| Range Of Product |
Lexium integrated drive |
| Product Or Component Type |
Motion integrated drive |
| Device Short Name |
ILE |
| Motor Type |
Brushless dc motor |
| Number Of Motor Poles |
6 |
| Network Number Of Phases |
Single phase |
| [Us] Rated Supply Voltage |
48 V
24 V |
| Network Type |
DC |
| Communication Interface |
Ethernet/IP, Integrated |
| Length |
5.51 in (140 mm) |
| Communication Interface |
Medium speed of rotation and medium torque |
| Electrical Connection |
Printed circuit board connector |
| Holding Brake |
Without |
| Gear Box Type |
Without |
| Reduction Ratio |
1:1 |
| Nominal Speed |
3100 rpm 24 V
5000 rpm 48 V |
| Nominal Torque |
4.43 lbf.in (0.5 N.m) 24 V
4.43 lbf.in (0.5 N.m) 48 V |
| Transmission Rate |
125, 250, 500 kbauds |
| Mounting Support |
Flange |
| Motor Flange Size |
2.60 in (66 mm) |
| Number Of Motor Stacks |
2 |
| Centring Collar Diameter |
1.57 in (40 mm) |
| Centring Collar Depth |
0.08 in (2 mm) |
| Number Of Mounting Holes |
4 |
| Mounting Holes Diameter |
0.17 in (4.4 mm) |
| Circle Diameter Of The Mountin |
2.90 in (73.54 mm) |
| Feedback Type |
BLDC encoder |
| Shaft End |
Untapped |
| Second Shaft |
Without second shaft end |
| Shaft Diameter |
0.31 in (8 mm) |
| Shaft Length |
0.98 in (25 mm) |
| Supply Voltage Limits |
18…55.2 V |
| Current Consumption |
7000 mA peak
5500 mA maximum continuous |
| Associated Fuse Rating |
16 A |
| Commissioning Interface |
RS485 Modbus TCP 9.6, 19.2 and 38.4 kbauds) |
| Input/Output Type |
4 signals (each be used as input or output) |
| Voltage State 0 Guaranteed |
-3...4.5 V |
| Voltage State 1 Guaranteed |
15...30 V |
| Discrete Input Current |
10 mA at 24 V on/STO_A safety input
3 mA at 24 V on/STO_B safety input
2 mA at 24 V 24 V signal interface |
| Discrete Output Voltage |
23...25 V |
| Maximum Switching Current |
100 mA per output
200 mA total |
| Protection Type |
Short circuit of the output voltage
Safe torque off
Overload of output voltage |
| Supply Current |
0.1 A power stage disabled)
7 A 48 V
9.5 A 24 V |
| Nominal Output Power |
162 W 24 V
262 W 48 V |
| Peak Stall Torque |
7.08 lbf.in (0.8 N.m) 24 V
7.08 lbf.in (0.8 N.m) 48 V |
| Continuous Stall Torque |
4.78 lbf.in (0.54 N.m) |
| Detent Torque |
0.94 lbf.in (0.106 N.m) |
| Speed Feedback Resolution |
12 points/turn |
| Accuracy Error |
+/- 0.5 ° |
| Rotor Inertia |
0.34 kg.cm² |
