ClimaSys CV Axial motor ventilator. 24V DC 50Hz or 60Hz. 7.6W 50 Hz. Free flow rate with standard filter of 80 m3/h at 50 Hz. 170 x 150 x 62 mm. Cut-out dimensions of 125 x 125 mm. Outlet grille injected thermoplastic (ASA PC), Grey RAL 7035. Connections terminals by cable. 2 protective grille on the front and rear surfaces. Protection IP54.
Add to Quote CataloguePart Number | NSYCVF85M24DPF |
---|---|
Country of Origin | FR |
UPC | 785901921240 |
UPC11 | 78590192124 |
EAN | 3606480151224 |
Availability | N |
Lead Time | 53 |
UNSPSC | 39121303 |
ECCN | EAR99 |
HTs Code | 8414596590 |
Prop 65 | This product can expose you to chemicals including: Lead and lead compounds which is known to the State of California to cause Carcinogen & Reproductive harm. For more information go to www.p65warnings.ca.gov |
Discount Schedule | ES1 |
Return Indicator | Yes |
Depth | 2.44 inch |
Height | 6.69 inch |
Width | 5.91 inch |
Weight | 1.06 pound |
Range | ClimaSys |
---|---|
Product Name | ClimaSys CV |
Product Or Component Type | Fan |
Type Of Filter | Standard |
Flow Rate | Free flow rate with standard filter 21134.14 Gal/hr(US) (80 m3/h) 50 Hz |
Us Rated Supply Voltage | 10...27.6 V |
Input Voltage | 24 V DC |
Absorbed Power | 7.6 W 50 Hz |
In Rated Current | 0.3 A 50 Hz |
Noise Level < At | 46…49 dB |
Bearing Type | Ball |
Height | External 6.69 in (170 mm) |
Width | External 5.91 in (150 mm) |
Depth | External 2.44 in (62 mm) |
Cut-Out Dimensions | 125 x 125 mm |
Product Weight | 1.06 lb(US) (0.48 kg) |
Material | Outlet grille injected thermoplastic (ASA PC) |
Colour | Outlet grille Gray RAL 7035) |
Ambient Air Temp For Op | 14…158 °F (-10…70 °C) |
Ambient Air Temp For Storage | -40…158 °F (-40…70 °C) |
Maximum Pressure | 50 Pa flow rate 0 m³/h |
Connections - Terminals | Faston connector |
IP Degree Of Protection | IP54 |
Device Composition | 1 axial motor 2 protective grille on the front and rear surfaces 1 filter front of axial motor 1 outlet grille front 1 cut-out template 1 power cord |
Condition Of Use | Overfrequent filter replacement should be avoided Outside temperature must be 5 °C lower than inside temperature Surrounding environment must be relatively clean Filter must be cleaned and replaced regularly Flow rates depends on the work point, see ProClima software |
Category | 80036 - ENCLOSURE SYSTEMS ACCESSORIES |
Discount Schedule | ES1 |
GTIN | 00785901921240 |
Nbr. Of Units In Pkg. | 1 |
Country Of Origin | FR |
REACh Free Of SVHC | Yes |
EU RoHs Directive | Not compliant |
Mercury Free | Yes |
Warranty | 18 months |
Powered by
Based on 2 User Reviews
1619 Boyd St, Santa Ana, CA 92705
(714) 835-6211
(714) 972-2366