| Range Of Product |
Modicon STB distributed I/O solution |
| Product Or Component Type |
Counter kit |
| Number Of Channels |
1 |
| Kit Composition |
STBEHC3020 module
STBXBA3000 base
STBXTS215018 terminal spring clamp connector |
| Counting Input Number |
2 |
| Counting Frequency |
40000 Hz |
| Counter Functions |
Measure time periods
Up/down counting
Down counting
Frequency meter
Loop (modulo) counting
Count events |
| Counter Configuration |
Modicon configuration software |
| Input Compatibility |
2/3 wire photo-electric sensor
Mechanical contact
With 2-wire/3-wire proximity sensors
Incremental encoder |
| Input Voltage |
24 V |
| Input Voltage Limits |
19.2...30 V |
| Input Voltage Type |
DC |
| Input Current |
6 mA |
| Input Logic |
Positive |
| Voltage State 0 Guaranteed |
-3...5 V |
| Voltage State 1 Guaranteed |
11...30 V |
| Current State 0 Guaranteed |
<= 1.5 mA |
| Current State 1 Guaranteed |
>= 2 mA |
| Filter Time |
0 ms digital 40000 Hz counting inputs
0.4 ms digital 1000 Hz counting inputs
1.2 ms digital 400 Hz counting inputs
2.5 µs analog counting inputs
25 µs analog auxiliary input |
| Output Voltage |
24 V |
| Output Voltage Limits |
19.2...30 V |
| Output Voltage Type |
DC |
| Nominal Output Current |
0.5 A |
| Discrete Output Logic |
Positive or negative configurable |
| Leakage Current |
0.1 mA at state 0 |
| Voltage Drop |
<3 V at state 1 |
| Load Inductance |
500 mH 4 Hz |
| Protection Type |
Overload protection electronic tripping manual or automatic reset
Short-circuit protection electronic tripping manual or automatic reset
Overload protection current limiter
Short-circuit protection current limiter |
| Fallback Status |
Hold last value configured
State 0 for output channels by default
State 0 or 1 for each channel configured |
| Cold Swapping |
Yes |
| Hot Swapping Fallback |
Fallback output depending on parameter setting configured mandatory standard network interface module
Fallback to 0 not configured mandatory standard network interface module
Fallback to 0 basic network interface module |
| Product Compatibility |
Mounting base STBXBA3000
Power distribution module STBPDT3100/3105 |
| Us Rated Supply Voltage |
24 V DC |
| Supply |
Power distribution module |
| Current Consumption |
60...100 mA 5 V DC logic bus |
| Insul Btwn Channels And Bus |
500 V |
| Marking |
CE |
| Overvoltage Category |
II |
| Status Led |
EN validation input status (EN) 1 LED Green)
Module status (RDY) 1 LED Green)
Reset input status (RST) 1 LED Green)
Counting input status (INA, INB) 1 LED per counting input Green)
Output status (OUT1, OUT2) 1 LED per output Green)
Module error (FLT) 1 LED Red) |
| Height |
1.11 in (28.1 mm) |
| Depth |
2.76 in (70 mm) |
| Width |
5.05 in (128.3 mm) |
| Product Certifications |
FM Class 1 Division 2
CSA
UL |
| Pollution Degree |
2 IEC 60664-1 |
| Operating Altitude |
<= 6561.68 ft (2000 m) |
| IP Degree Of Protection |
IP20 EN 61131-2 class 1 |
| Ambient Air Temp For Op |
-13…158 °F (-25…70 °C) without derating) |
| Ambient Air Temp For Storage |
-40…185 °F (-40…85 °C) |
| Relative Humidity |
95 % 140 °F (60 °C) without condensation |
| Vibration Resistance |
3 gn 58…150 Hz 35 x 7.5 mm symmetrical DIN rail
5 gn 58…150 Hz 35 x 15 mm symmetrical DIN rail
+/-0.35 mm 10…58 Hz |
