 1.5 mA |
| Current Per Channel |
0.55 A 158 °F (70 °C)
0.625 A 140 °F (60 °C) |
| Current Per Module |
5 A 140 °F (60 °C)
4.4 A 158 °F (70 °C) |
| Leakage Current |
0.5 mA at state 0 |
| Voltage Drop |
<1.2 V at state 1 |
| Input Impedance |
6800 Ohm |
| Insulation Resistance |
> 10 MOhm 500 V DC |
| Power Dissipation In W |
3.7 W |
| Dc Typical Response Time |
4 ms |
| Dc Maximum Response Time |
7 ms |
| Response Time On Output |
1.2 ms |
| Paralleling Of Outputs |
Yes : 2 maximum |
| Typical Current Consumption |
79 mA 3.3 V DC
59 mA 24 V DC |
| Current Consumption |
<= 111 mA 3.3 V DC
<= 67 mA 24 V DC |
| Mtbf Reliability |
427772 H |
| Protection Type |
1 external fuse per group of input channel 0.5 A fast blow
overvoltage protection on output
reverse polarity protection on input
reverse polarity protection on output |
| Output Overload Protection |
With electronic circuit breaker 1.5 In < Id < 2 In
With current limiter |
| Output Overvoltage Protct |
With transil diode |
| Output Short-Circuit Protct |
With 2 A external fuse |
| Reverse Polarity Protection |
Reverse mounted diode |
| Voltage Detection Threshold |
< 14 V DC preactuator fault
< 14 V DC sensor fault
> 18 V DC preactuator OK
> 18 V DC sensor OK |
| Tungsten Load |
6 W |
| Switching Frequency |
0.5/LI² Hz |
| Overload Time |
15 ms |
| Load Impedance Ohmic |
>= 48 Ohm |
| Status Led |
Module operating (RUN) 1 LED Green)
Channel diagnostic 1 LED per channel Green)
Module error (ERR) 1 LED Red)
Module I/O 1 LED Red) |
| Product Weight |
0.25 lb(US) (0.115 kg) |
| IP Degree Of Protection |
IP20 |
| Directives |
2014/35/EU - low voltage directive
2014/30/EU - electromagnetic compatibility
2012/19/EU - WEEE directive |
| Product Certifications |
CE
RCM
CSA
EAC
Merchant Navy
UL
ATEX
IEC-Ex |
| Standards |
EN/IEC 61010-2-201
EN/IEC 61131-2
UL 61010-2-201
CSA C22.2 No 61010-2-201 |
| Environmental Characteristic |
Hazardous location |
| Dielectric Strength |
1500 V AC 50/60 Hz 1 minute, output/ground
1500 V AC 50/60 Hz 1 minute, output/internal logic
1500 V AC 50/60 Hz 1 minute, primary/secondary
500 V DC 1 minute, between group of inputs and outputs |
| Vibration Resistance |
3 gn |
